1408436 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Device connector front mounting, Universal, 4-position, Flush-type female connector, straight, M12-Standard, coding: A , on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1238771 Your advantages Pre-assembled with litz wires for immediate use• Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness For high transmission safety: shield connection to the housing with optional EMC nut Commercial Data Item number 1408436 Packing unit 1 pc Minimum order quantity 1 pc Sales Key AB24 Product Key ABQCDB Catalog Page Page 40 (C-2-2019) GTIN 4046356828499 Weight per Piece (including packing) 44.6 g Weight per Piece (excluding packing) 35.5 g Customs tariff number 85444290 Country of origin DE SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 1 (13)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products Safety note SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 2 (13)
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Front mounting M20 x 1,5 Connection method Individual wires Product properties Product type Circular connectors (device side) Number of positions 4 Sensor type Universal No. of cable outlets 1 Shielded no Coding A Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material NBR Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Brass Conductor material Tin-plated Cu litz wires Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

250 V (AC)Nominal voltage UN

250 V (DC)

Transmission medium Copper SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 3 (13)

Connection method Individual wires Type of contact Crimp contacts Conductor cross section 0.34 mm²

3 NmTightening torque

Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Flush-type female connector Head cable outlet straight Head thread type M12 Head locking type Standard Coding A Connection 2 Head design free cable end Cable/line Cable length 0.5 m Cable type TPE litz wire Signal type/category Universal Wire diameter incl. insulation 1.2 mm ±0.07 mm Single wire, color brown, white, blue, black Conductor material Tin-plated Cu litz wires Conductor structure signal line 7x 0.25 mm AWG signal line 22 Material wire insulation TPE Thickness, insulation 0.21 mm Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Cable resistance ≤ 57.6 mΩ/m Cable insulation resistance ≥ 20 MΩ*km -40 °C ... 85 °C (cable, fixed installation)Ambient temperature (operation) -25 °C ... 85 °C (Cable, flexible installation) SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 4 (13)

Environmental and real-life conditions Ambient conditions IP67 IP69K Degree of protection IP67 -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standards/specifications IEC 61076-2-101 SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 5 (13)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 4x0,34mm 2 1 I = current strength, T = ambient temperature Schematic diagram Pin assignment M12 socket, 4-pos., A-coded, view female side SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 6 (13)

M20x1,5 M12x1 500 19,6 12,6 Dimensional drawing Circuit diagram BN1 BK4 BU3 WH SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 7 (13)

 EAC Approval ID: B.01687  cULus Recognized Approval ID: E221474-20140616 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

250 V 4 A 22 - 20 -

SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 8 (13)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 9 (13)

Environmental Product Compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 10 (13)

https://www.phoenixcontact.com/us/products/1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors PROT-M12 SH - Screw plug 1503302 https://www.phoenixcontact.com/us/products/1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 11 (13)

https://www.phoenixcontact.com/us/products/1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry A-INL-M20-N-S - Counter nut 1411242 https://www.phoenixcontact.com/us/products/1411242 Counter nut, for threads M20 x 1.5, color: silver SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 12 (13)

PROT-M12 MS-M - Screw plug 1414148 https://www.phoenixcontact.com/us/products/1414148 Screw plug, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239065 Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-E-M12FS-4CON-M20/0,5 - Device connector front mounting 1408436 https://www.phoenixcontact.com/us/products/1408436 Jun 7, 2023, 5:24 AM Page 13 (13)