1292315

1292315 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. EMC filter (mains filter) for 1-phase AC systems, for mounting on NS 35, integrated surge protective device (UL Type 2CA SPD, IEC Type 2 SPD), nominal voltage: 120 V AC, nominal current: 5 A Your advantages Reliable protection of sensitive equipment against high-frequency conducted interference and against surge voltage and surge current pulses• Effective attenuation with current-coupled coils and X and Y capacitors Versatile in use with universal circuit design Effective surge protection on the input and output side of the EMC filter User-friendly handling thanks to easy assembly and installation with screw connection technology (UT) Commercial data Item number 1292315 Packing unit 1 pc Minimum order quantity 1 pc Sales key CL29 Product key CLC161 GTIN 4063151525026 Weight per piece (including packing) 707.2 g Weight per piece (excluding packing) 707.2 g Customs tariff number 85480090 Country of origin CN SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 1 (10)

Note Only for use in IT systems between L-PE if the exposed conductive parts of the equipment of the low-voltage electrical installation are connected to the grounding system of the transformer station. (common grounding of the HV transformer station and the exposed conductive parts of the LV consumer installation. RE = RA in accordance with IEC 60364-4-44:2007 Figure 44.A1 and Table 44.A1). Product properties Product type EMC filters TN TT IEC power supply system IT Type DIN rail module, one-piece Number of positions 2 Surge protection fault message Optical, remote indicator contact Insulation characteristics Overvoltage category III Pollution degree 2 IEC test classification T2 EN type T2 Number of ports Two Electrical properties Maximum power dissipation for nominal condition ≤ 1 W Indicator/remote signaling Connection name Remote fault indicator contact Switching function Changeover contact 12 V AC ... 250 V ACOperating voltage

250 V DC (250 mA DC)

100 mA AC ... 1 A ACOperating current

1 A DC (48 V DC)

Connection method Screw terminal blocks Screw thread M3 Conductor cross-section flexible 0.5 mm² ... 6 mm² Conductor cross-section rigid 0.5 mm² ... 6 mm² Conductor cross-section AWG 20 ... 10 SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 2 (10)

Color light gray (RAL 7035) Flammability rating according to UL 94 V-0 Insulating material PC PC-GF10Housing material Metal Mechanical properties Mechanical data Open side panel No Protective circuit L-N L-PE Mode of protection N-PE

120 V AC (TN)

120 V AC (TT - only in use with RCD)

120 V AC (IT - see note)

Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC 150 V AC Rated load current IL 5 A (70 °C) Protective conductor current IPE ≤ 0.5 mA Reference test voltage UREF 132 V AC Nominal discharge current In (8/20) µs 5 kA Voltage protection level Up ≤ 0.6 kV

229 V AC (5 s / withstand mode)TOV behavior at UT (L-N)

229 V AC (120 min / withstand mode)

229 V AC (5 s / withstand mode)

175 V AC (120 min / withstand mode)

TOV behavior at UT (L-PE)

1332 V AC (200 ms / safe failure mode)

TOV behavior at UT (N-PE) 1200 V AC (200 ms / safe failure mode) Response time tA ≤ 100 ns SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 3 (10)

2x 1 µF ±20 % (X2-250 V)Capacity (L-N) 10 nF ±20 % (X2-275 V) Capacity (L-PE) 3.3 nF ±20 % (Y2-250 V) Capacity (N-PE) 3.3 nF ±20 % (Y2-250 V) Max. required back-up fuse 10 A (MCB C) Input attenuation aE, sym. 20 dB (≥ 100 kHz / 50 Ω) Input attenuation aE, asym. 30 dB (≥ 1 MHz / 50 Ω) Short-circuit current rating ISCCR 6 kA AC Filter data Discharge resistance 940 kΩ (±1 %) Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 70 °C Altitude ≤ 2000 m (amsl) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 15g (Half-sine / 6 ms / 100x ±X, ±Y, ±Z) Vibration (operation) 1g (1-150 Hz/10 cycles/XYZ) Approvals Conformity/Approvals UL, USA / Canada Class I, Div. 2, Groups A, B, C, D UL specifications Maximum continuous operating voltage MCOV 150 V AC Short-circuit current rating (SCCR) 10 kA Voltage protection rating VPR 500 V Nominal discharge current In 5 kA L-N L-G Mode of protection N-G Nominal voltage 120 V AC Rated load current IL 5 A (60 °C) Power distribution system Single phase Nominal frequency 50/60 Hz SPD Type 2CA UL indicator/remote signaling Operating voltage 12 V AC ... 250 V AC DC operating voltage 250 V DC (250 mA DC) AC operating current 100 mA AC ... 1 A AC SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 4 (10)

DC operating current 1 A DC (48 V DC) UL connection data Conductor cross-section AWG 12 ... 10 Standards and regulations Standards/specifications IEC 61643-11 Note 2011 Standards/specifications EN 61643-11 Note 2012 + A11:2018 Standards/specifications EN 60939-2 Note 2006 + AMD1:2023 Mounting Mounting type DIN rail: 35 mm SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 5 (10)

59,7 134 132,3 138,4 Diagram I [A]  [°C] -20 -10 0 10 20 30 40 50 60 70 SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 6 (10)

f [MHz] 0,01 0,1 1 100,001 100 = symmetrical = asymmetric 50 Ω-System Circuit diagram PE N L PE IN Line Cx Cx Cx Cy Cy OUT Load NO COM NC   SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 7 (10)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1292315  cUL Recognized Approval ID: FILE E 330181  UL Recognized Approval ID: FILE E 330181  cCSAus Approval ID: 80231371 UL Comp Hazloc CA US Approval ID: E340736 SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 8 (10)

ECLASS-13.0 27420208 ECLASS-15.0 27420208 ETIM ETIM 9.0 EC002564 UNSPSC UNSPSC 21.0 39121500 SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 9 (10)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 7(a) China RoHS EFUP-25Environment friendly use period (EFUP) An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC Hexahydromethylphthalic anhydride(CAS: n/a)REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SFP2-1S-1-5A-120AC-UT - EMC filter surge protection device 1292315 https://www.phoenixcontact.com/us/products/1292315 Nov 7, 2025, 12:24AM Page 10 (10)