1437575 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector, rear mounting, CANopen®, DeviceNet™, 5-position, PUR halogen-free, red lilac RAL 4001, shielded, Flush-type male connector, straight, M12-SPEEDCON, coding: A , on free cable end, Rear mounting, CAN Bus / DeviceNet, cable length: 1 m, CANopen®/DeviceNet™, PUR, violet, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239663 Your advantages Preassembled with cables in various standard lengths for immediate use• Customer-specific assemblies and cable lengths can be supplied Sealed on the cable side for optimum tightness of seal Cable designs for all common networks and fieldbuses For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1437575 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB25 Product key ABQDGB Catalog page Page 427 (C-2-2019) GTIN 4046356457705 Weight per piece (including packing) 81.6 g Weight per piece (excluding packing) 81.6 g Customs tariff number 85444290 Country of origin DE SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 1 (13)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products Safety note SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 2 (13)
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting Connection method CAN Bus / DeviceNet Product properties Product type Circular connectors (device side) Sensor type CANopen® Number of positions 5 No. of cable outlets 1 Shielded yes Coding A Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material FKM Outer sheath, material PUR Electrical properties Rated surge voltage 1.5 kV Insulation resistance 100 MΩ

48 V ACNominal voltage UN

60 V DC

Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) Transmission medium Copper Connection data Conductor connection Connection method CAN Bus / DeviceNet Contact connection type Crimp contacts

2 NmTightening torque

SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 3 (13)

Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Flush-type male connector Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding A Connection 2 Head design free cable end Cable/line Cable length 1 m CANopen®/DeviceNet™, PUR, violet [920] Dimensional drawing Cable weight 90 kg/km UL AWM Style 21198 (80°C/300 V) Number of positions 4 Shielded yes Cable type CANopen®/DeviceNet™, PUR, violet [920] Conductor structure 2xAWG24/19+2xAWG22/19 Conductor structure signal line 19x 0.13 mm AWG signal line 24 2x 0.25 mm² (Data cable) 2x 0.34 mm² (Power supply) Conductor cross section 1x 0.34 mm² (Drain wire) 1.95 mm ±0.05 mm (Data cable)Wire diameter incl. insulation 1.4 mm ±0.05 mm (Power supply) External cable diameter 6.7 mm ±0.3 mm SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 4 (13)

Outer sheath, material PUR External sheath, color red lilac RAL 4001 Conductor material Tin-plated Cu litz wires Foamed PE (Data cable)Material wire insulation PE (Power supply) Single wire, color red-black, blue-white Twisted pairs 2 cores to the pair Type of pair shielding Plastic-coated aluminum foil, aluminum side outside Overall twist 2 pairs around a drain wire in the center to the core Optical shield covering 80 % ≥ 5 GΩ*km (Data cable)Insulation resistance ≥ 5 GΩ*km (Power supply) ≤ 181.80 Ω/km (Data cable)Loop resistance ≤ 114.80 Ω/km (Power supply) Wave impedance 120 Ω ±10 % (with 1 MHz) Cable capacity nom. 40 nF/km (Data cable) Nominal voltage, cable ≤ 300 V (Peak value, not for high-power applications) Test voltage Core/Core 2000 V (50 Hz, 1 min.) Test voltage Core/Shield 2000 V (50 Hz, 1 min.) Minimum bending radius, fixed installation 5 x D Minimum bending radius, flexible installation 10 x D Max. bending cycles 5000000 ≤ 22.9 dB/km (with 1 MHz) ≤ 16.4 dB/km (At 500 kHz) Shield attenuation ≤ 9.5 dB/km (At 125 kHz) in accordance with DIN VDE 0472 part 815Halogen-free according to IEC 60754-1 UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) UL 1581, Section 1100 and UL 2556, Section 9.1 (HFT/FT2) IEC 60332-1-2 Flame resistance in accordance with ISO 6722-1 5.22 (UN ECE-R 118.01) Other resistance Low adhesion -40 °C ... 80 °C (cable, fixed installation) -30 °C ... 70 °C (Cable, flexible installation) -20 °C ... 60 °C (for installation) Ambient temperature (operation) -20 °C ... 60 °C (cable, drag chain applications) Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 5 (13)

-25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) Standards and regulations Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 6 (13)

2,8 M12x1PG9 1718 Dimensional drawing Schematic diagram 4 3 Pin assignment M12 male connector, 5-pos., A-coded, male side SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 7 (13)

13,5 1x45° Ø15,3 max.4,5 +0,1 +0,1 Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 8 (13)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 5x0,34mm 2 1 I = current strength, T = ambient temperature Circuit diagram RD BK BU WH SH1 SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 9 (13)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1437575  EAC Approval ID: B.01687  UL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

30 V 2 A - 24 -

 cUL Recognized Approval ID: E221474-20220908 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 30 V 1.5 A - -  UL Recognized Approval ID: E221474-20220908 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

30 V 2 A - -

SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 10 (13)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 11 (13)

Environmental product compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 12 (13)

SACC-PG9-KD-NUT-SH - EMC nut 1440177 https://www.phoenixcontact.com/us/products/1440177 EMC nut, Threads, Pg9, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239704 Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector, rear mounting 1437575 https://www.phoenixcontact.com/us/products/1437575 Sep 11, 2023, 5:59 AM Page 13 (13)