1452343 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector front mounting, Universal, 5-position, Socket, straight, M12, coding: B, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire Your advantages Preassembled with litz wires for immediate use• Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1452343 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB24 Product key ABQCVE GTIN 4046356543620 Weight per piece (including packing) 24 g Weight per piece (excluding packing) 22 g Customs tariff number 85366990 Country of origin DE SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 1 (10)

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. General Contact connection method: Crimp connection Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory Safety note SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 2 (10)

section of the product at phoenixcontact.com/products

  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Front mounting Pg9 Product properties Product type Circular connectors (device side) Application Signal Sensor type Universal Number of positions 5 No. of cable outlets 1 Shielded no Coding B Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Material Molding compound PUR () Flammability rating according to UL 94 V0 Seal material FKM Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Stainless steel Conductor material Tin-plated Cu litz wires Electrical properties Rated surge voltage 1.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 60 V Nominal current IN 4 A Max. conductor resistance 57.6 Ω/km SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 3 (10)

Connection method Individual wires Contact connection type Socket Conductor cross section 0.34 mm² Tightening torque 3 Nm ... 4 Nm (Installation-side) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Coding B Connection 2 Head design free cable end Cable/line Cable length 0.5 m Cable type TPE litz wire Signal type/category Universal Wire diameter incl. insulation 1.2 mm ±0.07 mm Single wire, color black, brown,blue, white, gray Cable cross section 0.34 mm² Conductor material Tin-plated Cu litz wires Conductor structure signal line 7x 0.25 mm AWG signal line 22 Material wire insulation TPE Thickness, insulation 0.21 mm Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Cable resistance 57.6 Ω/km Cable insulation resistance ≥ 20 MΩ*km -40 °C ... 85 °C (cable, fixed installation)Ambient temperature (operation) -25 °C ... 85 °C (Cable, flexible installation) Environmental and real-life conditions SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 4 (10)

IP65/IP67/IP69/IP69KDegree of protection IP65/IP67/IP69K -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 5 (10)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 5x0,34mm 2 1 I = current strength, T = ambient temperature Schematic diagram 3 4 2 1 Pin assignment M12 socket, 5-pos., B-coded, female side SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 6 (10)

Contact assignment of the M12 socket SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 7 (10)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1452343  cUL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

60 V 4 A 22 - 22 -

 UL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2  cULus Recognized Approval ID: E221474-20140616 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

60 V 4 A 22 - 20 -

SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 8 (10)

ECLASS-13.0 27440103 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 9 (10)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-E-M12FSB-5CON-PG9/0,5 VA - Device connector front mounting 1452343 https://www.phoenixcontact.com/us/products/1452343 Jan 22, 2025, 12:10 AM Page 10 (10)