10EHZ-21G/C03

10EHZ MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: 10EHZ http://www.m-system.co.jp/ 10EHZ SPECIFICATIONS ES-0844 Rev.2 Page 1/3 High-density Signal Conditioners 10-RACK FREQUENCY TRANSDUCER Functions & Features

• Providing a DC output signal in proportion to deviation (±5 Hz) from center frequency (50 Hz or 60 Hz)
• DC output containing little ripple is ideal for computer input
• Isolation up to 2000 V AC (input) Typical Applications
• Centralized monitoring and control of power management system in manufacturing facility or building
• Measuring frequency for UPS MODEL: 10EHZ–[1][2][3]–R[4]

ORDERING INFORMATION

• Code number: 10EHZ-[1][2][3]-R[4] Specify a code from below for each [1] through [4]. (e.g. 10EHZ-11A-R/Q)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q (e.g. /C01) [1] FREQUENCY 1: 45 – 55 Hz 2: 55 – 65 Hz 3: 45 – 65 Hz [2] INPUT 1: 110 V AC 2: 220 V AC [3] OUTPUT Current A: 4 – 20 mA DC (Load resistance 600 Ω max.) D: 0 – 20 mA DC (Load resistance 600 Ω max.) E: 0 – 16 mA DC (Load resistance 750 Ω max.) F: 0 – 10 mA DC (Load resistance 1200 Ω max.) G: 0 – 1 mA DC (Load resistance 12 kΩ max.) J: 0 – 5 mA DC (Load resistance 2400 Ω max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output: Card-edge connector and M3.5 screw terminals (torque 0.8 N·m) Power input: Supplied from card-edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS Input burden: 1 VA max. Operational range: 85 – 120 % of rating Overload capacity: 150 % of rating for 10 sec., 120 % continuous

MODEL: 10EHZ http://www.m-system.co.jp/ 10EHZ SPECIFICATIONS ES-0844 Rev.2 Page 2/3 OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 12 V maximum ■ DC Voltage: 0 – 12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V OUT 20mA 55 65 Hz45 OUT 10V 55 65 Hz45 ■ OPERATION DIAGRAM (example) Remark: When there is no input voltage, the transducer outputs as negative (–) overrange. INSTALLATION Current consumption: Approx. 80 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 10BXx Weight: 400 g (0.88 lb) PERFORMANCE in percentage of span Accuracy: ±1.0 % Temp. coefficient: ±0.1 %/°C (±0.06 %/°F) Response time: ≤ 1 sec. (0 – 90 %) Ripple: 0.5 %p-p max. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @ 1 minute (input to output or power to ground)

500 V AC @ 1 minute (output to power)

V U v uFUSE VT OUTPUT OUTPUT POWER CONNECTOR

MODEL: 10EHZ http://www.m-system.co.jp/ 10EHZ SPECIFICATIONS ES-0844 Rev.2 Page 3/3 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) Terminals 8 through 11 are deleted. 130 (5.12) 3 (.12) 51 (2.01) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 15–M3.5 SCREW 8 (.31) 91 (3.58) 99 (3.90 ) 26 (1.02) 1 2 3 4 5 6 7 12 13 14 15 8 9 10 11 50 (1.97) Specifications are subject to change without notice.