1110043

1110043 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 17

Technical content

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 40 A Your advantages Save energy, thanks to a high degree of efficiency• Outdoor installation possible, with a wide temperature range of -25°C … +70°C Simple output voltage monitoring, thanks to the floating DC OK relay contact Commercial Data Item number 1110043 Packing unit 1 pc Minimum order quantity 1 pc Product Key CMPV13 GTIN 4063151024420 Weight per Piece (including packing) 2,570 g Weight per Piece (excluding packing) 2,570 g Country of origin TH Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 1 (17)

Supply system configuration Star network (TN, TT, IT (PE)) Nominal input voltage range 100 V AC ... 240 V AC 110 V AC ... 240 V AC ±10 % (UL) Derating < 99 V AC (1 %/V)

120 V ACTypical national grid voltage

230 V AC

Voltage type of supply voltage AC Inrush current typ. 15 A (at 25 °C) Inrush current integral (I2t) < 0.5 A2s Frequency range (fN) 50 Hz ... 60 Hz ±10 % typ. 17 ms (120 V AC)Mains buffering time typ. 23 ms (230 V AC)

10.5 A (100 V AC)

9 A (120 V AC)

4.7 A (230 V AC)

4.5 A (240 V AC)

9.5 A (110 V AC (UL))

4.5 A (240 V AC (UL))

Protective circuit Transient protection; Varistor, gas-filled surge arrester Switch-on time typ. 1 s Device mains fuse 20 A internal (device protection), slow-blow Recommended breaker for input protection 10 A ... 16 A (Characteristic B, C, D, K or comparable) Discharge current to PE < 3.5 mA Output data typ. 93.6 % (120 V AC)Efficiency typ. 94.8 % (230 V AC) Nominal output voltage 24 V DC Setting range of the output voltage (USet) 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted) Nominal output current (IN) 40 A Short-circuit-proof yes No-load proof yes Derating 55 °C ... 70 °C typ. 1,6 (120 V AC)Crest factor typ. 1,6 (230 V AC) Output power (PN) 960 W Connection in parallel yes, for redundancy Connection in series yes, for increased output voltage Feedback voltage resistance ≤ 35 V DC Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 2 (17)

Protection against overvoltage at the output (OVP) ≤ 35 V DC Residual ripple typ. 150 mVPP (with nominal values) < 1 % (change in load, static 10 % ... 90 %) < 3 % (change in load, dynamic 10 % ... 90 %) Control deviation < 0.1 % (change in input voltage ±10 %) Rise time < 1 s (UOut = 10 % ... 90 %) Minimum no-load power dissipation < 5 W (120 V AC) Maximum no-load power dissipation < 4 W (230 V AC) Minimum nominal load power dissipation < 67 W (120 V AC) Power loss nominal load max. < 53 W (230 V AC) Signal relay 13/14 Connection level 3.x Connection labeling 3.1 (13), 3.2 (14) Switch contact (floating) OptoMOS max. 30 V AC/DCSwitching voltage max. 60 V DC Current carrying capacity max. 50 mA DC OK (UOut > 0,9 x UN) (Contact closed)State condition UOUT < 0,9 x UN (Contact open) Connection data Input Position 1.x Identification 1.1 (), 1.2 (L), 1.3 (N) Conductor connection Connection method Screw connection rigid 0.2 mm² ... 6 mm² flexible 0.2 mm² ... 4 mm² flexible with ferrule without plastic sleeve 0.25 mm² ... 4 mm² flexible with ferrule with plastic sleeve 0.25 mm² ... 4 mm² rigid (AWG) 24 ... 10 (Cu) Stripping length 8 mm Drive form screw head Slotted L Output Position 2.x Identification 2.1, 2.2 (+), 2.3, 2.4 (-) Conductor connection Connection method Screw connection rigid 0.5 mm² ... 16 mm² Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 3 (17)

flexible 0.5 mm² ... 16 mm² flexible with ferrule without plastic sleeve 0.5 mm² ... 16 mm² flexible with ferrule with plastic sleeve 0.5 mm² ... 16 mm² rigid (AWG) 20 ... 6 (Cu) Stripping length 10 mm Drive form screw head Slotted L Signal Position 3.x Identification 3.1 (13), 3.2 (14) Conductor connection Connection method Screw connection rigid 0.5 mm² ... 16 mm² flexible 0.5 mm² ... 16 mm² flexible with ferrule without plastic sleeve 0.5 mm² ... 16 mm² flexible with ferrule with plastic sleeve 0.5 mm² ... 16 mm² rigid (AWG) 20 ... 6 (Cu) Stripping length 10 mm Drive form screw head Slotted L LED signaling Types of signaling LED DC OK – signal state operation (UN = 24 V DC, IOut = IN) Electrical properties Number of phases 1.00 4 kV AC (type test)Insulation voltage input/output 3 kV AC (routine test) 3.5 kV AC (type test)Insulation voltage input / PE 2.4 kV AC (routine test) Product properties Product type Power supply > 900000 h (25 °C) > 530000 h (40 °C) MTBF (IEC 61709, SN 29500) > 280000 h (55 °C) RoHS Directive 2011/65/EU WEEE Environmental protection directive Reach Insulation characteristics Protection class I Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 4 (17)

