1138965

1138965 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

https://www.phoenixcontact.com/us/products/1138965 09/27/2021 Page 1 / 7 AC charging controller - CHARX SEC-3150 - 1138965 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) CHARX control modular, AC charging controller according to IEC 61851-1, ISO/IEC 15118. Embedded Linux system. operating mode Stand-alone, server, or client. interface: Ethernet (2x), Cellular communication (4G/2G), CHARX control modular system bus, MICRO-USB type C. communication protocol: OCPP 1.6J, Modbus/TCP, MQTT. Connectable peripheral devices: Energy meter, RFID, DC residual current detection. DIN rail mounting Key Commercial Data Packing unit 1 GTIN GTIN 4063151080389 Custom tariff number 85371091 Technical data Product definition Type Embedded Linux system Standards/regulations IEC 61851-1 ISO 15118 Charging standard IEC 61851-1 ISO/IEC 15118 Charging mode Mode 3, Case B + C Conformance CE-compliant Dimensions Height 121 mm Width 37.6 mm Depth 85.00 mm Ambient conditions

https://www.phoenixcontact.com/us/products/1138965 09/27/2021 Page 2 / 7 AC charging controller - CHARX SEC-3150 - 1138965 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above mean sea level) Air pressure (storage/transport) 58 kPa ... 106 kPa (up to 4500 m above mean sea level) Degree of protection IP20 Degree of pollution 2 in acc. with IEC 60664-1 Overvoltage category III Shock (operation) Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Test specification 15g, 11 ms period, half-sine shock pulse Vibration (operation) Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 Test specification 5g, 10...150 Hz, 2.5 h, in XYZ direction Device supply Supply voltage 12 V DC Max. current consumption 2 A (Stand-alone operation) No-load current < 200 mA (without external loads) System data Operating system Linux Processor Arm Cortex -A7 Single-Core Processor RAM 512 Mbyte (RAM) Mass storage 8 GByte (eMMC) User interface Web-based management Security functions IP, port, protocol Data interfaces Interface Ethernet Number 2 Connection method RJ45 jack Number of MAC addresses 2 Transmission speed 10/100 Mbps Transmission length 100 m Operating mode WAN/LAN LAN/LAN Protocols supported OCPP 1.6J Modbus/TCP

https://www.phoenixcontact.com/us/products/1138965 09/27/2021 Page 3 / 7 AC charging controller - CHARX SEC-3150 - 1138965 Technical data Data interfaces MQTT HTTP HTTPS Interface Configuration and diagnostics Number 1 Connection method Micro-USB type C Protocols supported RNDIS Interface Energy meters Bus system RS-485 energy meter) Interface RFID readers Bus system RS-485 RFID reader) Interface CHARX control modular system bus Number 1 Connection method DIN rail bus connectors Wireless interfaces Interface Cellular communication Interface description GSM / GPRS / EDGE / LTE (FDD) Frequency 800 MHz (LTE B20)

900 MHz (LTE B8)

1800 MHz (LTE B3)

900 MHz (GSM/GPRS/EDGE )

1800 MHz (GSM/GPRS/EDGE )

Antenna 50 Ω impedance SMA antenna socket Note You will find a suitable antenna in the accessories are for this item SIM card Micro SIM (3FF) LTE CAT1 Country support Europe Protocols supported OCPP 1.6J Function interfaces Interface Vehicle interface Communication protocol IEC 61851-1 ISO 15118 GB/T 18487

https://www.phoenixcontact.com/us/products/1138965 09/27/2021 Page 4 / 7 AC charging controller - CHARX SEC-3150 - 1138965 Technical data Function interfaces Proximity IEC 61851-1 GB/T 18487 Charging cases Mode 3, Case B + C Control voltage ± 12 V (Locking actuator) Rated current 2 A Locking release in the event of mains failure Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet Interface Residual current detection Sensor supply voltage 12 V DC Error state signal level 12 V (Different terminal points)

0 V (Different terminal points)

Test & Reset signal level 12 V Interface Temperature monitoring Sensor type Pt 1000 PTC chain Tripping characteristic configurable Interface Contactor control Interface description Floating switch contact Switching voltage max. 250 V AC (Necessary for ISO 15118 communication) max. 30 V DC Rated current 2 A Interrupting rating max. 1500 VA Inputs Description of the input Digital input Number inputs 4 Nominal input voltage UN 12 V Input voltage range 0 V ... 3 V (Off) 9 V ... 15 V (On) Function configurable Outputs Output name Digital output Number outputs 4 Operating mode High-Side (Output switched to internal 12 V voltage) Low-Side (Output switched to GND potential) Output voltage 12 V (High-side operation) ≤ 12 V (Low-side operation) Output current max. 600 mA

https://www.phoenixcontact.com/us/products/1138965 09/27/2021 Page 5 / 7 AC charging controller - CHARX SEC-3150 - 1138965 Technical data Outputs Function configurable Connection data Connection technology pluggable Push-in technology Conductor cross section AWG 24 ... 16 Stripping length 8 mm 10 mm (for contactor control) Classifications eCl@ss eCl@ss 11.0 27144703 eCl@ss 9.0 27144703 ETIM ETIM 7.0 EC002889 Accessories Accessories Antenna Antenna - PSI-GSM/UMTS-QB-ANT - 2313371 GSM UMTS antenna, with omnidirectional characteristic, 2 m antenna cable with SMA round connector Residual current monitoring module

https://www.phoenixcontact.com/us/products/1138965 09/27/2021 Page 6 / 7 AC charging controller - CHARX SEC-3150 - 1138965 Accessories Differential current monitoring - EV-RCM-6DC-WAT - 1309697 The residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents. Differential current monitoring - EV-RCM-6DC-WAT-X10 - 1309695 The residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents. RFID device RFID device - EV-RFID-ELT-PCB - 1309772 RFID card reader for connection to CHARX control modular charging controllers RFID device - EV-RFID-ELT-PCB-X10 - 1309752 RFID card reader for connection to CHARX control modular charging controllers RFID device - EV-RFID-ELT-IP65 - 1309687 RFID card reader for connection to CHARX control modular charging controllers

https://www.phoenixcontact.com/us/products/1138965 09/27/2021 Page 7 / 7 Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com