106760

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

© PHOENIX CONTACT 2019-06-05106760_en_04 TC ANT MOBILE... Data sheet

1 Description

This data sheet describes the accessories for mobile com- munications products. All mobile communications products from Phoenix Contact have an SMA antenna connection. Therefore, you can use the following antennas: Furthermore, antenna cables are also available for extending by 5 meters or 10 meters. Designation Order No. Mounting Image PSI-GSM-STUB-ANT 2313342 Mounting directly on device, installation not visi- ble from the outside in plastic control cabinets TC ANT MOBILE WALL 5M 2702273 Wall or mast mounting with mounting bracket, indoor or outdoor installation, suitable for LTE/4G TC ANT MOBILE WALL 0,5M 2702274 Wall mounting with mounting bracket, indoor or outdoor installation, suitable for LTE/4G PSI-GSM/UMTS-QB-ANT 2313371 Mounting on the control cabinet, with 2 m antenna cableTC ANT MOBILE/GPS 2903590 TC ANT MOBILE CABINET 10M 1046361 Mounting on the control cabinet, with 10 m antenna cable Make sure you always use the latest documentation. It can be downloaded at phoenixcontact.net/products. Mobile antennas and antenna cables

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 2 / 12

2 Table of contents

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 3 / 12

3 Ordering data

Antennas Type Order No. Pcs./Pkt. GSM antenna for direct mounting on the device, angled antenna plug (90°, SMA circular connector). The antenna is suitable for installation not visible from the outside in plastic control cabinets. PSI-GSM-STUB-ANT 2313342 1 Multiband mobile antenna with mounting bracket for outdoor installation, 5 m antenna cable with SMA circular connector, suitable for LTE/4G TC ANT MOBILE WALL 5M 2702273 1 Multiband mobile antenna for wall mounting, 0.5 m antenna cable, with SMA circular connector, suitable for LTE/4G TC ANT MOBILE WALL 0,5 M 2702274 1 GSM-UMTS antenna, with omnidirectional characteristics, 2 m antenna cable with SMA circular connector, for mount- ing on the control cabinet PSI-GSM/UMTS-QB-ANT 2313371 1 Combined mobile GPS antenna with omnidirectional charac- teristics, 2 m antenna cable with SMA circular connector (GSM/UMTS) and R-SMA circular connector (GPS) for mounting on the control cabinet TC ANT MOBILE/GPS 2903590 1 Mobile antenna for mounting on the control cabinet, 10 m antenna cable with SMA circular connector TC ANT MOBILE CABINET 10M 1046361 1 Antenna cables Type Order No. Pcs./Pkt. Mobile antenna cable, 5 m in length, SMA (male) -> SMA (female), 50 ohm impedance PSI-CAB-GSM/UMTS- 5M 2900980 1 Mobile antenna cable, 10 m in length, SMA (male) -> SMA (female), 50 ohm impedance PSI-CAB-GSM/UMTS-10M 2900981 1

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 4 / 12

4 PSI-GSM-STUB-ANT

The antenna is suitable for installation not visible from the outside in plastic control cabinets.

4.1 Dimensions

4.2 Mounting

Figure 2 Antenna for mounting directly on the device PSI-GSM-STUB-ANT 2313342 Frequency range 900 MHz / 1800 MHz Standing wave ratio (VSWR in a 50 ohm system) Typical <2.0 Gain Typical 0 dB Polarization Vertical General data Function GSM omnidirectional antenna Ambient temperature range -40°C ... 105°C Connection SMA circular connector, angled at 90° Dimensions Height Diameter 85.7 mm 10 mm Ø7,8 20,5 85,7 /g729² 25,6 Ø10 90° When installing in a control cabinet, reception may be strongly impaired. Interference-free oper- ation is not guaranteed.

• Use a GSM antenna with connecting cable (e.g., 2313371, PSI-GSM/UMTS-QB-ANT) and mount it outside the control cabinet.

