1086465

1086465 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

https://www.phoenixcontact.com/pi/products/1086465 01/21/2022 Page 1 / 7 High-current terminal block - UBAL 50 - 1086465 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) High-current terminal block, Terminal block for aluminum and copper conductors (AL-CU), nom. voltage: 1000 V, nominal current: 145 A, connection method: Screw connection, Rated cross section: 50 mm², cross section: 6 mm² - 50 mm², Rated cross section: 50 mm², cross section: 4 mm² - 50 mm², mounting type: NS 35/15, NS 35/7,5, color: gray Your advantages Tailor-made screw connection for multi-stranded aluminum conductors and copper wires Maintenance-free terminal points that are greased beforehand simplify the connection of aluminum conductors Extremely robust housing made from fiberglass-reinforced polyamide with V0 approval The special design of the UBAL enables the simultaneous connection of aluminum and copper conductors in various connections Key Commercial Data Packing unit 20 pc GTIN GTIN 4055626879208 Technical data General Note Terminal block for aluminum and copper conductors (AL-CU) Number of positions 1 Number of rows 1 Number of connections 2 Potentials 1 Nominal cross section 50 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Mounting type NS 35/15 Rated surge voltage 8 kV Degree of pollution 3

https://www.phoenixcontact.com/pi/products/1086465 01/21/2022 Page 2 / 7 High-current terminal block - UBAL 50 - 1086465 Technical data General Overvoltage category III Insulating material group II Maximum power dissipation for nominal condition 4.73 W Note The following values apply to aluminum conductors Maximum load current 145 A (with 50 mm² conductor cross section – test current in accordance with IEC 61238-1) Nominal current IN 145 A Nominal voltage UN 1000 V Note The following values apply to copper wires Maximum load current 150 A (with 50 mm² conductor cross section) Nominal current IN 150 A Nominal voltage UN 1000 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2.2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of flexion and pull-out test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 2.5 mm² / 0.7 kg 50 mm² / 9.5 kg Tensile test result Test passed Conductor cross section tensile test 2.5 mm² Tractive force setpoint 50 N Conductor cross section tensile test 50 mm² Tractive force setpoint 236 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 10 N Result of voltage-drop test Test passed Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1 Result of temperature-rise test Test passed Requirement temperature-rise test Increase in temperature ≤ 45 K Short circuit stability result Test passed Conductor cross section short circuit testing 50 mm²

https://www.phoenixcontact.com/pi/products/1086465 01/21/2022 Page 3 / 7 High-current terminal block - UBAL 50 - 1086465 Technical data General Short-time current 6 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 10 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s²)²/Hz Acceleration 3.12g Test duration per axis 5 h Test directions X-, Y- and Z-axis Shock test result Test passed Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 400 °C Dimensions Width 19.2 mm Length 82.5 mm Height 51 mm Height NS 35/7,5 51 mm Height NS 35/15 58.5 mm Connection data Note Screws with hexagonal socket The following values apply to aluminum conductors Connection method Screw connection Screw thread M10 Stripping length 23 mm Tightening torque max 12 Nm Connection in acc. with standard IEC 61238-1 Conductor cross section solid min. 6 mm² Conductor cross section solid max. 50 mm² Conductor cross section AWG min. 6 Conductor cross section AWG max. 1/0 Note The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228. Application notes on connecting aluminum conductors can be found in the download area. The following values apply to copper wires

https://www.phoenixcontact.com/pi/products/1086465 01/21/2022 Page 4 / 7 High-current terminal block - UBAL 50 - 1086465 Technical data Connection data Stripping length 23 mm Tightening torque, min 4 Nm Tightening torque max 12 Nm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 4 mm² Conductor cross section solid max. 50 mm² Conductor cross section AWG min. 6 Conductor cross section AWG max. 1/0 Conductor cross section flexible min. 25 mm² Conductor cross section flexible max. 35 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm² 2 conductors with same cross section, stranded min. 2.5 mm² 2 conductors with same cross section, stranded max. 16 mm² Standards and Regulations Connection in acc. with standard IEC 61238-1 IEC 60947-7-1 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 11.0 27141120 eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120

https://www.phoenixcontact.com/pi/products/1086465 01/21/2022 Page 5 / 7 High-current terminal block - UBAL 50 - 1086465 Classifications eCl@ss eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals UL Recognized / EAC Ex Approvals Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425 EAC RU C- DE.BL08.B.00534

https://www.phoenixcontact.com/pi/products/1086465 01/21/2022 Page 6 / 7 High-current terminal block - UBAL 50 - 1086465 Accessories Accessories End cover Cover plate - CEC UBAL 50 - 1086473 Cover plate, color: yellow Mounting material Antioxidant - PXC TERMINAL GREASE - 1108540 Antioxidant Terminal marking Marker for terminal blocks - UCT-TM 5 - 0828734 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Marker for terminal blocks - UCT-TM 5 OG - 0829155 Marker for terminal blocks, Sheet, orange, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Marker for terminal blocks - UCT-TM 5 BU - 0829157 Marker for terminal blocks, Sheet, blue, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72

https://www.phoenixcontact.com/pi/products/1086465 01/21/2022 Page 7 / 7 High-current terminal block - UBAL 50 - 1086465 Accessories Marker for terminal blocks - UCT-TM 5 YE - 0828735 Marker for terminal blocks, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Marker for terminal blocks - UCT-TM 5 RD - 0829154 Marker for terminal blocks, Sheet, red, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Marker for terminal blocks - UCT-TM 5 GN - 0829158 Marker for terminal blocks, Sheet, green, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Marker for terminal blocks - UCT-TM 5 VT - 0829156 Marker for terminal blocks, Sheet, violet, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of individual labels: 72 Phoenix Contact 2022 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com