1078800

1078800 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 1 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE for high switch-on currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 12 V DC Your advantages Direct connection of load return line thanks to actuator version Safe isolation according to DIN EN 50178 between coil and contact Max. inrush current of 130 A Functional plug-in bridges Key Commercial Data Packing unit 10 pc GTIN GTIN 4055626794532 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Type of note Notes on operation Note Separating plate PLC-ATP must be installed for voltages larger than

250 V (L1, L2, L3) between identical terminal blocks in adjacent

modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500.... Type of note Notes on operation Note The PLC-ATP separating plate should be installed for safe isolation between adjacent modules Type of note Assembly instruction: Note The PLC-ATP separating plate is required at the start and end of every PLC terminal strip. Type of note Notes on operation

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 2 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Technical data Note Note The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact. Dimensions Width 14 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Maximum altitude ≤ 2000 m Degree of protection RT II (Relay) IP20 (Relay base) ≥ IP54 (Installation location) Coil side Nominal input voltage UN 12 V DC Typical input current at UN 33 mA Typical response time 8 ms Typical release time 10 ms Coil voltage 12 V DC Protective circuit Reverse polarity protection Polarity protection diode Free-wheeling diode Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 0.4 W Contact side Contact type 1 N/O contact Type of switch contact Single contact Contact material AgSnO2 Maximum switching voltage

250 V AC/DC (The separating plate PLC-ATP should be installed for

voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8- Minimum switching voltage 12 V (at 100 mA) Min. switching current 100 mA (at 12 V DC) Maximum inrush current 80 A (for 20 ms)

130 A (peak, at capacitive load, 230 V AC, 24 μF)

Limiting continuous current 6 A

10 A (the value is permissible if both connections 13, both connections

14 and both connections BB are bridged) Interrupting rating (ohmic load) max. 144 W (at 24 V DC)

58 W (at 48 V DC)

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 3 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Technical data Contact side

48 W (at 60 V DC)

50 W (at 110 V DC)

80 W (at 220 V DC)

85 W (for 250 V DC)

1500 VA (for 250 V AC)

Interrupting rating (ohmic load) max. bridged 240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.) 2500 VA (for 250 V AC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.) Switching capacity min. 1200 mW Switching capacity 2 A (at 24 V, DC13)

0.2 A (at 110 V, DC13)

0.2 A (at 250 V, DC13)

6 A (at 24 V, AC15)

6 A (at 120 V, AC15)

6 A (at 250 V, AC15)

Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Flammability rating according to UL 94 V0 (Housing) Mechanical service life 3x 10 cycles Mounting position any Assembly instructions In rows with zero spacing Connection data Connection name Coil side Connection method Screw connection Stripping length 8 mm Screw thread M 3 Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Contact side Connection method Screw connection Stripping length 8 mm Screw thread M3

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 4 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Technical data Connection data 2 Conductor cross section AWG 26 ... 14 Standards and Regulations Designation Standards/regulations Standards/regulations EN 50178 EN 61810-1 Rated insulation voltage 250 V AC Rated surge voltage 6 kV Insulation Safe isolation, reinforced insulation Pollution degree 2 Overvoltage category III Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 5 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Diagram Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 6 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Diagram Interrupting rating

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 7 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Diagram Basic behavior of capacitive loads: - Very high inrush current - Voltage increases with an e-function Circuit diagram

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 8 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Articles in set Relay base - PLC-BSC- 12DC/ 1IC/ACT - 1090867 14 mm PLC basic terminal block for high switch-on currents with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 12 V DC Single relay - REL-MR- 12DC/1IC - 2904475 Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 12 V DC Classifications eCl@ss eCl@ss 10.0.1 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 5.0 EC001437 ETIM 6.0 EC001437 ETIM 7.0 EC001437 Approvals Approvals Approvals UL Listed / UL Recognized / cUL Recognized / cUL Listed / DNV GL / EAC / cULus Recognized / cULus Listed Ex Approvals Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 9 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Approvals UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 DNV GL https://approvalfinder.dnvgl.com/ TAE0000196-03 EAC TR_TS_D_00573_c cULus Recognized cULus Listed Accessories Accessories Bridge Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, length: 500 mm, color: red

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 10 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, length: 500 mm, color: blue Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, length: 500 mm, color: gray Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 11 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray Single plug-in bridge - FBST 14-PLC BK - 2967691 Single plug-in bridge, length: 14 mm, number of positions: 2, color: black DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 12 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 13 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 14 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 15 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 16 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories Marker for terminal blocks - ZB10,LGS:U-N - 1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Zack marker strip - ZB 12 CUS - 0824942 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5 Zack marker strip - ZB 12,LGS:L1-N,PE - 0812146 Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 17 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories Marker for terminal blocks - UC-TM 12 CUS - 0824613 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Marker for terminal blocks - UCT-TM 12 CUS - 0829630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30 Partition plate Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Power module Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2- component grip, with non-slip grip Terminal marking

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 18 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10 Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Zack marker strip - ZB 12:UNPRINTED - 0812120 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm, Number of individual labels: 5 Marker for terminal blocks - UC-TM 12 - 0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40

https://www.phoenixcontact.com/pi/products/1078800 09/12/2020 Page 19 / 19 Relay Module - PLC-RSC- 12DC/ 1IC/ACT - 1078800 Accessories Marker for terminal blocks - UCT-TM 12 - 0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30 Spare parts Relay base - PLC-BSC- 12DC/ 1IC/ACT - 1090867 14 mm PLC basic terminal block for high switch-on currents with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 12 V DC Single relay - REL-MR- 12DC/1IC - 2904475 Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 12 V DC Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com