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 5 / 12

5 TC ANT MOBILE WALL 5M and TC ANT MOBILE WALL 0,5M

Figure 3 TC ANT MOBILE WALL 5M Figure 4 TC ANT MOBILE WALL 0,5M TC ANT MOBILE WALL 5M 2702273 TC ANT MOBILE WALL 0,5M 2702274 Frequency range 700 MHz / 800 MHz / 850 MHz / 900 MHz /

1700 MHz / 1800 MHz / 1900 MHz / 2100 MHz /

2600 MHz / 3600 MHz

Standing wave ratio (VSWR in a 50 ohm system) <2.50 Gain (depending on frequency and connection assembly) 698 ... 960 MHz 1710 ... 2700 MHz 3400 ... 3800 MHz 3 dBi 5 dBi 8 dBi 3 dBi 5 dBi 5 dBi Power, maximum 30 W Polarization Vertical General data Function Multiband mobile antenna with omnidirectional characteristics Connection 5 m antenna cable with SMA circular connector 0.5 m antenna cable with SMA circular connector Dimensions Height Diameter 82 mm 48 mm Antenna housing material ASA ASA, aluminum, galvanized steel Degree of protection IP65 IP66 Mounting type Wall mounting or mast mounting, indoor or outdoor installation Wall mounting, indoor or outdoor instal- lation

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 6 / 12

5.1 Safety notes

5.2 Mounting with mounting bracket

Selecting the mounting location With the mounting bracket, you can mount the antenna onto a wall. Alternatively, you can also mount the TC ANT MOBILE WALL 5M to a mast. Mount the antenna vertically with the antenna cable facing downwards. Note that there must be a gap of at least 30 centimeters between the antenna and metallic parts or surfaces. Select the mounting location so that the antenna cable can be routed safely to the device. If you use screws, make sure that there is sufficient space behind the mounting area. Only use the mounting bracket supplied. Other brackets could impair the performance of the antenna. Select an antenna position providing good wireless network conditions. If you use two antennas on a 4G mobile communications device (MIMO), allow at least 20 centimeters distance between the antennas. This way, you will achieve optimum reception. TC ANT MOBILE WALL 5M, wall or mast mounting

• Wall mounting: Mount the mounting bracket. Use M5 machine screws or self-tapping screws. You can use the bracket as a drilling template (see Figure 5). Mast mounting: Mount the mounting bracket using a worm drive clip with a maximum width of 14 mm (see Figure 6).
• If you wish to mount the antenna permanently, you can also use the adhesive surface on the bottom side of the antenna. In this case, make sure that the surface of the bracket is clean and dry. Pull the foil off the adhesive surface. Press the antenna firmly onto the bracket.
• Fix the antenna firmly to the mounting bracket using the nut and washer supplied. Figure 5 TC ANT MOBILE WALL 5M, wall mounting Figure 6 TC ANT MOBILE WALL 5M, mast mounting WARNING: Risk of death due to electric shock Parts of the antenna are electrically conductive. Contact with live cables can lead to death or seri- ous injuries. – The antenna and the mast must not be in the vicinity of live cables during installation or re- moval. – If there is risk of lightning strikes: Make sure that the antenna is mounted and grounded by qualified specialist personnel in accordance with generally recognized technical regula- tions. WARNING: Fall hazard Make sure that the mounting location can be reached safely with the available equipment. CAUTION: High frequency Mount the antenna in such a way that persons will not be within a radius of 30 centimeters during op- eration. Ø14,3 16 205 37,2 15,3 135

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 7 / 12 TC ANT MOBILE WALL 0,5M, wall mounting

• Mount the mounting bracket. Use M5 machine screws or self-tapping screws. You can use the bracket as a drilling template.
• If you wish to mount the antenna permanently, you can also use the adhesive surface on the bottom side of the antenna. In this case, make sure that the surface of the bracket is clean and dry. Pull the foil off the adhesive surface. Press the antenna firmly onto the bracket.
• Fix the antenna firmly to the mounting bracket using the nut and washer supplied. Figure 7 TC ANT MOBILE WALL 0,5M, wall mounting

5.3 Mounting on a surface

Selecting the mounting location For optimum performance, mount the antenna on a suffi- ciently dimensioned electrically conductive grounding plate. Plates with a thickness of 1 mm ... 13 mm and a diameter of at least 200 mm are suitable. Note that there must be a gap of at least 30 centimeters between the antenna and other metallic parts. Make sure that there is sufficient space underneath the mounting surface. If you use two antennas on a 4G mobile communications device (MIMO), allow at least 20 centimeters distance between the antennas. This way, you will achieve optimum reception. Mounting

• Cover the plate around the hole to be drilled in order to protect the surface.
• Drill a small hole and enlarge it to a diameter of 14 mm. Make sure that you do not damage any parts under- neath the drill hole with the drill.
• Clean the surface surrounding the drill hole and remove any chipping. Remove paint and primer on the bottom side of the plate. Sufficient electrical contact must be ensured via the washer and the nut.
• Remove the washer and the nut from the antenna. Pull the foil off the adhesive surface.
• Feed the antenna cable through the drill hole.
• Press the antenna firmly onto the plate.
• Secure the antenna underneath the plate using the washer and nut. Tighten the nut.

