DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 100 J8 Surge voltage (V) Damp heat (Steady State) e 2.5 j Dissipation factor(tan δ) Rated temp, +85 ℃ Products : +85 ℃ 1000 h, rated voltage applied Rated voltage × 1.15 220 Leakage current d 2.0 g

120 N8 330

≦ 3 times of the initial limit 6.3 Marking Dimensions (not to scale) Dissipation factor(tan δ) Please see the attached characteristics list Dissipation factor(tan δ) ≦ 1.5 times of the initial limit Endurance +105 ℃ 1000 h rated voltage applied Capacitance change Leakage current Within the initial limit ≦ 1.5 times of the initial limit Within ±20 % of the initial value E8 150 +60 ℃, 90 % to 95 % RH, 500 h, No-applied voltage Capacitance change 470 2TPE330MAFB (MADGB), 2TPE470MAJGB (MAFB), 2TPE330MFB, ETPE330MAFB (MA9GB)) Within +40 %, −20 % of the initial value (Except for above model) Within +50 %, −20 % of the initial value (2R5TPE220MAZB (MAPB, MAFB), 2R5TPE330MAZB, A 4.0 8.0 k Conductive Polymer Tantalum Solid Capacitors Surface Mount Type TPE series B size Rated capacitance code Rated voltage code LPolarity marking (+) Lot No. S S W1 W H Some part numbers are not a recommended product. Not recommended for new design.

TPE (B size) series *1: Ripple current (100 kHz / +45 ℃) *2: ESR (100 kHz / +20 ℃) *3: tan δ (120 Hz / +20 ℃) *4: After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" . ◆ Small order quantity (500 pcs/reel) is available with TPE series. Please contact our sales representative if you prefer it. Not recommended for new design 3 3 3 3 3 3 3 3 2300 2000 1800 2000 2000 2000 2300 0.10 0.08 0.08 0.08 0.08 3200 1400 3200 2700 0.08 0.08 0.08 470 330 950 950 1300 1200 1400 1600 950 1350 1400 1400 1400 1400 0.08 0.08 1400 2700 2450 40 0.08 25 0.08 35 0.08 0.08 0.08 0.08 1400 35 1150 45 0.10 0.10 0.08 0.08 9/300kHz 9/300kHz 0.08 0.08 0.08 40.0 110.0 110.0 55.0 55.0 55.0 55.0 55.0 82.5 165.0 165.0 165.0 40.0 165.0 165.0 0.08 0.08 0.08 0.08 0.08 80.0 47.0 6TPE100MWB 6TPE100MVB 6TPE120MAZB 6TPE150MAPB 6TPE220MBB 6TPE220MZB 8TPE100MAZB 10TPE47MAZB 63.0 63.0 75.6 94.5 ETPE330MAFB ETPE330MFB ETPE330MIB 0.08 0.08 2000 2000 2000 2000 2000 2000 2000 2000 138.6 138.6 63.0 4TPE100MZB 4TPE100MBB 6TPE100MBB 60.0 88.0 88.0 88.0 88.0 63.0 6TPE100MPB 2000 63.0 6TPE100MAZB 2000 2000 2000 2R5TPE220MFGB 2R5TPE220MLB 2R5TPE220MAPB 2R5TPE220MZB 2R5TPE220MAZB 2R5TPE220MUB 2R5TPE330MAZB ETPE330MA9GB ETPE330M9GB 4TPE100MWB 2000 4TPE150MAZB 2000 4TPE220MAZB 2000 4TPE220MZB 2000 4TPE220MVB 2000 4TPE220MBB 2000 1.9 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2TPE330MAFB 2TPE330MADGB 2TPE470MAFB 2TPE470MAJGB 2R5TPE220MAFB 330 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 330 330 100 1.92.8 2.8 1.9 3.5 2.8 2.8 3.5 2.8 1.9 4.0 1.9105 105 105 2.5 3.5 2.8 1.9 3.5 2.8 3.5 2.8 1.9 6.3 6.3 6.3 8.0 105 105 105 105 105 105 105 4.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 6.3 105 105 2.5 2.8 2.83.5 105 2.0 1.8 1.8 1.8 1.8 2.0 2.5 2.5 2.0 2.5 2.0 2.5 2.0 2.0 2.5 2.0 105 105 105 105 1.9 1.9 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 1.9 1.9 1.9 1.9 3.5 2.8 3.5 2.8 15/300kHz 253.5 2.8 1700 1600 1.9 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 1.9 1.9 1.9 1.9 3.5 2.8 3.5 2.8 3.5 2.8 3.5 1.9 1.9 1.9 Part numberLC*4 (μA) Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Apr-22 105 105 105 6.3 5.0 5.0 105 10 3.5 2.8 1400 8.0 3.5 2.8 3.5 2.8 3.5 2.8 1.9 188.0 188.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Cate- gory voltage (V) Rated temper- ature (℃) Rated voltage (V) Rated capaci- tance (μF) Case size 2TPE330MFB0.08 0.08 0.10 105 105 1052.0 3.5 2.8 0.10 0.08 H 1.9 1.9 W Specifications Standard Reflow temp ≦250℃ Reflow temp ≦260℃ Floor life level（ｍｍ） L Cate- gory temper- ature (℃) tan δ*3ESR*2 (mΩ max.) Ripple*1 current (mA rms) Size code 13/300kHz 11/300kHz Min. packaging q'ty (pcs) 3.5 2.8 132.0 132.0 132.0 2.5 220 4.0 100 105 4.0 105 3.5 85 3.2 105 220 3.5 105 4.0 105 3.5 3.5 2.8 1.9 1300 40.0 85 3.2 105 150 3.5 2.8 1.9 1400 35 6.3 105 6.3 105 100 3.5 2.8 1.9 1600 105 6.3 105 3.5 2.8 1.9 1400 85 5.0 105 220 3.5 2.8 1.9 1400 63.0 6TPE100MZB 2000 120 150 Characteristics list 35 0.10 138.6 6TPE220MAZB 2000 85 5.0 105 2000 6.3 6.3 105 105 105 1600 25 0.10 6TPE150MAZB 2000 3.5 2.8 3.5 2.8 138.6 6TPE220MAPB 2000 NRFND NRFND NRFND NRFND NRFND

