1409211 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, Range of articles: PRC 35, housing material: PPE, color: black, number of positions: 5, max. conductor cross section: 2.5 mm2, rated voltage: 690 V AC, rated current: 24 A, Connection method: Crimp connection, Contact connection type: Pin, cable length: 150, This item is also available with other cable lengths. For your specific requirements, please contact your local PHOENIX CONTACT subsidiary. Your advantages Up to 75% smaller in size than industrial connectors with the same rating• Locking mechanism can be unlocked manually or using a tool Ideal for indoor and outdoor use due to weatherproof materials Either preassembled or designed for assembly Commercial data Item number 1409211 Packing unit 10 pc Minimum order quantity 10 pc Sales key AB03 Product key ABLCAA Catalog page Page 77 (NTK-2014) GTIN 4046356864336 Weight per piece (including packing) 48.87 g Weight per piece (excluding packing) 48.87 g Customs tariff number 85444290 Country of origin PL PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 1 (11)

Order information: This item is also available with other cable lengths. For your specific requirements, please contact your local PHOENIX CONTACT subsidiary. Note on application For assembly notes, please refer to the packing slip Safety note

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Operate the connector only when it is fully plugged in.
  • Operate the connector only when it is fully plugged in and interlocked. Safety note PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 2 (11)
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Panel feed-through Product family PRC 35 Number of positions 5 Connection profile 4+PE Coding AD Data management status Article revision 14 Insulation characteristics Protection class II (double or reinforced insulation) Degree of pollution 2 Connection data Conductor connection Tightening torque 2.5 Nm ±0.1 Nm (Tightening torque nut) Dimensions Dimensional drawing Width 34.5 mm Height 38.4 mm Length 179.5 mm Hole diameter 25.5 mm Wrench size, union nut 32 mm Electrical properties Rated voltage (III/2) 690 V 690 V AC (III/2.00) in accordance with IEC 61984 500 V AC (III/2.00) in accordance with IEC 61535/2 PfG 1915 600 V AC / DC (III/2.00) in accordance with UL 2238 / UL 2237 Nominal voltage ATD 500 V DC (III/2.00) in accordance with IEC 61535 PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 3 (11)

Rated surge voltage (III/2) 8 kV 24 A (With 2.5 mm² conductor cross section in accordance with IEC 61984) 20 A (With 2.5 mm² conductor cross section in accordance with IEC 61535) 14.1 A (With 2.5 mm² conductor cross section and 85 °C in accordance with 2 PfG 1915) Rated current

19 A (with AWG 14, in accordance with UL 2237)

Insertion/withdrawal cycles 100 (Test specification: IEC 60512-13-2) Insertion force 50 N ±10 N (Test specification: IEC 60512-13-2) Material specifications Color black Color of the housing part black Silicon (Contact storage) EPDM (Flat gasket) PPE (Contact carriers) PPE (Nut) CuZn (Contact material, Pb < 0.1) Material EPDM (Seal, pin connector pattern) Flammability rating according to UL 94 V0 Insulating material group I / CTI600 Seal material EPDM Housing material PPE Contact material Cu alloy Contact surface material Ag Contact carrier material PPE O-ring material Silicon Material for screw connection PPE Connector Pull-out-force 175 N ±50 N Cable/line Cable length 150 mm Single wire, material PVC Wire diameter incl. insulation 3.65 mm ±0.15 mm Single wire, cross section 2.5 mm² Single wire, color blue, black, gray, brown, green/yellow Cable cross section 2.5 mm² Halogen-free no PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 4 (11)

Mounting type Rear mounting Thread type M25 x 1,5 () Environmental and real-life conditions Ambient conditions Degree of protection (when plugged in) IP66 / IP68 (2m / 24h) / IP69K Degree of protection (not plugged in) IP65 (Lengthwise waterproofing) Degree of protection IP66 / IP68 (2m / 24h) / IP69K Category of shock impact IK08 (-25°C) Ambient temperature (operation) -40 °C ... 105 °C (dependent on the derating curve) Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) 5 °C ... 85 °C Standards and regulations IEC 61984:2008 EN 61984:2008 DIN EN IEC 61535:2020 IEC 61535:2019 2 PfG 1915/03.2015 UL 2237 Ed.1:2021-01-08 Standards/specifications CSA C22.2 No. 182.3-16 Ed.2:2019-01 PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 5 (11)

29,5 Ø35 x34 Dimensional drawing PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 6 (11)

Ø25,5 ±0,2 -0,2 16,4 ±0,2 Housing cutout PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 7 (11)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1409211  UL Listed Approval ID: E221474-20150513 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 30 A - - 2.5  cUL Listed Approval ID: E221474-20150513 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

600 V 30 A - 2,5 -

 TÜV Rheinland Approval ID: R 60168292 0001 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

690 V 35 A - -

 TÜV Rheinland Approval ID: R 60117908 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 500 V 21.4 A - -  cUL Listed Approval ID: E468743-20190809 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

600 V 24 A - -

 UL Listed Approval ID: E468743-20190809 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

600 V 30 A - -

 TÜV Rheinland Approval ID: R 60168255 0001 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

500 V 32 A - -

PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 8 (11)

Approval ID: TAE00002KM PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 9 (11)

ECLASS-11.0 27440103 ECLASS-12.0 27440103 ECLASS-13.0 27440103 ETIM ETIM 9.0 EC003570 UNSPSC UNSPSC 21.0 39121400 PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 10 (11)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com PRC 5-FT25-MC2,5-150 - Device connector rear mounting 1409211 https://www.phoenixcontact.com/us/products/1409211 Oct 29, 2024, 7:44 AM Page 11 (11)