13LED20 ANADIGICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
1300nm Surface Emitting LED
FEATURES
- Planar Structure
- Dielectric Passivation
- 100% Purge Burn-in
APPLICATIONS
- Optical Data Communications Systems
- E1 / T1 Communication Systems
- Analog Transmission Systems 13LED20-1xx TO can Package 13LED20-5xx FC Receptacle PRODUCT DESCRIPTION The 13LED20 is a 1300nm surface emitting LED. It is intended for use in low cost, short haul multi-mode optical communication systems operating to 100MB/s and for use in optical test and measurement equipment. The device can be assembled in a TO can or mounted in an SC, ST or FC receptacle. Custom packages are an option.
ELECTRICAL CHARACTERISTICS
Table 1: Electrical Specifications PARAMETER MIN TYP MAX UNIT Total output power - 1 - mW Minimum coupled power (1) 30 - - μW Peak wavelength 1260 1300 1340 nm Spectral width - 120 - nm Rise / Fall time - 6 - ns (1) Coupled to 62.5/125 fiber @ 100mA forward current Table 2: Absolute Maximum Ratings PARAMETER MIN MAX UNIT Forward Current - 125 mA Operating Case Temperature -40 +85 ºC Storage Temperature -40 +85 ºC Soldering temperature (10 seconds) - +250 ºC Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
Rev 1.0 2
ORDERING INFORMATION
Number of pins: 2, 3 Cap: Window, lens. AR / Non-AR coated. Cap plating: Gold or nickel 13LED20-5xx Number of pins: 2, 3 Connector Type: SC, ST or FC. Aligned for APC or UPC Please contact Anadigics for the specific part number and pinout that suits your needs ANADIGICS, Inc.
829 Flynn Road
Camarillo, California 93012, U.S.A. Tel: +1 (805) 445-4500 Fax: +1 (805) 445-4502 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibility for inaccura cies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited.