1108128 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, Universal, 4-position, Pin, straight, M12-Push-pull external locking, coding: A, on free cable end, Rear mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Established M12 standard for secure transmission of signals, data, and power• Easy and quick cabling of devices and systems in hard-to-reach areas Manufacturer-independent M12 push-pull locking system for maximum availability Reliable shield connection even under extreme mechanical strain Commercial data Item number 1108128 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB24 Product key ABQCCB GTIN 4063151012021 Weight per piece (including packing) 25.9 g Weight per piece (excluding packing) 23 g Customs tariff number 85444290 Country of origin DE SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 1 (12)

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Order information: Lock nut is included in the scope of delivery General Contact connection method: Crimp connection Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked. Safety note SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 2 (12)
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly note With flat nut Product properties Product type Circular connectors (device side) Application Signal Sensor type Universal Number of positions 4 No. of cable outlets 1 Shielded no Coding A Thread type M12 Data management status Article revision 06 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Material Brass, nickel-plated Flammability rating according to UL 94 V0 Seal material NBR/FKM Material of grip body Brass, nickel-plated Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Conductor material Tin-plated Cu litz wires Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 3 (12)

250 V (AC)Nominal voltage UN

250 V (DC)

Transmission medium Copper Max. conductor resistance 57.6 mΩ/m Connection data Conductor connection Connection method Individual wires Contact connection type Pin Conductor cross section 0.34 mm² Tightening torque 3 Nm ... 4 Nm (Installation-side) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Pin Head cable outlet straight Head thread type M12 Head locking type Push-pull external locking Coding A Connection 2 Head design free cable end Cable/line Cable length 0.5 m Cable type TPE litz wire Signal type/category Universal Wire diameter incl. insulation 1.2 mm ±0.07 mm Single wire, color brown, white, blue, black Cable cross section 0.34 mm² Conductor material Tin-plated Cu litz wires Conductor structure signal line 7x 0.25 mm AWG signal line 22 Material wire insulation TPE Thickness, insulation 0.21 mm (Core insulation) Nominal voltage, cable 300 V Test voltage, cable 3000 V AC SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 4 (12)

Cable resistance ≤ 57.6 mΩ/m Cable insulation resistance ≥ 20 MΩ*km -40 °C ... 85 °C (cable, fixed installation)Ambient temperature (operation) -25 °C ... 85 °C (Cable, flexible installation) Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-010 Note Push-pull SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 5 (12)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 4x0,34mm 2 1 I = current strength, T = ambient temperature SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 6 (12)

Pin assignment of M12 male connector, 4-pos., A-coded, view of connector side Circuit diagram BN1 BK4 BU3 WH SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 7 (12)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1108128  cULus Recognized Approval ID: E221474-20140616 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

250 V 4 A 22 - 20 -

SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 8 (12)

ECLASS-11.0 27440109 ECLASS-12.0 27440109 ECLASS-13.0 27440109 ETIM ETIM 9.0 EC003569 UNSPSC UNSPSC 21.0 39121400 SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 9 (12)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 10 (12)

https://www.phoenixcontact.com/us/products/1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush- type plugs and I/O devices in the field PROT-M12 FS-M - Sealing cap 1430488 https://www.phoenixcontact.com/us/products/1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 11 (12)

SACC-M16-SEAL CLM - Flat gasket 1430394 https://www.phoenixcontact.com/us/products/1430394 M16 flat gasket for M12 flush-type connectors with M16 fastening thread Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-DSI-MS-4CON-M16/0,5 PP - Device connector rear mounting 1108128 https://www.phoenixcontact.com/us/products/1108128 Aug 9, 2024, 6:47 AM Page 12 (12)