10DAW GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 10DAW_1.5 – Rev. 2016-1.5 Specifications subject to change without notice. 10DAW_1.5 Series 10W - Dual/Single Output - 2:1 Wide Input - Isolated & Regulated DC-DC Converter 2:1 wide input voltage range Efficiency up to 90% Output over voltage protection 1.5KVDC input/output Isolation Short circuit protection (SCP) (automatic recovery) Operating temperature: -40°C to +85°C Six-sided metal shield Industry standard pinout Low ripple & noise Meet CISPR22/EN55022 CLASS A RoHS Compliance DC-DC Converter 10 Watt The 10DAW_1.5 series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range (voltage range ≤ 2:1) 2) Where isolation is necessary between input and output (Isolation Voltage ≤ 1500VDC) 3) Where the regulation of the output voltage and the output ripple noise are demanded Model selection: WCTV_xxyyN## W= Watt; C= Case; T= Type; V= Voltage Variation (omitted ± 10%); xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC) Example: 10DAW_1205S1.5 10= 10Watt; D= DIP; A= series; W= wide input (2:1) 9-18Vin; 5Vout; S=single output; 1.5=1500VDC Common specifications Short circuit protection: Continuous, automatic recovery Temperature rise at full load: 40°C TYP Cooling: Free air convection Operation temperature range: -40°C~+85°C Storage temperature range: -55°C ~+125°C Lead temperature range: 300°C MAX, 1.5mm from case for 10 sec Vibration: 10-55Hz, 10G, 30 Min. along X, Y and Z Storage humidity range: < 95% Case material: Aluminium Alloy MTBF: >1,000,000 hours Weight: 22g Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Tested for 1 minute and leakage current less than 1 mA

1500 VDC

Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance Input/Output, 100KHz/0.1V 1000 pF Input specifications Item Test condition Min Typ Max Units Input filter Pi Hot plug unavailable Input current (full load / no load)

  • 12VDC input - 3.3V output - Others
  • 24VDC input - 3.3V output - Others
  • 48VDC input - 3.3V output - Others mA mA mA mA mA mA Reflected ripple current
  • 12VDC input
  • 24VDC input
  • 48VDC input Input impulse voltage (1sec. max.)
  • 12VDC input
  • 24VDC input
  • 48VDC input -0.7 -0.7 -0.7 100 VDC VDC VDC Start-up voltage • 12VDC input
  • 24VDC input
  • 48VDC input VDC VDC VDC Ctrl* • Models ON
  • Models OFF
  • Input current (Models OFF) Ctrl pin floating or connected to TTL high level(3.5-12VDC) Ctrl connect GND or low level (0- 1.2VDC) 1mA (TYP), 3mA (MAX) * The voltage of Ctrl pin is relative to input pin GND. Output specifications Item Test condition Min Typ Max Units Output voltage accuracy ±1 ±2 % Output voltage balance Dual output, balanced loads ±0.5 ±1.5 % Line regulation Full load, input voltage from low to high ±0.2 ±0.5 % Load regulation 5% to 100% load ±0.5 ±1.0 % Cross regulation Dual output, main output 50% load, supplement output 10% to 100% load ±5 % Transient recovery time 25% load step change 300 500 µs Transient response deviation 25% load step change ±3 ±5 % Temperature coefficient 100% load ±0.03 %/°C Ripple & Noise* 20MHz Bandwidth 40 80 mVp-p Over Voltage Protection Input voltage range 110 120 140 %Vo Switching frequency PWM mode 350 KHz * Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 10DAW_1.5 – Rev. 2016-1.5 Specifications subject to change without notice. 10DAW_1.5 Series 10W - Dual/Single Output - 2:1 Wide Input - Isolated & Regulated DC-DC Converter Part Number Input Voltage [VDC] Nominal Range Max* Output Voltage [VDC] Output Current [mA] Max Min Capacitive load** [µF; max.] Efficiency [%, Typ.] 10DAW_1203S1.5 12 9-18 20 3.3 2400 120 2200 77 10DAW_1205S1.5 12 9-18 20 5 2000 100 2200 82 10DAW_1209S1.5 12 9-18 20 9 1111 55 470 85 10DAW_1212S1.5 12 9-18 20 12 833 42 470 86 10DAW_1215S1.5 12 9-18 20 15 667 33 220 87 10DAW_1224S1.5 12 9-18 20 24 416 21 100 88 10DAW_2403S1.5 24 18-36 40 3.3 2400 120 2200 77 10DAW_2405S1.5 24 18-36 40 5 2000 100 2200 84 10DAW_2409S1.5 24 18-36 40 9 1111 55 470 86 10DAW_2412S1.5 24 18-36 40 12 833 42 680 88 10DAW_2415S1.5 24 18-36 40 15 667 33 330 90 10DAW_2424S1.5 24 18-36 40 24 416 21 100 87 10DAW_4803S1.5 48 36-72 80 3.3 2400 120 2200 78 10DAW_4805S1.5 48 36-72 80 5 2000 100 2200 82 10DAW_4812S1.5 48 36-72 80 12 833 42 820 88 10DAW_4815S1.5 48 36-72 80 15 667 33 470 89 10DAW_4824S1.5 48 36-72 80 24 416 21 220 88 10DAW_1205D1.5 12 9-18 20 ±5 ±1000 ±50 680 82 10DAW_1212D1.5 12 9-18 20 ±12 ±416 ±21 220 86 10DAW_1215D1.5 12 9-18 20 ±15 ±333 ±16 100 87 10DAW_1224D1.5 12 9-18 20 ±24 ±208 ±10 47 87 10DAW_2405D1.5 24 18-36 40 ±5 ±1000 ±50 680 83 10DAW_2412D1.5 24 18-36 40 ±12 ±416 ±21 330 86 10DAW_2415D1.5 24 18-36 40 ±15 ±333 ±16 220 88 10DAW_2424D1.5 24 18-36 40 ±24 ±208 ±10 100 87 10DAW_4805D1.5 48 36-72 80 ±5 ±1000 ±50 680 83 10DAW_4812D1.5 48 36-72 80 ±12 ±416 ±21 470 88 10DAW_4815D1.5 48 36-72 80 ±15 ±333 ±16 220 89 10DAW_4824D1.5 48 36-72 80 ±24 ±208 ±10 100 88 * Input voltage can’t exceed this value, or will cause permanent damage ** For dual output converter, the given value is the same for each output EMC specifications EMI CE CISPR22/EN55022 CLASS A（(Without External Circuit) CLASS B（(External Circuit Refer to EMC recommended circuit 2 ) EMI RE CISPR22/EN55022 CLASS A（(Without External Circuit) CLASS B（(External Circuit Refer to EMC recommended circuit 2 ) EMS ESD IEC/EN61000-4-2 Contact ±4KV perf. Criteria B EMS RS IEC/EN61000-4-3 10V/m perf. Criteria A EMS EFT IEC/EN61000-4-4 ±2KV (External Circuit Refer to EMC recommended circuit 1 ) perf. Criteria B IEC/EN61000-4-4 ±4KV (External Circuit Refer to EMC recommended circuit 1 ) perf. Criteria B EMS Surge IEC/EN61000-4-5 ±2KV (External Circuit Refer to EMC recommended circuit 1 ) perf. Criteria B EMS CS IEC/EN61000-4-6 3 Vr.m.s perf. Criteria A EMS Voltage dips, short and interruptions immunity IEC/EN61000-4-29 0%-70% perf. Criteria B