  • Low profile (Height 1.5 mm max.)
  • Low ESR (7 mΩ max.)
  • Large capacitance (1500 μF max.)
  • RoHS compliance, Halogen free Unit：ｍｍ R. voltage code Unit：V * Externals of figure are the reference. g 4.0 A 10 e 2.5 6.3j 7.3 7.3 4.3 W1±0.1L±0.3 1.8±0.1 Marking Dimensions (not to scale) Within +40 %, −20 % of the initial value (Except for above model) Damp heat (Steady State) +60 ℃, 90 % to 95 % RH, 500 h, No-applied voltage Within +50 %, −20 % of the initial value W±0.2 S±0.2 1.1 Size code H 1.4±0.1 2.4 D2E D15E 28-Apr-22Should a safety concern arise regarding this product, please be sure to contact us immediately. 4.3 1.3 2.4 7.3 4.3 1.3 2.4 7.3 1.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. 3.8±0.2 2.4 2.8±0.2D3L 4.3 D3L D4 6.3 V 2.5 V to 10 V 5.0 V 2.5 V to 10 V 2R5TPE470M (I, F, C, 9, 7), 2R5TPE1000MF, 2R5TPE1500M (F, C)) ≦ 1.5 times of the initial limit ≦ 3 times of the initial limit Dissipation factor(tan δ) Leakage current 150 μF to 680 μF 330 μF to 1500 μF Rated temp, +85 ℃ Products : +85 ℃ 1000 h, rated voltage applied 470 μF 68 μF to 470 μF Please see the attached characteristics list Please see the attached characteristics list Capacitance change Surge voltage (V) Rated voltage × 1.15 (6TPE330MAP, 6TPE470MAZU : +85 ℃ 2000 h, rated voltage applied) –55 ℃ to +105 ℃ Specifications

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type TPE series D size Size code Rated volt. range Category temp. range Category volt. range D15E D2E Capacitance tolerance Rated cap. range Dissipation factor(tan δ) Leakage current (2R5TPE220M (I, F, 9), 2R5TPE330M (I, F, C, 9, 7), Endurance Dissipation factor(tan δ) Leakage current +105 ℃ 2000 h rated voltage applied ≦ 1.5 times of the initial limit Within the initial limit Capacitance change Within ±20 % of the initial value Rated capacitance (μF) Rated voltage code L Polarity marking (+) Lot No. S S W1 W H Some part numbers are not a recommended product. Not recommended for new design.