Depth Device depth (DIN rail mounting) 125 mm (Device depth (DIN rail mounting)) Installation dimensions Installation distance right/left (active, passive) 15 mm / 15 mm (POut ≥50% ) Installation distance top/bottom (active, passive) 30 mm / 30 mm (POut ≥50% ) Mounting Mounting type DIN rail mounting Assembly instructions alignable: 0 mm horizontally, 30 mm vertically Mounting position horizontal DIN rail NS 35, EN 60715 With protective coating No Material specifications Flammability rating according to UL 94 V0 (Housing, terminal blocks) Housing material Metal Hood version Stainless steel Side element version Aluminum Foot latch material Sheet steel, zinc-plated Housing material Aluminum (AlMg3) / sheet steel, zinc-plated Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Ambient temperature (start-up type tested) -40 °C Maximum altitude ≤ 3000 m (> 2000 m, Derating: 10 %/1000 m) Climatic class 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Shock (operation) 18 ms, 30g, per spatial direction (IEC 60068-2-27) < 13.2 Hz, amplitude ±1.0 mm (according to IEC 60068-2-6)Vibration (operation) 5 Hz ... 100 Hz, 0.7g (EN 60068-2-6) Standards and regulations Overvoltage category EN 61010-1 II (≤ 3000 m) Overvoltage category EN 62477-1 III (≤3000 m) Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 5 (17)

Safety of power supply units up to 1100 V (insulation distances) Standards/specifications DIN EN 61558-2-16 Electrical safety Standards/specifications IEC 61010-2-201 (SELV) Electronic equipment for use in power installations Standards/specifications EN 50178/VDE 0160 (PELV) Safety for measurement, control, and laboratory equipment Standards/specifications IEC 61010-1 Protective extra-low voltage IEC 61010-1 (SELV)Standards/specifications IEC 61010-2-201 (PELV) Safe isolation IEC 61558-2-16Standards/specifications IEC 61010-2-201 Limitation of harmonic line currents Standards/specifications EN 61000-3-2 Mains voltage dips Standards/specifications SEMI F47 - 0706 (185 V AC) EMC data EMC requirements for noise immunity EN 61000-6-2 Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 6 (17)

2.2 2.1 + 2.4 PE 1.1 Input 1.2 1.3 Signaling 3.1 13 3.2 14 A B D N L 2.3 C Test sections, insulation voltage Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 7 (17)

L 1.2 1.3 1.1 2.1 2.2 2.3 2.4 3.1 3.2 N Input AC Output DC User Interface Signal Functions UOUT DC OK Filter aktive PFC Filter SCPOCPOTPOVPUVP Block diagram Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 8 (17)

 cULus Listed Approval ID: FILE E 123528  cULus Listed Approval ID: FILE E 199827 Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 9 (17)

ECLASS-11.0 27040701 ETIM ETIM 8.0 EC002540 UNSPSC UNSPSC 21.0 39121000 Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 10 (17)

Environmental Product Compliance REACh SVHC Lead 7439-92-1 Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 11 (17)

Redundancy module - QUINT4-S-ORING/12-24DC/1X40 - 2907752 https://www.phoenixcontact.com/us/products/2907752 Active QUINT single redundancy module for DIN rail mounting, input: 12 V DC ... 24 V DC, output: 12 V DC ... 24 V DC / 1 x 40 A, incl. mounted UTA 107/30 universal DIN rail adapter Redundancy module Redundancy module - QUINT-ORING/24DC/2X40/1X80 - 2902879 https://www.phoenixcontact.com/us/products/2902879 Active QUINT redundancy module for DIN rail mounting with ACB (Auto Current Balancing) Technology and monitoring functions, input: 24 V DC/2x 40 A, output:

24 V DC/1 x 80 A, including mounted UTA 107/30 universal DIN rail adapter

Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 12 (17)

Redundancy module - TRIO2-DIODE/12-24DC/2X20/1X40 - 2907379 https://www.phoenixcontact.com/us/products/2907379 Redundancy module, 12 V - 24 V DC, 2 x 20 A, 1 x 40 A Type 3 surge protection device Type 3 surge protection device - PLT-SEC-T3-230-FM-UT - 2907919 https://www.phoenixcontact.com/us/products/2907919 Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 13 (17)

Type 3 surge protection device Type 3 surge protection device - PLT-SEC-T3-230-FM-PT - 2907928 https://www.phoenixcontact.com/us/products/2907928 Type 2/3 surge protection, consisting of protective plug and base element with Push-in connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC Electronic circuit breaker Electronic circuit breaker - CBMC E4 24DC/1-4A NO - 2906031 https://www.phoenixcontact.com/us/products/2906031 Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 14 (17)

Electronic circuit breaker Electronic circuit breaker - CBMC E4 24DC/1-10A NO - 2906032 https://www.phoenixcontact.com/us/products/2906032 Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. Electronic circuit breaker Electronic circuit breaker - CBMC E4 24DC/1-4A+ IOL - 2910410 https://www.phoenixcontact.com/us/products/2910410 Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 15 (17)

Electronic circuit breaker Electronic circuit breaker - CBMC E4 24DC/1-10A IOL - 2910411 https://www.phoenixcontact.com/us/products/2910411 Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. Electronic circuit breaker Electronic circuit breaker - CBM E4 24DC/0.5-10A NO-R - 2905743 https://www.phoenixcontact.com/us/products/2905743 Multi-channel, electronic circuit breaker with active current limitation for protecting four loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails. Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 16 (17)

Electronic circuit breaker Electronic circuit breaker - CBM E8 24DC/0.5-10A NO-R - 2905744 https://www.phoenixcontact.com/us/products/2905744 Multi-channel, electronic circuit breaker with active current limitation for protecting eight loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails. Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Power supply unit - UNO2-PS/1AC/24DC/960W 1110043 https://www.phoenixcontact.com/us/products/1110043 Nov 16, 2022, 6:29 AM Page 17 (17)