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 5 10DAW_1.5 – Rev. 2016-1.5 Specifications subject to change without notice. 10DAW_1.5 Series 10W - Dual/Single Output - 2:1 Wide Input - Isolated & Regulated DC-DC Converter Efficiency 10DAW_4805D1.5 10DAW_2405S1.5 10DAW_4805D1.5 10DAW_2405S1.5 Recommended circuit Recommended Circuit All the DC/DC converters of this series are tested according to the recom- mended circuit (see Fig. 1) before delivery. If a further decrease of the input and output ripple is required, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance, and ensure the capaci - tance should be lower than the max. capacitive load of the product. Single Output Dual Output Figure 1 Typical characteristics

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 10DAW_1.5 – Rev. 2016-1.5 Specifications subject to change without notice. 10DAW_1.5 Series 10W - Dual/Single Output - 2:1 Wide Input - Isolated & Regulated DC-DC Converter EMC solution-recommended circuit Note: In Figure 1, part 1 is for EMS test, part 2 is for EMI filtering. Choose according to requirements. Figure 1 Recommended external circuit parameters Vin: 12V Vin: 24V Vin: 48V FUSE Choose according to actual input current MOV S14K20 S20K30 S14K60 C0 680µF/25V 330µF/50V 330µF/100V C1 1µF/50V 1µF/100V C2 Refer to the Cout in recommended circuit LDM1 4.7µH CY1, CY2 1nF/2KV Mechanical dimensions Note: Unit: mm[inch] Pin diameter tolerances: ±0.10mm [±0.004inch] General tolerances: ±0.50mm [±0.020inch] Recommended footprint It is not allowed to connect modules output in parallel to enlarge the power.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 10DAW_1.5 – Rev. 2016-1.5 Specifications subject to change without notice. 10DAW_1.5 Series 10W - Dual/Single Output - 2:1 Wide Input - Isolated & Regulated DC-DC Converter Chassis mounting Pin-Out Pin 1 2 3 4 5 6 Dual Ctrl GND Vin -Vo 0V +Vo Single Ctrl GND Vin 0V NC +Vo Note: 1. Min. load shouldn‘t be less than 5%, otherwise ripple maybe increased drama- tically, If the product operates under min. load, it may not be guaranteed to meet all specifications listed. Operation under minimum load will not damage the converter. 2. Recommended Dual output models unbalanced load is ≤±5%, If the product operates >±5%, it may not be guaranteed to meet all specifications listed. 3. Max. Capacitive Load is tested at input voltage range and full load. 4. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 5. In this datasheet, all test methods are based on our corporate standards. 6. All characteristics are for listed models, and non-standard models may perform differently. Please contact our technical support for more details. 7. Specifications of this product are subject to changes without prior notice.