TPE (D size) series *1: Ripple current (100 kHz / +45 ℃) *2: ESR (100 kHz / +20 ℃) *3: tan δ (120 Hz / +20 ℃) *4: After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" . ◆ Small order quantity (500 pcs/reel) is available with TPE series. Please contact our sales representative if you prefer it. Not recommended for new design 3 2a D3L D3L D2E 6TPE330MIL 6TPE150M 6TPE220MI 6TPE220M 6TPE220MAP 6TPE220MW 6TPE100MI 6TPE100M 6TPE100MW 6TPE150MF 6TPE150MI 4TPE470MCL 4TPE470MFL 4TPE470MIL 4TPE470ML 220 –D4 D3L D2E 150 7.3 7.3 7.3 7.3 10TPE68MW 10TPE150MPL 10TPE220MIL 10TPE220ML 10TPE330M 6TPE220MIL 6TPE330MAP 6TPE330MAL 6TPE680M 10TPE68M 6TPE330MFL 6TPE330ML 6TPE330MA9EL 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4TPE470MWL 4TPE220M 4TPE220MV 4TPE330MI 4TPE330M 4TPE330MW 2R5TPE1500MC 2R5TPE1500MF 4TPE150MI 4TPE220MF 4TPE220MI 2R5TPE470MI 2R5TPE680MCL 2R5TPE680MFL 2R5TPE680MWL 2R5TPE1000MF 2500 2000 2R5TPE220M9 2R5TPE220MF 2R5TPE220MI 2R5TPE220M 2R5TPE330M7 2R5TPE330M9 2R5TPE330MC 2R5TPE330MF 2R5TPE330MI 2R5TPE330M 2R5TPE470M7 2R5TPE470M9 2R5TPE470MC 2R5TPE470MF 2000 3000 3000 2500 2500 3000 3000 2500 3000 2500 3000 3000 3000 3000 3000 2500 2500 2500 2500 2500 2500 3000 3000 3000 3000 3000 2500 2500 2500 3000 3000 3000 3000 3000 2500 2000 2000 2000 3000 3000 3000 3000 2500 2500 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 6.3 5.0 5.0 6.3 6.3 6.3 6.3 5.0 6.3 6.3 6.3 6.3 6.3 6.3 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 2.5 2.5 4.0 4.0 4.0 2.5 2.5 2.5 2.5 2.5 105 105 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 330 105 105 105 105 105 105 105 105 105 105 105 105 470 330 220 105 105 105 105 105 105 105 105 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 2.8 2.8 2.8 3.8 1.8 1.8 1.8 2.8 3.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 3.8 3.8 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.8 2.8 3.8 1.8 1.8 1.8 1.8 1.8 1.8 2.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 2.8 2.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1850 2400 2800 2400 2800 2400 1850 3100 2800 3500 3100 2800 2400 1850 2400 1750 2800 2400 1850 3000 2800 2400 2400 3000 2400 2400 2800 2400 2400 1850 4400 3900 2800 3100 2800 2800 3500 3100 1850 3900 3900 3100 2800 2400 4400 3900 3500 3100 2800 2400 4400 3900 3500 3100 0.10 0.10 0.10 0.10 0.15 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.10 0.10 0.10 0.10 0.10 220.0 330.0 138.6 207.9 207.9 428.4 68.0 0.10 0.10 0.10 0.10 0.10 0.15 0.10 0.10 0.10 0.10 0.10 0.15 0.10 0.10 0.10 0.10 0.10 94.5 138.6 138.6 138.6 138.6 63.0 63.0 63.0 94.5 94.5 170.0 170.0 250.0 188.0 188.0 188.0 188.0 188.0 88.0 88.0 132.0 132.0 132.0 Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Apr-22 Reflow temp ≦260℃ Reflow temp ≦250℃ Ripple*1 current (mA rms) ESR*2 (mΩ max.) tan δ*3 LC*4 (μA) Part number Min. packaging q'ty (pcs) Rated capaci- tance (μF) 55.0 55.0 55.0 55.0 82.5 117.5 Rated voltage (V) Rated temper- ature (℃) Cate- gory voltage (V) Cate- gory temper- ature (℃) Case size Size code Specifications Floor life （ｍｍ） level L W H Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Standard 117.5 117.5 117.5 82.5 82.5 82.5 82.5 82.5 375.0 375.0 60.0 88.0 88.0 117.5 170.0 2.5

680 D3L

D41500 – 4.0 150 D2E 220 330

470 D3L

6.3 100 D2E150 220 6.3 105 105 105 330 330 330 207.9 2.8 3100 15 0.10 207.9 207.9 207.94.3 105 0.10 207.9 6TPE330MAA 2000 85 5.0 105 7.3 4.3 3.8 D4 4400 10 105 85 5.0 105 470 7.3 4.3 1.4 D15E 1700 3000 105 6.3 105 7.3 4.3 3.8 2350 35 0.10 296.1 6TPE470MAZU 4000 105 6.3 105 7.3 4.3 3.8 3500 18 0.15 296.1 6TPE470MI 2000 105 6.3 105 7.3 4.3 3.8 220.0 25 0.15 296.1 6TPE470M 2000 68.0 150.00.10 0.10 4.3 4.3 Characteristics list D2E D3L 40 0.15 296.1 6TPE470MW 2000 NRFND NRFND NRFND

