1238537 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, Power, 5-position, Pin, straight, M12, coding: K M12, Rear mounting, M16 x 1.5, Individual wires, cable length: 1 m, 2.50 mm2, PEX litz wire, Item is lead- free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages For compact devices: transmit high power in a confined space• Easy-to-install, optimized XL housing contour with wrench size 19 Mechanical tightening limitation for long-term-stable gasket Preassembled with litz wires for immediate use Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness For high transmission safety: shield connection to the housing with optional EMC nut Commercial data Item number 1238537 Packing unit 1 pc Minimum order quantity 25 pc Product key ABQCGG GTIN 4063151388416 Weight per piece (including packing) 22.22 g Weight per piece (excluding packing) 22.22 g Country of origin DE SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 1 (10)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. General Lock nut is included in the scope of delivery Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory Safety note SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 2 (10)

section of the product at phoenixcontact.com/products

  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly instructions With flat nut Product properties Product type Circular connectors (device side) Sensor type Power Number of positions 5 No. of cable outlets 1 Shielded no KCoding K Thread type M12 Insulation characteristics Overvoltage category III Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material FKM Contact material CuZn Contact surface material Au Contact carrier material PA Material for screw connection Zinc die-cast, nickel-plated Conductor material Tin-plated Cu litz wires Electrical properties Rated voltage in acc. with IEC 61076-2-101 630 V 6 kVRated surge voltage 6 kV Nominal voltage UN 630 V Nominal current IN 16 A Test voltage 6 kV SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 3 (10)

Test voltage Core/Core 6 kV Connection data Conductor connection Connection method Individual wires Contact connection type Pin Conductor cross section 2.5 mm² Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Pin Head cable outlet straight Head thread type M12 Coding K Cable/line Cable length 1 m Cable type PEX litz wire Signal type/category Power Single wire, color black 1, black 2, black 3, black 4, green/yellow Cable cross section 2.5 mm² Conductor material Tin-plated Cu litz wires AWG signal line 14 Material wire insulation PE-X Test voltage Core/Core 6 kV Halogen-free according to IEC 60754-1 Flame resistance in acc. with UL FT-2 Other resistance Hydrolysis-resistant -40 °C ... 85 °C (without mechanical actuation) -40 °C ... 85 °C (without mechanical actuation) Ambient temperature (operation) -25 °C ... 105 °C Environmental and real-life conditions Ambient conditions IP67Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket) SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 4 (10)

-40 °C ... 85 °C (without mechanical actuation) -25 °C ... 105 °C Ambient temperature (operation) -40 °C ... 105 °C (cable, fixed installation) Standards and regulations Flame resistance in acc. with UL FT-2 Other resistance Hydrolysis-resistant M12 Standard designation M12 connector Standards/specifications IEC 61076-2-111 Note In line with SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 5 (10)

Connector pin assignment of M12 plug, 5-pos., K-coded, pin side view Diagram 0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 4x2,5mm 2 1 I = current strength, T = ambient temperature SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 6 (10)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1238537  cULus Recognized Approval ID: E468743-20180113 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

600 V 16 A 14 - 14 -

SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 7 (10)

ECLASS-11.0 27060308 ECLASS-12.0 27060308 ECLASS-13.0 27060308 ETIM ETIM 9.0 EC002599 SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 8 (10)

Environmental product compliance Environmentally friendly use period: unlimited = EFUP-eChina RoHS No hazardous substances above threshold values SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 9 (10)

https://www.phoenixcontact.com/us/products/1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush- type plugs and I/O devices in the field Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-DSI-M12MSK-4PE-M16XL/1,0X - Device connector rear mounting 1238537 https://www.phoenixcontact.com/us/products/1238537 Mar 12, 2024, 5:31 AM Page 10 (10)