1068857 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 1 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Axioline F XC, Bus coupler, PROFINET, RJ45 jack, Extreme conditions version, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector Product Description The bus coupler is intended for use within a PROFINET network. The bus coupler creates the link to the Axioline F I/O system and the industrial I/O signals connected to it. Up to 63 Axioline F devices can be connected to the bus coupler. Device descriptions for Phoenix Contact controllers are integral parts of the engineering tools PC Worx and PLCnext Engineer. Corresponding GSDML files are available for integrating the Axioline F station into other programming systems. These files can be downloaded at: phoenixcontact.net/product/1068857. Your advantages
2 Ethernet ports (with integrated switch)
Conformance with PROFINET specification V2.3 Supports PROFIsafe Supports PROFIenergy Supports PROFINET S2 system redundancy (firmware version 1.30 or later) PROFINET RT and IRT Minimum cycle time of PROFINET for RT and IRT is 250 μs Firmware can be updated Runtime in bus coupler is negligible (almost 0 µs) Typical cycle time of the Axioline F local bus is around 10 μs Web-based management Supports the operation of Axioline Smart Elements Supports the AXL SE SC slot cover (firmware version 1.30 and later) Supports IOL-CONF (firmware version 1.30 and later) Supports Diag+ Safe analog value processing with SAFE AI and other components Can be used under extreme ambient conditions Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet) Partially coated PCBs
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 2 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626743653 Custom tariff number 85176200 Country of origin Germany Technical data Dimensions Width 45 mm Height 126.93 mm Depth 75 mm Note on dimensions The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C (Standard, applications with UL approval, use in zone 2 potentially explosive area) -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Degree of protection IP20 Connection data Designation Axioline F connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm²
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 3 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Technical data Connection data Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail mounting Color traffic grey A RAL 7042 Net weight 222.6 g Note on weight specifications with connector and bus base module Degree of pollution 2 (IEC 60664-1, EN 60664-1) Mounting position any Interfaces Designation PROFINET Number of interfaces 2 Connection method RJ45 jack Note on the connection method Auto negotiation and autocrossing Transmission speed 100 Mbps (full duplex) Transmission physics Ethernet in RJ45 twisted pair Designation Axioline F local bus Number of interfaces 1 Connection method Bus base module Transmission speed 100 Mbps Designation Service Number of interfaces 1 Connection method USB type C Network/bus system Amount of process data max. 1012 Byte (Input, incl. max. 2 byte IOPS per local bus device) max. 1012 Byte (Output, incl. max. 2 byte IOPS per local bus device) max. 506 Byte (Input, incl. max. 2 byte IOPS per local bus device, with the use of the Phoenix Redundancy Layer (PRL)) max. 506 Byte (Output, incl. max. 2 byte IOPS per local bus device, with the use of the Phoenix Redundancy Layer (PRL)) Number of supported devices max. 63 (per station) Number of local bus devices that can be connected max. 63 Protocol PROFINET TFTP PTCP LLDP
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 4 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Technical data Network/bus system SNMP MRP DCP DDI BootP (BootP only to perform firmware updates) Axioline potentials Designation Communications power UL feed-in (the supply of the Axioline F local bus UBus is generated from UL) Supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current consumption max. 600 mA (with 2 A at UBus for the I/O and UL = 24 V) Power consumption max. 14.4 W (with 2 A load at UBus for the I/Os and UL = 19 V) Type of protection Surge protection Reverse polarity protection Designation Axioline F local bus supply (UBus) Supply voltage 5 V DC (via bus base module) Power supply unit max. 2 A Electrical isolation Test section PROFINET interface 1 / PROFINET interface 2 1500 V AC 50 Hz 1 min. PROFINET interface 1 / 24 V communications voltage (UL) feed-in 1500 V AC 50 Hz 1 min. PROFINET interface 2 / 24 V communications voltage (UL) feed-in 1500 V AC 50 Hz 1 min. PROFINET interface 1 / functional ground 1500 V AC 50 Hz 1 min. PROFINET interface 2 / functional ground 1500 V AC 50 Hz 1 min.