■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations>

Notices / Items to be observed ■ Applicable laws and regulations ・This product complies with the RoHS Directive (Restriction of the use of certain hazardous substances in electrical and electronic equipment (DIRECTIVE 2011/65/EU and（EU)2015/863)). ・ No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing this product. We do not use PBBs or PBDEs as brominated flame retardants. ・ Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method, on the occasion of export of this product. ・ These products are not dangerous goods on the transportation as identified by UN(United Nations) numbers or UN classification. ■ Limited applications ・ This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home appliances, computers and other office equipment, optical equipment, measuring equipment. ・ An advanced specification must be signed individually for high-reliability use that might threaten human life or property due to a malfunction of the capacitor. ■ Intellectual property rights and licenses ・ The technical information in this specification provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ For specification ・ This specification guarantees the quality and performance of the product as individual components. The durability differs depending on the environment and the conditions of usage. Before use, check and evaluate their compatibility with actual conditions when installed in the products. When safety requirements cannot be satisfied in your technical examination, inform us immediately. ・ Do not use the products beyond the specifications described in this document. ■ Upon application to products where safety is regarded as important Install the following systems for a fail-safe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other signification damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/ gas equipment, rotating rotating equipment, and disaster/crime prevention equipment. (1) The system is equipped with a protection circuit and protection device. (2) The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault. ■ Conditions of use ・ Before using the products, carefully check the effects on their quality and performance, and determined whether or not they can be used. These products are designed and manufactured for general-purpose and standard use in general electronic equipment. These products are not intended for use in the following special conditions. (1) In liquid, such as Water, Oil, Chemicals, or Organic solvent. (2) In direct sunlight, outdoors, or in dust. (3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a high concentration corrosive gas, such as Cl2, H2S, NH3, SO2, or NOx. (4) In an environment where strong static electricity or electromagnetic waves exist. (5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near these products. (6) Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin and other material. (7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues) (8) Using in the atmosphere where strays acid or alkaline. (9) Using in the atmosphere where there are excessive vibration and shock. (10) Using in the atmosphere where there are low pressure or decompression. ・ Please arrange circuit design for preventing impulse or transitional voltage. Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage, instantaneous high voltage, high pulse voltage etc. ・ Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid deterioration of characteristics and functions of each product. Electrolyte leakage damages printed circuit and affects performance, characteristics, and functions of customer system. Notices Items to be observed 16-Apr-21

Conductive Polymer Tantalum Solid Capacitors

1.1 Prohibited circuits

Since problems can be expected, POSCAP cannot be used on the following circuits. (1) High impedance voltage retention circuits (2) Coupling circuit (3) Time constant circuits (4) Circuits greatly affected by leakage current (5) The circuit in which two or more POSCAP are connected in a series so as to raise the endurance voltage.

1.2 Failure and life-span

The failure rate is 0.5 %* / 1000 h (Confidence level : 60 %) based on JIS C 5003. The mainly failure modes are as follows. * B2 size or less : 1.0 % 1.2-1 Contingency failure The main causes of failure are thermal stresses cause by the soldering or thermal use environment, along with heat stresses, electrical stresses or mechanical stresses. The most common failure mode is a short circuit. In case a short circuit occurs, ensure safety by fully considering the followings. (a) If POSCAP emit smoke, turn off the main power of the equipment. In this case, keep your face and hands away from the area. (b) It may take a few seconds to a few minutes before POSCAP emits smoke by the situation. Increase safety by using a protective circuit. (c) If the smoke comes into eyes, rinse immediately. If the smoke is inhaled, gargle immediately. (d) In case a large current continues to flow after a short circuit, in the worst case, the shorted-out section may ignite. For safety, install a redundant circuit or a protective circuit, etc. 1.2-2 Wear-out failure (lifetime) When lifetime exceeded the specified guarantee time of Endurance and Damp heat, electrolyte might insulate and cause electric characteristic changed. This is called an open circuit. The rated capacitance values and the electrical characteristics values such as ESR specified in the characteristics list are factory default values. Please carefully design a circuit since rated capacitance values and the electrical characteristics values may change (increase) beyond the specified values under the conditions of rated voltage/temperature and electrical/mechanical performances.

