10DPW GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 10DPW_1.5 – Rev. 2017-1.1 Specifications subject to change without notice. 10DPW_1.5 Series 10W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter DC-DC Converter 10 Watt The 10DPW_1.5 Series are isolated 10W DC/DC converters. Designed with high efficiency, they allow the operating temperature range of these units to be -40°C to +85°C with industry-standard footprint. Further features include wide 2:1 input voltage range, remote on/off control, short-circuit protection and over voltage protection. These converters are well suitable for battery operated equipment, mea - surement equipment, telecom, wireless network and industry control systems. Everywhere where isolated, tightly regulated voltages and com - pact size are required. Model selection: WCTV_xxyyN## W= Watt; C= Case; T= Type; V= Voltage Variation (omitted ± 10%); xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC) Example: 10DPW_2415S1.5 10= 10Watt; D= DIP; P= series; W= wide input (2:1) 18-36Vin; 15Vout; S= single output; 1.5= 1500VDC Common specifications Short circuit protection: Hiccup, automatic recovery Cooling: Free air convection Operation temperature range: -40°C~+100°C, with derating Storage temperature range: -55°C~+125°C Maximum case temperature: 95°C Switching frequency: 400kHz typ. Storage humidity range: 95% max. Radiated emissions: EN55022/Class A Conducted emissions: EN55022/Class A Case material: Five-Side Shielded Case Potting material: Epoxy (UL94V-0) MTBF (MIL-HDBK-217F @25°C): 900,000 hours Weight: 17.5g Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Input to output 1500 VDC Isolation resistance Test at 500VDC 1000 MΩ Input specifications Item Test condition Min Typ Max Units Input filter Pi Type Protection Fuse recommended Input surge voltage (100ms max.)

  • Nominal input (12V)
  • Nominal input (24V)
  • Nominal input (48V) 100 VDC Input reflected ripple current Nominal Vin and full load 50 mAp-p Start-up time Nominal Vin and constant resistive load 500 ms Remote ON/OFF • Converter: ON
  • Converter: OFF Open or 3.5V<Vr<12V Short or 0V<Vr<1.2V Sourcing current of remote control pin Nominal Vin <0.2 mA Idle input current (at Remote OFF state) Nominal Vin <2.5 mA Output specifications Item Test condition Min Typ Max Units Minimum load 10% of full load Output voltage accuracy Full load and nominal Vin ±2 % Overload protection 150 % Cross regulation Dual (25%-100% load) ±5 % Line regulation ±0.5 % Load regulation Single & Dual (F.L-25%F.L) ±0.5 % Ripple and noise 20MHz Bandwidth
  • 3-15V output
  • <15V output 100 1% of Vout mVp-p mVp-p Transient response settling time 50% load step change 350 µs Note: 1. Only typical model listed. Non-standard models will be different from the above, please contact us for more details. 2. All specifications are typical at nominal input, full load and 25°C unless otherwise stated. 3. In this datasheet, all the test methods of indications are based on corporate standards. Wide 2:1 input voltage range Input/Output Isolation Voltage: 1.5KVDC Operating Temperature Range: -40°C to +100°C Short circuit protection (SCP) Remote On/Off High efficiency 10W DIL package Meet EN55022, Class A (Radiation) Shielded Metal Case with Insulated Baseplate RoHS Compliant Customer Design Available

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 10DPW_1.5 – Rev. 2017-1.1 Specifications subject to change without notice. 10DPW_1.5 Series 10W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Typical characteristics Recommended test circuit Tolerance envelope graphTemperature derating graph Part Number Input Voltage [VDC] Range Input Current [mA] No load Full load Output Voltage [VDC] Output Current [mA] Full load Efficiency [%, Typ.] 10DPW_1203S1.5 9-18 50 1006 3.3 3000 82 10DPW_1205S1.5 9-18 50 1016 5 2000 82 10DPW_1212S1.5 9-18 30 1004 12 833 83 10DPW_1215S1.5 9-18 30 1009 15 670 83 10DPW_2403S1.5 18-36 40 503 3.3 3000 82 10DPW_2405S1.5 18-36 40 508 5 2000 82 10DPW_2412S1.5 18-36 30 502 12 833 83 10DPW_2415S1.5 18-36 30 504 15 670 83 10DPW_4803S1.5 36-75 30 251 3.3 3000 82 10DPW_4805S1.5 36-75 30 254 5 2000 82 10DPW_4812S1.5 36-75 20 251 12 833 83 10DPW_4815S1.5 36-75 20 252 15 670 83 10DPW_1205D1.5 9-18 30 1004 ±5 ±1000 83 10DPW_1212D1.5 9-18 30 1012 ±12 ±420 83 10DPW_1215D1.5 9-18 30 1024 ±15 ±340 83 10DPW_2405D1.5 18-36 30 502 ±5 ±1000 83 10DPW_2412D1.5 18-36 30 506 ±12 ±420 83 10DPW_2415D1.5 18-36 30 512 ±15 ±340 83 10DPW_4805D1.5 36-75 20 251 ±5 ±1000 83 10DPW_4812D1.5 36-75 20 253 ±12 ±420 83 10DPW_4815D1.5 36-75 20 256 ±15 ±340 83

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 10DPW_1.5 – Rev. 2017-1.1 Specifications subject to change without notice. 10DPW_1.5 Series 10W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Mechanical dimensions External filter Note: Unit: mm[inch] Tolerances: ±0.5mm [±0.02inch] Pin size tolerance: 0.6ø ±0.05mm Input filter components (C1, C2, L) are used to help meet conducted emissions (EN55022 class A) requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. PIN connection PIN 1 2, 3 9 11 14 16 22, 23 Single Remote on/off -Vin NC NC +Vout -Vout +Vin Dual Remote on/off -Vin Common -Vout +Vout Common +Vin