104-505-04 MARL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

l Material conforms to UL94 V-O flammability ratings l Bi-colour options available l Reverse polarity options available l Product illustrated 104-505-04 l Typically available ex stock PCB MOUNTING LEDs - Ø 5mm Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure up to = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.

FEATURES

104 SERIES

PACK QUANTITY = 250 PIECES PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC DC INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA lp Topr Tstg 104-505-04 Red Colour Diffused 2.0* 20 60 627 -40 ~ +85^ -40 ~ +85 Yes 104-511-04 Yellow Colour Diffused 2.1* 20 40 590 -40 ~ +85^ -40 ~ +85 Yes 104-514-04 Green Colour Diffused 2.2* 20 40 565 -40 ~ +85^ -40 ~ +85 Yes 104-530-04 Red/Green White Diffused 2.0/2.2* 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 104-581-20 Red Colour Diffused 5 10 50 627 -40 ~ +70 -40 ~ +85 Yes 104-582-20 Yellow Colour Diffused 5 10 20 590 -40 ~ +70 -40 ~ +85 Yes 104-583-20 Green Colour Diffused 5 10 20 565 -40 ~ +70 -40 ~ +85 Yes UNITS Vdc mA mcd nm 0C 0C STANDARD INTENSITY SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2008 : DS 058/07 Issue 3 Page 1 of 3 How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. * = Voltage DC for 20mA product is Vf@20mA, not Vopr BS EN ISO 9001:2000 Approved Manufacturer

Dimensions in mm (Typical) Not to scale SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2008 : DS 058/07 Issue 3 Page 2 of 3 How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Housing Material Polycarbonate This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suit able for use in the majority of automatic soldering processes. *Material test thickness 1.6mm LEDs LED Polarity Anode identification is shown in the dimensional diagram. The long lead of a non-cropped unit can also be used to help identify the anode. For the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’ sign. Reverse Polarity This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems with reverse polarity connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin and 3 pin Bi-colours can be supplied in reverse colour configuration. Lead Cropping Should lead cropping be required Marl of fer two standard lengths, either by request or by adding one of the following codes to the end of the p art number:- Other non-standard lead lengths are available on request. Bi-colour

2 Pin Operation

To achieve the second colour for a 2 pin Bi-colour unit the supply must be reversed, st andard colour configuration for these units is red anode to the ‘+’ sign. Electro-st atic Discharge (ESD) Build up of electrostatic discharge occurs in many situations involving people moving and handling product s. The range of possible situations is very diverse but voltage levels as high as several thousand volt s can and do arise in many individual situations. When an operator charged up to these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these product s. Although LEDs were never considered to be st atic sensitive devices, changes in manufacturing technology and materials used to produce higher intensity product s over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final p acking and despatch. We recommend all users of LED based product s follow the guidelines of BS 100015. Note: All luminous intensity figures refer to the unmodified discrete LED. Anode 6.2 2.54 4.6 6.3 5.0 3.1 6.221 0.5sq BS EN ISO 9001:2000 Approved Manufacturer

SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2008 : DS 058/07 Issue 3 Page 3 of 3 How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NO. COLOUR VOLTAGE DC (Vdc) Vopr 104-505-01 Red 2mA 104-505-01-29 Red 2mA 104-511-01 Yellow 2mA 104-514-01 Green 2mA 104-514-01-29 Green 2mA 104-514-04-24 Green 20mA 104-514-13-24 Green 20mA RP 104-555-04 Red 20mA 104-561-04 Yellow 20mA 104-564-01 Green 2mA 104-564-04 Green 20mA 104-583-20-29 Green 5/6Vdc UNITS Part numbers also available in the 104 Series: 505 & 511 514 530 The products listed above illustrate all of the options available to order . These products may have custom modifications that alter their operation beyond the generic information cont ained within this datasheet. Please contact sales for further information. BS EN ISO 9001:2000 Approved Manufacturer