1.3 Reduction of failure stress

When POSCAP is used within the rated voltage, it shows a stable characteristic, but it may be damaged in a short circuit when an overvoltage, for instance, is applied. The time to reach the failure mode can be extended by using POSCAP with reduced environment temperature, ripple current and applied voltage. Failure rate ・ In the case of the endurance which is 105 °C 2000 h. 0.5 %/1000 h (Environment temp. : 105 °C, Rated voltage or Category voltage applied) ・ In the case of the endurance which is 105 °C 1000 h or 125 °C 1000 h. 1.0 %/1000 h (Environment temp. : 105 °C, Rated voltage or Category voltage applied) ・ In the case of the endurance which is 85 °C 1000 h. 1.0 %/1000 h (Environment temp. : 85 °C, Rated voltage applied)

1.4 Check the rated performance

After checking the operation and installation environments, design the circuit so that it falls within the rated performance range stipulated in this delivery specification.

1.5 Operating temperature and ripple current

(1) Set the operating temperature so that it falls within the range stipulated in this delivery specification. (2) Do not apply current that exceeds the allowable ripple current. Ripple current should be controlled so that surface temperature of a capacitor do not exceed the rated temperature. (For questions regarding TQC series, please contact us.) (3) The ESR values specified in the characteristics list are factory default values. ESR values may change (increase) beyond the specified values depending on the customer's use conditions. 14-Jan-22 Application Guidelines (POSCAP) 1. Circuit design

Conductive Polymer Tantalum Solid Capacitors

1.6 Leakage current

Even when the soldering conditions fall within the range of this delivery specifications, leakage current increases a little on occasion. It also increases a little during high temperature storage, high humidity storage こand temperature cycling with no voltage applied. In cases such as these, leakage current will decrease by applying voltage under the condition of below the POSCAP's maximum operating temperature. The speed at which the leakage current is restored is increased by applying voltage when the POSCAP's temperature is close to the maximum operating temperature.

1.7 Rapid charge and discharge limitation

Rapid charge and discharge are restricted (for maintainance of high-proof reliability). A protective circuit is recommended for when a rapid charge or discharge causes excessive rush current since this is main cause of short circuit and large leakage current. Use a protective circuits in case the rush current value exceeds 20 A*. Be sure to insert a protection resistor of about 1 kΩ for charge and discharge when measuring the leakage current. * When TH series use under the ambient temperature more than 105 °C : 10 A, TPU series : 10 A

2.1 Protect circuit

The failure mode of POSCAP is the short mode. When it breaks down, short electric current flows to it. POSCAP gives off heat by this short current. Do the following consideration in design fully for the safety because it has a bad influence on the part around POSCAP due to this heat. ・ A protective circuit and a protective device are set up, so as to make the system safer. ・ A diffuse circuit and so on is set up, so as to make the system safer such as that a machine may not break down as to the single trouble.

2.2 Considerations when soldering

The soldering conditions are to be within the range prescribed in this delivery specification. If the specifications are not followed, there is the possibility of degradation of electric characteristic and lifetime when soldering is conducted under conditions that are harsher that those stipulated.

2.3 Others

POSCAP’s Electrical characteristics are affected by temperature and frequency fluctuations. Design circuits after checking the amount of fluctuation. It is necessary to set an environment to prevent a trouble at the time of soldering by the degradation of solder ability or moisture's getting into the molding resin when POSCAP are stored.

  • Please make storage of POSCAP sealing up in the reel and the moisture proof bag at the time of delivery in the following environment. Also, set storage period of unopened as 18 months or shorter after shipment from factory. ・ Room temperature and room humidity (generally : 15 to 35 °C, 45 to 75% RH ) are desirable. ・ Place where POSCAP is not exposed by direct sunshine.
  • Please unseal the moisture proof bag just before mounting and use up POSCAP in the moisture proof bag. Storage conditions after opening the moisture proof bag are as follows. POSCAP is not compatible with JEDEC J-STD-020, J-STD-033 ✽ Intellectual property right We, Panasonic Group are providing the product and service that customers can use without anxiety, and are working positively on the protection of our products under intellectual property rights. Representative patents relating to POSCAP are as follows: No.8456804, No.8559166 2. Mounting 3. Storage Level 14-Jan-22 Floor life Conditions ≦ 30 ℃ / 60 %RH ≦ 30 ℃ / 60 %RH ≦ 30 ℃ / 60 %RH Time 4 weeks 168 hours 48 hours