1125984 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 14
Technical content
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. PLC-INTERFACE for protection against interference currents/voltages on the control side. Consisting of PLC-BSC-230UC/ 1/SEN/SO46 basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact, 1 N/O contact, 230 V AC input voltage Commercial data Item number 1125984 Packing unit 10 pc Minimum order quantity 1 pc Product key DK622M GTIN 4063151052980 Weight per piece (including packing) 36.48 g Weight per piece (excluding packing) 30.04 g Country of origin DE PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 1 (14)
Notes on operation The PLC-ATP partition plate must be installed for voltages greater than 250 V (L1, L2, L3) between identical terminal blocks on adjacent modules. Notes on operation The PLC-ATP separating plate should be installed for safe isolation between adjacent modules Assembly note The PLC-ATP separating plate is required at the start and end of every PLC terminal strip. Notes on operation The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built- in device without protection against direct contact. Notes on operation If the specified maximum values for multi-layer contact relays are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact. Product properties Product type Relay Module Product family PLC-INTERFACE Application Input function Operating mode 100% operating factor Mechanical service life 2x 107 cycles Insulation characteristics: Air clearances and creepage distances Insulation Safe isolation, reinforced insulation Overvoltage category III Pollution degree 3 Data management status Date of last data management 12.03.2025 Electrical properties Maximum power dissipation for nominal condition 2.3 W Test voltage (Winding/contact) 4 kVrms (50 Hz, 1 min., winding/contact) Air clearances and creepage distances Rated insulation voltage 250 V AC Rated surge voltage 6 kV Input data Coil side
230 V ACNominal input voltage UN
220 V DC
171.6 V DC ... 253 V DC (20 °C) PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 2 (14)
Nominal voltage (plugged-in electromechanical relay) 60 V DC Mains frequency 50/60 Hz Drive and function monostable Drive (polarity) polarized 8.8 mA (50 Hz)Typical input current at UN 10 mA (60 Hz) Typical response time 7 ms Typical release time 20 ms Typical release voltage 80 V AC Bridge rectifierProtective circuit RC element Status display LED (yellow) Output data Switching Contact switching type 1 N/O contact Type of switch contact Single contact Contact material AgSnO, hard gold-plated
30 V ACMaximum switching voltage
36 V DC
Minimum switching voltage 100 mV (at 10 mA) Limiting continuous current 50 mA Maximum inrush current 50 mA Min. switching current 1 mA (24 V) Short-circuit current 200 A (conditional short-circuit current) Interrupting rating (ohmic load) max. 1.2 W (24 V DC) Switching capacity min. 0.12 W Output fuse 4 A gL/gG NEOZED Connection data Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section flexible Conductor cross section AWG 26 ... 14 supported during conductor connection (held by one hand, supported on the housing)) Dimensions Width 6.2 mm PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 3 (14)
Color gray (RAL 7042) Environmental and real-life conditions Ambient conditions Degree of protection (Relay base) IP20 (Relay base) Degree of protection (Relay) RT III (Relay) Degree of protection (Installation location) ≥ IP54 (Installation location) Ambient temperature (operation) -40 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude ≤ 2000 m Approvals CE Certificate CE-compliant UKCA Certificate UKCA-compliant Shipbuilding approval Certificate TAE0000196 Corrosive gas test ISA-S71.04. G3 Harsh GroupIdentification EN 60068-2-60 Shipbuilding data Temperature D Humidity A Vibration B/C EMC B Enclosure Required protection according to the Rules shall be provided upon installation on board EMC data Electromagnetic compatibility Conformance with EMC directive Low Voltage Directive Conformance with Low Voltage Directive Standards and regulations Air clearances and creepage distances EN 61810Standards/regulations IEC 60947-5-1 PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 4 (14)
Mounting type DIN rail mounting Assembly note in rows with zero spacing Mounting position any PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 5 (14)
V R C N L U Output Leakage current Load Signal cable Occurrence of interference signals Scenario 1: controller - AC output card Application drawing N U L
230 VAC
( 10m)> Parallel signal cables or load cables Long signal cable Leakage current LoadE.g. Occurrence of interference signals Scenario 2: long signal cables PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 6 (14)
A B 20 25 30 35 40 45 50 55 60 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 [°C] U/UN Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 7 (14)
PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 8 (14)
Switching current [A]
250 V AC, ohmic load
PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 9 (14)
COS □ Reduction factor 1 0,9 0,3 0,4 0,5 0,6 0,7 0,8 0,9 Service life reduction factor PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 10 (14)
-40 -20 0 20 40 60 80 100 HR [%] [°C] A B Permissible humidity for operation and storage. The maximum permissible ambient temperature as specified in the data sheet must be observed. Area A: Ice buildup at ambient temperatures ≤ 0°C must be prevented Area B: Condensation at ambient temperatures > 0°C must be prevented On 30 full days that are naturally distributed across an entire year, a humidity level of 95% is permissible at an ambient temperature ≤ 25°C. PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 11 (14)
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1125984 EAC Approval ID: RU*C-DE.*08.B.00010 DNV GL Approval ID: TAE0000196 EAC Approval ID: RU D-DE.B*00573/18 cULus Listed Approval ID: E140324 PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 12 (14)
ECLASS-11.0 27371601 ECLASS-12.0 27371601 ECLASS-13.0 27371601 ETIM ETIM 9.0 EC001437 UNSPSC UNSPSC 21.0 39122300 PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 13 (14)
Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 7(a), 7(c)-I China RoHS EFUP-50Environment friendly use period (EFUP) An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP c9206f5e-adf0-4f95-a2c3-da794e713b8a Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com PLC-RSC-230UC/ 1AU/SEN/SO46 - Relay module 1125984 https://www.phoenixcontact.com/us/products/1125984 Mar 17, 2025, 1:17 AM Page 14 (14)