5.4 Laying the antenna cable

• Route the antenna cable to the device.
• Do not route the cable in the immediate vicinity of other cables.
• Make sure that moving parts do not knock against the antenna cable. 34,5 Ø4,5 Ø48

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 8 / 12

6 PSI-GSM/UMTS-QB-ANT and TC ANT MOBILE/GPS

Frequency range 850 MHz / 900 MHz / 1800 MHz / 1900 MHz / 2100 MHz Gain (depending on frequency and connection assembly)

800 MHz / 900 MHz

1800 MHz / 1900 MHz

2100 MHz

Standing wave ratio mobile network (VSWR) <2 Standing wave ratio GPS (VSWR) - Typ. 1.5 General data Function Multiband mobile antenna for UMTS and quad band GSM, with omni- directional characteristics Combined mobile GPS antenna with omnidirectional characteristics Ambient temperature range -40°C ... 85°C Connection 2 m antenna cable with SMA circular connector 2 m antenna cable with SMA circular connector (GSM/UMTS) and R-SMA circular connector (GPS) Dimensions Height Diameter 21 mm 76 mm 23 mm 76 mm Degree of protection (mounted) IP69K IP69K

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 9 / 12

6.1 Mounting

Figure 8 Antenna for mounting on the control cabinet

• Drill a hole with a diameter of 16.5 mm into the top of the control cabinet.
• When mounting, please note that the antenna has a diameter of 76 mm. The cable has a length of 2 meters.
• Secure the antenna using the washer and nut provided. Figure 9 Mounting

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 10 / 12

7 TC ANT MOBILE CABINET 10M

This antenna is especially suited for mounting on the control cabinet. A 10 m antenna cable is supplied as standard.

7.1 Dimensions

TC ANT MOBILE CABINET 10M 1046361 Frequency range 850 MHz / 900 MHz / 1800 MHz / 1900 MHz / 2100 MHz Standing wave ratio (VSWR) <2 Gain (depending on frequency and connection assembly) Typical 2.2 dBi General data Function Multiband mobile antenna for UMTS and quad band GSM, with omnidirectional characteristics Ambient temperature range -40°C ... 85°C Connection 10 m antenna cable with SMA circular connector Dimensions (mounted) Height Diameter 15.9 mm 77.4 mm Material Cover Plate Seal ABS Zamak TPE Degree of protection (mounted) IP69K Ø28,5 17,5 15,6 Ø14Ø75,4

TC ANT MOBILE... 106760_en_04 PHOENIX CONTACT 11 / 12

7.2 Mounting

Figure 11 Antenna for mounting on the control cabinet

• Drill a hole with a diameter of 18.9 mm into the top of the control cabinet.
• When mounting, please note that the antenna has a diameter of 77.4 mm. The cable has a length of 10 meters.
• Secure the antenna using the washer and nut provided. Figure 12 Mounting

TC ANT MOBILE... 106760_en_04 12 / 12PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany phoenixcontact.com

8 Antenna cables

Each antenna cable is equipped with an SMA connector and socket. You can simply mount them without an additional adapter between the antenna and device. Figure 13 Antenna cables PSI-CAB-GSM/UMTS- 5M 2900980 PSI-CAB-GSM/UMTS-10M 2900981 Length 5 meters 10 meters Cable attenuation

850 MHz

900 MHz

1800 MHz

2600 MHz

1.15 dB 1.2 dB 1.75 dB 1.95 dB 2.2 dB 2.3 dB 2.4 dB 3.5 dB 3.9 dB 4.4 dB Impedance 50 Ω Frequency range 850 MHz / 900 MHz / 1800 MHz / 1900 MHz / 2100 MHz / 2600 MHz Connection SMA (male) - SMA (female) Bending radius, permanent 82 mm Outside diameter 5.5 mm Material of outer sheath LSFH Ambient temperature range -40°C ... 85°C We recommend using only one of these cables in applications. Otherwise attenuation is too high.