13POE GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 2 13POE_48-10-A – Rev. 2020-1.3 Specifications subject to change without notice. 13POE_48-10-A Series 10W and 13W - Single Output - Wide Input - Isolated & Regulated DC-DC Converter Efficiency up to 84% Over load protection Short circuit protection (SCP) Operating temperature range: -40°C ~ +85°C Meet CISPR22/EN55022 CLASS A Six-sided metal shield Industry standard pinout DC-DC Converter 10 and 13 Watt The 13POE_48-10-A module is designed to extract power from a conventio- nal twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard. The 13POE_48-10-A signature and control circuit provides the PoE compati- bility signature and power classification required by the Power Sourcing Equipment (PSE) before applying up to 15W power to the port. The 13POE_48-10-A is compatible with Class 0 to Class 3 equipment. The high efficiency DC/DC converter operates over a wide input voltage range and provides a regulated low ripple and low noise output. The DC/ DC converter also has built-in overload and short-circuit output protection. Example: 13POE_4803-10-A 13POE = Power Over Ethernet series; 48 = 48Vin; 03 = 3.3Vout; 10 = Watt; A = Pinning Note: 1. All specifications measured at Ta = 25°C, humidity <75%, nominal input voltage and rated output load unless otherwise specified. 2. In this datasheet, all the test methods of indications are based on corporate standards. 3. Only typical models listed, other models may be different, please contact our technical person for more details. 4. Our company offer custom products. 5. Specifications subject to change without notice. Input specifications Item Test condition Min Typ Max Units Operating input voltage 36 48 57 V Maximum input current TA= 25°C 0.45 A Maximum input voltage Continuous Transient (100ms) VDC VDC Output specifications Item Test condition Min Typ Max Units Voltage set point -2 2 %Vo Line regulation Vi =Vi,min to Vi,max 0.5 %Vo Load regulation Io = Io,min to Io,max 0.5 %Vo Rated output current 13POE_4803 13POE_4805 13POE_4812 0.06 0.06 0.06 1.1 A A A External load capacitance Min ESR>10mΩ 330 1000 µF Output Ripple & Noise Peak-to-peak:

5 Hz to 20 MHz

TA= -40°C~85°C 60 150 mV Start delay time Io = Io, max 30 ms Turn-on time Io = Io, max 20 ms Voltage overshoot Io = Io, max; TA= 25°C 2 5 %Vo Dynamic response 0.1A/uS 50%~75%~50%Inom Vin=48V 135/ 500 mV/ uS Common specifications Short circuit protection: Continous, automatic recovery Cooling: Free air convection Operation temperature range: -40°C~+85°C Storage temperature range: -55°C~+125°C Case/board temperature: -40~100°C MAX Lead temperature: 300°C MAX, 1.5mm from case for 10 sec Storage humidity range: 5% MIN, 95% MAX Temperature coefficient: 0.02%/°C Switching frequency: 260kHz TYP Case material: Plastic (UL94-V0) Weight: 13g Protection specifications Item Test condition Min Typ Max Units Input over voltage lockout* NO V Input under voltage lockout*

  • Turn-on point
  • Turn-off point 35.1 31.1 VDC Output over voltage lockout
  • Mode: NO
  • Static
  • Dynamic V V Output over current protection
  • Mode: Hiccup
  • Protection 48Vin 3.5 A Over temperature protection
  • Mode: NO
  • Hysteresis temp.
  • Protection * Ta = 25°C; Io =1A Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Input-output 1mA-1min

500 VDC

Maximum input voltage 60 VDC

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 2 13POE_48-10-A – Rev. 2020-1.3 Specifications subject to change without notice. 13POE_48_10A Series 13W - Single Output - Wide Input - Isolated & Regulated DC-DC Converter Part Number Input Voltage [VDC] Nominal Range Output Voltage [VDC] Output Current [A, min/max] Input Current [A, max] Efficiency [%, Typ.] 13POE_4803-10-A 48 36~57 3.3 0.06/3 0.45 82 13POE_4805-10-A 48 36~57 5 0.06/2 0.45 83 13POE_4812-13-A 48 36~57 12 0.06/1.1 0.45 84 Typical application circuit Mechanical dimensions Pin Funktion

1 VA1

2 VA2

3 VB1

4 VB2

5 CP1

6 CP2

7 GND

8 Vout

9 TRIM

Cout: 330uf 25V AL-CAP Cout2:1uf CEREMIC. Note: Unit: mm[inch] General tolerances X.Xmm: ±0.50mm [±0.020inch] General tolerances X.XXmm: ±0.25mm [±0.010inch]