DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© PHOENIX CONTACT - 03/2009103247_en_03 INTERFACE PLC-BS…-TTL/1 Data Sheet 1D e s c r i p t i o n The 6.2 mm PLC-BS…-TTL/1 PLC INTERFACE module with screw or spring-cage connection can be fitted with a solid-state relay or an electromechanical relay. The module operates with a supply voltage of 5 V DC at the input. The control input is designed for TTL (5 V). A further advantage is the ready-integrated input circuit, comprising status indicator, polarity protection function and surge protection function.

1.1 Plug-In Bridges Save Wiring

The PLC INTERFACE module achieves maximum efficiency with the user-friendly FBST plug-in bridge system. PLC-BS…-TTL/1 makes effect ive use of the bridging options for the A1/A2 connection on the control side and for the supply at connection 13 on the load side. Especially effective here are the 500 mm long color-insulated continuous plug-in bridges that can easily be cut to the required length and quickly inserted in the bridge shafts. They eliminate the need for complicated and time- consuming loop bridges.

1.2 Additional Advantages

– Switching capacity dependent on component fitted – Integrated input circuit – Inflammability class V0 in accordance with UL94 Make sure you always use the latest documentation. It can be downloaded at www.phoenixcontact.net/download This data sheet is valid for all products listed on the following page: Basic Terminal Block for Fitting With Solid-State Relay or Electromechanical Relay

PLC-BS…-TTL/1 103247_en_03 PHOENIX CONTACT 2 2O r d e r i n g D a t a

3 Technical Data

Description Type Order No. Pcs./Pck. Basic terminal block for fitting with solid-state relay or electromechanical relay, for mounting on 3, with screw connection PLC-BSC-TTL/1 2982689 10 Basic terminal block for fitting with solid-state relay or electromechanical relay, for mounting on 3, with spring-cage connection PLC-BSP-TTL/1 2982692 10 Accessories Description Type Order No. Pcs./Pck. Plug-in solid-state relay (input solid-state relay), input voltage 5 V DC OPT- 5DC/48DC/100 2967992 10 Plug-in solid-state relay with power contact, input voltage 5 V DC OPT- 5DC/24DC/2 2967989 10 Plug-in miniature relay with power contact, 1 PDT, input voltage 4.5 V DC REL-MR- 4.5DC/21 2961367 10 Plug-in miniature relay with multi-layer contact, 1 PDT, input voltage 4.5 V DC REL-MR- 4.5DC/21AU 2961370 10 Partition plate PLC-ATP BK 2966841 25 For additional accessories such as power terminal blocks and plug-in bridges, please refer to the INTERFACE catalog or www.phoenixcontact.com. The PLC-ATP BK partition plate should be used in the following cases: always fit at the start and end of a PLC terminal strip, for voltages potential bridging), and for safe isolation between adjacent modules. Input Data Rated control supply voltage UVN 5 V DC Rated control supply voltage range with reference to UVN 0,9 ... 1,2 x UVN Rated control supply current IVN with solid-state relay OPT- 5DC/48DC/100 with solid-state relay OPT- 5DC/24DC/2 with electromechanical relay REL-MR- 4.5DC/21 with electromechanical relay REL-MR- 4.5DC/21AU 6.2 mA 11.5 mA 41 mA 41 mA Rated actuating voltage UC (IN) 5 V DC (TTL) Rated actuating voltage range with reference to UC 0,9 ... 1,2 x UC Switching level 1 signal ("H") (TTL signal) 0 signal ("L") (TTL signal) > 2 V DC < 0.8 V DC Rated actuating current I C 2.5 mA Typical response time at UVN with solid-state relay OPT- 5DC/48DC/100 with solid-state relay OPT- 5DC/24DC/2 with electromechanical relay REL-MR- 4.5DC/21 with electromechanical relay REL-MR- 4.5DC/21AU 35 μs 35 μs 4.5 ms 4.5 ms Typical release time at UVN with solid-state relay OPT- 5DC/48DC/100 with solid-state relay OPT- 5DC/24DC/2 with electromechanical relay REL-MR- 4.5DC/21 with electromechanical relay REL-MR- 4.5DC/21AU 140 μs 320 μs 3.5 ms 3.5 ms

PLC-BS…-TTL/1 103247_en_03 PHOENIX CONTACT 3 Transmission frequency at UVN with solid-state relay OPT- 5DC/48DC/100 with solid-state relay OPT- 5DC/24DC/2 1000 Hz 500 Hz Input circuit Yellow LED, polarity protection 1, surge protection Surge protection > 6.5 V 1 Use a fuse to prevent short circuit in the event of polarity reversal. Input Data (Continued) Output Data with Solid-State Relay OPT- 5DC/48DC/100 OPT- 5DC/24DC/2 Nominal output voltage 48 V DC 24 V DC Maximum switching voltage 48 V DC 33 V DC Minimum switching voltage 3 V DC Limiting continuous current (see "Derating Curve" on page 4) 100 mA 3 A Voltage drop at maximum limiting continuous current < 1 V < 200 mV Output configuration 2-wire floating Output circuit Polarity protection1, surge protection Surge protection > 60 V > 35 V 1 Use a fuse to prevent short circuit in the event of polarity reversal. Output Data with Electromechanical Relay REL-MR- 4.5DC/21 REL-MR- 4.5DC/21AU Contact type Single contact, 1 N/O contact Contact material AgSnO AgSnO + 5 μAu1 Maximum switching voltage 250 V AC/DC 2 30 V AC/36 V DC Minimum switching voltage 12 V AC/DC 100 mV Limiting continuous current 6 A 50 mA Maximum inrush current On request 50 mA Minimum switching current 10 mA 1 mA Maximum power rating

24 V DC

48 V DC

60 V DC

110 V DC

220 V DC

250 V AC

Ohmic load τ = 0 ms 140 W 20 W 18 W 23 W 40 W 1500 VA Ohmic load τ = 0 ms 1.2 W Minimum switching power 120 mW 100 μW 1 If the specified maximum values are exceeded, the gold coating will be damaged. In subsequent operation, the AgSnO contact values given here will apply. This can then result in reduced service life, similar to dedicated power contacts. 2 The PLC-ATP BK partition plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points o n adjacent modules

PLC-BS…-TTL/1 103247_en_03 4PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: +49-(0) 5235-3-00 PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: +717-944-1300 www.phoenixcontact.com 4D e r a t i n g C u r v e Figure 1 Derating curve for basic terminal block with power solid-state relay OPT- 5DC/24DC/2 5B l o c k D i a g r a m s General Data Rated insulation voltage 250 V Impulse voltage withstand level 6 kV Ambient temperature range -20°C - 60°C Nominal operating mode 100% operating factor Inflammability class in accordance with UL 94 (housing) V0 Air and creepage distances between the circuits Basic insulation1 DIN EN 50178 Degree of pollution 2 Surge voltage category III Mounting position Any Mounting Can be aligned without spacing Conductor cross-section (solid and stranded) Screw connection Spring-cage connection 0.14 mm 2 ... 2.5 mm2 Stripping length 8 mm Dimensions (W x H x D) 6.2 mm x 86 mm x 80 mm Housing material Polyamide PA, color green 1 The PLC-ATP BK partition plate must be installed for safe isolation between adjacent modules (see "Accessories"). Potential bridging is then carried out Tests/Approvals CE c UL Applied for Mounted in rows without spacing Ambient temperature [°C] Load current [A] Mounted with spacing > 2 cm2 40 50 60 GND UVN IN 13+ GND UVN IN 13+