24 V communications voltage (UL) feed-in / functional ground 500 V AC 50
Hz 1 min. Standards and Regulations Immunity to ESD Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge Immunity to EF Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m Immunity to burst Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV Immunity to surge Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: ±1 kV
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 5 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Technical data Standards and Regulations Immunity to conducted interference Immunity test in accordance with EN 61000-6-2/IEC 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V Interference emission Noise emission test according to EN 61000-6-3/IEC 61000-6-3 Class B Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g ATEX II 3 G Ex ec IIC T4 Gc IECEx Ex ec IIC T4 Gc UL, USA / Canada cULus Class I, Zone 2, AEx ec IIC T4, Ex ec IIC T4 Gc X Class I, Div. 2, Groups A, B, C, D T4 Protection class III (IEC 61140, EN 61140, VDE 0140-1) Overvoltage category II (IEC 60664-1, EN 60664-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Block diagram UL RJ45 RJ45 24 V 3.3 V UBus UL 24 V Reset Service FE Ethernet 1 Ethernet 2 UBus Local bus LEDs UL Internal wiring of the terminal points Connection diagram LNK UL
24 V DC
(U )L BF SF RDY D E Ethernet LNK ACT ACT Connection of the cables
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 6 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Dimensional drawing 45 75 123 126,93 Classifications eCl@ss eCl@ss 10.0.1 27242608 eCl@ss 11.0 27242608 eCl@ss 4.0 27240490 eCl@ss 4.1 27240490 eCl@ss 5.0 27242208 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242608 eCl@ss 9.0 27242608 ETIM ETIM 3.0 EC001604 ETIM 4.0 EC001604 ETIM 6.0 EC001604 ETIM 7.0 EC001604 Approvals Approvals Approvals UL Listed / cUL Listed / PROFINET / cULus Listed Ex Approvals ATEX / cULus Listed / IECEx
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 7 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Approvals Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 PROFINET Z12931 cULus Listed Accessories Accessories Data cable by the meter Network cable - FL CAT5 HEAVY - 2744814 CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm², solid conductor, shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm ± 0.15 mm diameter Installation cable - FL CAT5 FLEX - 2744830 By the meter, Installation cable, Ethernet CAT5 (100 Mbps), shielded, PUR halogen-free, water blue RAL 5021, 4-wire (2x2xAWG26/7; SF/UTP), color single wire: white/orange-orange, white/green-green, cable length: Free entry (1.0 ... 1000.0 m) Data plug
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 8 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Accessories Assembly tool - FL CRIMPTOOL - 2744869 Crimping pliers, for assembling the RJ45 plugs FL PLUG RJ45..., for assembly on site Device marking Insert label - EMT (35X18,7)R - 0801831 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped, lettering field size: 35 x 18.7 mm, Number of individual labels: 500 DIN rail connector Bus connector - AXL BS BK - 2701422 Axioline F bus base module for housing type BK Plug RJ45 connector - FL PLUG RJ45 GR/2 - 2744856 RJ45 connector, shielded, with bend protection sleeve, 2 pieces, gray for straight cables, for assembly on site. For connections that are not crossed, it is recommended that you use the connector set with gray bend protection sleeve.
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 9 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Accessories RJ45 connector - FL PLUG RJ45 GN/2 - 2744571 RJ45 connector, shielded, with bend protection sleeve, 2 pieces, green for crossed cables, for assembly on site. For connections that are crossed, it is recommended that the connector set with green bend protection sleeves is used. Programming cable Connecting cable - CAB-USB A/ USB C/1,8M - 2404677 Connecting cable, for connecting the controller to a PC from USB A to USB C Connecting cable - CAB-USB C/ USB C/1,8M - 1021809 Connecting cable, for connecting the controller to a PC from USB C to USB C Software library Function block - SAFE AI - 2400057 Function block library for safety-related analog value acquisition with standard I/O modules. Please contact the safety hotline (+49 5281 9-462777) before ordering the SAFE AI article. Terminal marking
https://www.phoenixcontact.com/us/products/1068857 12/24/2021 Page 10 / 10 Bus coupler - AXL F BK PN TPS XC - 1068857 Accessories Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50 Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com