1359727 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M23, Device connector front mounting, series: SH, angled rotatable, shielded: yes, for standard and SPEEDCON interlock, No. of pos.: 6+4+4+PE, 6-pos. data element, contact connection type: Socket, Crimp connection, Axial O-ring, 4x Ø 3.2, flange dimensions: 26 mm x 26 mm Your advantages Easy connection, thanks to infinitely adjustable cable outlet direction up to 310°• Transmission of signals, data, and power in just a single connector Safe use in the field, thanks to high degree of protection Consistent EMC protection for reliable connection solutions in the industrial environment Commercial data Item number 1359727 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB35 Product key ABRCDM GTIN 4063151690816 Weight per piece (including packing) 22.22 g Weight per piece (excluding packing) 22.22 g Customs tariff number 85366990 Country of origin DE SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 1 (10)

Order information: Crimp contacts, 6x Ø 0.6 mm, 4x Ø 1 mm, 5x Ø 2 mm, order separately Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the Safety note SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 2 (10)

cable without twisting it.

  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting 4x Ø 3.2 Product properties Product type Circular connectors (device side) Application Hybrid Dimensions Housing Flange dimensions 26 mm x 26 mm Mechanical properties Mechanical data Insertion/withdrawal cycles 100 Connector Type angled rotatable Insulating body Note Order information: Crimp contacts, 6x Ø 0.6 mm, 4x Ø 1 mm, 5x Ø 2 mm, order separately Protection against electric shock IEC 61984 and VDE 0623 Insulation body material PA 6.6 Insertion/withdrawal cycles 100 Connection method Crimp connection Contact switching type Socket Application Hybrid Number of positions 15 Connection profile 6+4+4+PE, 6-pos. data element Contact diameter Power contacts 2 mm Litz wire cross-section Power contacts min. 0.25 mm² Litz wire cross-section Power contacts max. 4 mm² Rated current Power contacts 30 A Note for max. connection cross section Rated surge voltage 6 kV Rated voltage (II/3) power contact 850 V DC Rated voltage (III/3) power contact 630 V AC SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 3 (10)

Contact diameter Signal contacts 1 mm Litz wire cross-section Signal contacts min. 0.06 mm² Litz wire cross-section Signal contacts max. 1 mm² Nominal current per signal contact 8 A Note for max. connection cross section Rated surge voltage 1.5 kV Rated voltage (III/3) signal contact 50 V Contact diameter Data contacts 0.6 mm Litz wire cross-section Data contacts min. 0.08 mm² Litz wire cross-section Data contacts max. 0.25 mm² Rated current per data contact at 25°C 2 A Note for max. connection cross section Rated voltage Data contacts 50 V Rated surge voltage 1.5 kV Installation height 2000 m (4000 m at 300 V system voltage in accordance with DIN EN 606664-1) Housing Note The suitability for assembly must be checked when fully assigned with maximum wire cross sections. Housing material Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD- Zn) Flange dimensions 26 mm x 26 mm Type of locking for standard and SPEEDCON interlock Pg screw connection none IP67 IP68 Degree of protection (plugged in) IP69K Thread type M23 Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 115 °C (see derating curve) SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 4 (10)

Ø 0,1 A 4xM3 Ø20,1 +0,1 A ±0,5 19,8 -0,2 Rz16 area for Rz16 A-A Installation dimensions SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 5 (10)

D 10 765 PE 9 8 3 2 B C A Socket pin assignment SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 6 (10)

0 10 20 30 40 50 60 70 80 90 100 110 I [A]  [°C] = 3x4 mm + 4x1 mm + 6x0,25 mm 120 I = current strength, ϑ = ambient temperature, power contacts A ... C: 3 x up to 30 A, signal contacts: 4 x 2 A constant, data contacts: 6 x 1 A constant SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 7 (10)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1359727  cUL Recognized Approval ID: E153698-20181206 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 21.4 A 12 - 12 - Control 50 V 4 A 18 - 18 -  UL Recognized Approval ID: E153698-20181206 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Power 600 V 24 A 12 - 12 - Control 50 V 4 A 18 - 18 - cULus Recognized SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 8 (10)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 9 (10)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SH-8ESD68AAD00S - Device connector front mounting 1359727 https://www.phoenixcontact.com/us/products/1359727 Dec 6, 2024, 4:13 AM Page 10 (10)