1021212 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Empty enclosure, Range of articles: PRC 35, color: black, rated voltage: 400 V Your advantages Time-saving plug-and-play installation with preassembled distributor boxes• Locking mechanism can be unlocked manually or using a tool Ideal for indoor and outdoor use due to weatherproof materials Customer-specific versions and assembly available on request Commercial data Item number 1021212 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB03 Product key ABLCCA GTIN 4055626513140 Weight per piece (including packing) 253.8 g Weight per piece (excluding packing) 140.354 g Customs tariff number 85472000 Country of origin PL PRC ED-T 3 CUT OUT - Empty enclosure 1021212 https://www.phoenixcontact.com/us/products/1021212 Mar 14, 2025, 2:13 AM Page 1 (5)

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Operate the connector only when it is fully plugged in.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the Safety note PRC ED-T 3 CUT OUT - Empty enclosure 1021212 https://www.phoenixcontact.com/us/products/1021212 Mar 14, 2025, 2:13 AM Page 2 (5)

cable without twisting it.

  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Power distributor Product family PRC 35 Insulation characteristics Protection class II Degree of pollution 2 Dimensions Width 104 mm Height 104 mm Length 70 mm Electrical properties Nominal voltage ATD 400 V (III/2.00) Material specifications Color (Housing) black (RAL 9005) Color of the housing part black Material Housing Polycarbonate Material Contact carrier PPE (Contact carriers) Material Contact CuZn (Contact material, Pb < 0.1) Flammability rating according to UL 94 V0 Seal material TPE Material of locking screw Polycarbonate, fiber-reinforced Environmental and real-life conditions Ambient conditions Degree of protection IP66/IP67/IP69 Ambient temperature (operation) -40 °C ... 70 °C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport) -40 °C ... 70 °C Ambient temperature (assembly) -5 °C ... 85 °C PRC ED-T 3 CUT OUT - Empty enclosure 1021212 https://www.phoenixcontact.com/us/products/1021212 Mar 14, 2025, 2:13 AM Page 3 (5)

ECLASS-11.0 27440109 ECLASS-12.0 27440109 ECLASS-13.0 27440603 ETIM ETIM 9.0 EC002567 UNSPSC UNSPSC 21.0 39121400 PRC ED-T 3 CUT OUT - Empty enclosure 1021212 https://www.phoenixcontact.com/us/products/1021212 Mar 14, 2025, 2:13 AM Page 4 (5)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com PRC ED-T 3 CUT OUT - Empty enclosure 1021212 https://www.phoenixcontact.com/us/products/1021212 Mar 14, 2025, 2:13 AM Page 5 (5)