1027843 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Axioline F, IO-Link master, IO-Link ports Class A: 8, connection method: Push-in connection, connection technology: 3-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors Product Description The module is designed for use within an Axioline F station. The IO-Link master enables the operation of up to eight IO-Link devices. Alternatively, you can connect a standard digital sensor or actuator to each port. When used in combination with the Axioline F bus coupler, the IO-Link master is the connecting element that integrates IO-Link devices into a higher-level bus system. Your advantages Connection of eight IO-Link devices• Alternatively: connection of one digital sensor or actuator per port Connection of IO-Link devices in 3-conductor technology Connection of sensors in 3-conductor technology Connection of actuators in 2- and 3-conductor technology Parameter data storage on the master IO-Link specification V1.1.2 Substitute value behavior of inputs and outputs can be parameterized for each port Supports IOL-CONF (firmware version 1.02 or later) Device rating plate stored Commercial Data Item number 1027843 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key C21 Product Key DRI253 Catalog Page Page 89 (C-6-2019) GTIN 4055626523552 Weight per Piece (including packing) 215 g Weight per Piece (excluding packing) 215 g Customs tariff number 85176200 Country of origin DE Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 1 (11)
Height 129.9 mm Depth 54 mm Note on dimensions The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). Material specifications Color traffic grey A RAL 7042 Interfaces Axioline F local bus Number of interfaces 2 Connection method Bus base module Transmission speed 100 Mbps System properties Module Process data channel 512 Bit Input address area 64 Byte Output address area 64 Byte Input data Digital Description of the input IO-Link ports in digital input (DI) mode Number of inputs max. 8 (EN 61131-2 type 1) Connection method Push-in connection Connection technology 3-conductor Nominal input voltage UIN 24 V DC Input voltage range "0" signal -0.3 V DC ... 5 V DC Input voltage range "1" signal 11 V DC ... 30 V DC Nominal input current typ. 2.5 mA Sensor current per channel max. 1 A (from L+/L-) Input filter time 1 µs Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 2 (11)
Connection method Push-in connection Connection technology 3-conductor Port type Class A Output data Digital Output description IO-Link ports in digital output (DO) mode Connection method Push-in connection Connection technology 2-, 3-conductor Number of outputs max. 8 Nominal output voltage 24 V DC Nominal current per channel 200 mA Product properties Type block modular Product type I/O component Mounting position any (no temperature derating) Scope of delivery including bus base module and Axioline F connectors Insulation characteristics Overvoltage category II (IEC 60664-1, EN 60664-1) Pollution degree 2 (IEC 60664-1, EN 60664-1) Electrical properties Supply: IO-Link Nominal voltage for I/O supply 24 V DC
1 A (at L+/L-)Nominal current for every IO-Link port
200 mA (at C/Q) Overload protection for L+; electronically limited to 1.2 AProtective circuit Short-circuit protection for L+; by switching off after 5 ms Potentials: Axioline F local bus supply (UBus) Supply voltage 5 V DC (via bus base module) Current draw max. 50 mA Power consumption max. 250 mW Potentials: Feed-in of the supply voltage for the I/O devices (UO), including IO-Link port supply Supply voltage 24 V DC Supply voltage range 18 V DC ... 30 V DC (including all tolerances, including ripple) max. 8 A (in total, current consumption of I/O circuit and at C/Q as DO and at L+/L-) Current draw max. 60 mA (without connected peripherals) Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 3 (11)
Power consumption max. 192 W Surge protection; electronic (35 V, 0.5 s)Protective circuit Reverse polarity protection; parallel diode; with external 5 A fuse (only for commissioning) Connection data Connection technology Connection name Axioline F connector Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor connection Connection method Push-in connection Conductor cross section AWG 24 ... 16 Stripping length 8 mm Axioline F connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. Conductor cross section AWG 24 ... 16 Stripping length 8 mm Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Degree of protection IP20 Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level) Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Standards and regulations Protection class III (IEC 61140, EN 61140, VDE 0140-1) Mounting Mounting type DIN rail mounting Mounting position any (no temperature derating) Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 4 (11)
+24 V Connection example Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 5 (11)
122,4 129,9 Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 6 (11)
cULus Listed Approval ID: FILE E 238705 Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 7 (11)
ECLASS-9.0 27242608 ECLASS-10.0.1 27242608 ECLASS-11.0 27242608 ETIM ETIM 8.0 EC001604 UNSPSC UNSPSC 21.0 32151600 Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 8 (11)
Environmental Product Compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 9 (11)
Bus connector - AXL F BS H - 2700992 https://www.phoenixcontact.com/us/products/2700992 Axioline F bus base module for housing type H Zack marker strip Zack marker strip - ZB 20,3 AXL UNPRINTED - 0829579 https://www.phoenixcontact.com/us/products/0829579 Zack marker strip for Axioline F (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS- P1-PLOTTER Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 10 (11)
Zack Marker strip, flat Zack Marker strip, flat - ZBF 10/5,8 AXL UNPRINTED - 0829580 https://www.phoenixcontact.com/us/products/0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50 Network management software Network management software - IOL-CONF - 1083065 https://www.phoenixcontact.com/us/products/1083065 IOL-CONF is a browser-based configuration software tool for the easy startup of IO-Link masters and IO-Link devices Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Communication module - AXL F IOL8 2H 1027843 https://www.phoenixcontact.com/us/products/1027843 Dec 7, 2022, 6:35 AM Page 11 (11)