AHC072 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
www.stego.de ACTUATOR HUB AHC 072 | IO-Link, DC 24 V, 3 Relais Outputs TECHNICAL DATA Number of relay outputs 1 to 3 contact makers (NO), with 3 optical indicators Max. switching capacity AC 240 V, 10 A DC 30 V, 10 A Max. inrush current AC 16 A for 10 sec. Actuator connection 2-pole Push-In terminals (3 x) IO-Link connection M12 round plug connector, IEC 61076-2-101, 4-pin, A-coded Electrical protection Reverse-polarity, short circuit, overvoltage protection Mounting clip for 35 mm DIN rail, EN 60715 and screw mounting (M5) Casing plastic according to UL94 V-0, light grey Dimensions 107 x 35 x 108 mm (116 mm with universal mounting bracket) Weight approx. 160 g Fitting position variable Operating temperature1 -40 to +70 °C (-40 to +158 °F) with 3 outputs with 2 A load each1 -40 to +40 °C (-40 to +104 °F) with 3 outputs with 10 A load each1 Storage temperature -40 to +85 °C (-40 to +185 °F) Operating/Storage humidity max. 90 % RH (non-condensing) Operating altitude ≤ 4,000 m above sea leavel Protection type/Protection class IP40 / III (SELV) Certificates CB No. DE1-63389 in conformity with IEC 61010-1 evaluated according to UL and CSA standards 1 The max. operating temperature depends on the current (see diagram) and the number of loads. The IO-Link Actuator Hub AHC 072 can switch up to three actuators or loads on process level via relays. Switching commands for the loads are received via the IO-Link interface from a higher-level control unit: edge computer, cloud, PLC control, etc. The actuator hub supports both AC and DC loads, independent of their function or whether they have a communication interface. This means that analog devices, such as heaters or filter fans, can easily be integrated into a digital network. The actuator hub combined with other products of the STEGO CONNECT product family can be built into a powerful IO-Link IIoT system. Please visit our website on www.stego-connect.com for further information. A universal mounting bracket is included for ideal positioning of the actuator hub on DIN rail or with screws within an application. > Digital IO-Link interface > Small size > Easy DIN rail or screw mounting > M12 plug-in connector > for 1 to 3 actuators > Quick connection for actuators via Push-In terminals > Optical indicators (LEDs) Art. No. Interface Operating voltage Power consumption max. Push-In terminals wire cross sections² ² stranded wire with wire end ferrule Load current I L [A] Ambient temperature T a [°C] Current in relation to temperature with 3 active relaysExample of connection Universal mounting bracket for DIN rail and screw mounting TECHNICAL DATASHEET