6ES7131-6BF01-0AA0 SIEMENS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Data sheet 6ES7131-6BF01-0AA0 SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Basic, type 2 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, input delay time 0,05..20ms, module diagnostics for: supply voltage General information Product type designation DI 8x24VDC BA HW functional status FS03 Firmware version V0.0
- FW update possible No usable BaseUnits BU type A0 Color code for module-specific color identification plate CC01 Product function
- I&M data Yes; I&M0 to I&M3
- Isochronous mode No Engineering with
- STEP 7 TIA Portal configurable/integrated from version V14
- STEP 7 configurable/integrated from version V5.5 SP3 / -
- PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
- PROFINET from GSD version/GSD revision GSDML V2.3 Operating mode
- DI Yes
- Counter No
- Oversampling No
- MSI No Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 70 mA; All channels are supplied from the encoder supply Encoder supply Number of outputs 8 Output voltage, min. 19.2 V Short-circuit protection Yes; per module
24 V encoder supply
- 24 V Yes
- Short-circuit protection Yes
- Output current per channel, max. 700 mA
- Output current per module, max. 700 mA Power loss Power loss, typ. 1.6 W; 24 V, 8 inputs supplied via encoder supply Address area Address space per module 6ES71316BF010AA0 Page 1/3 6/20/2023 Subject to change without notice © Copyright Siemens
- Inputs 1 byte Hardware configuration Automatic encoding Yes
- Mechanical coding element Yes
- Type of mechanical coding element Type A Selection of BaseUnit for connection variants
- 1-wire connection BU type A0
- 2-wire connection BU type A0
- 3-wire connection BU type A0 with AUX terminals or potential distributor module
- 4-wire connection BU type A0 + Potential distributor module Digital inputs Number of digital inputs 8 Digital inputs, parameterizable Yes Source/sink input P-reading Input characteristic curve in accordance with IEC 61131, type 1 Yes Input characteristic curve in accordance with IEC 61131, type 2 Yes Input characteristic curve in accordance with IEC 61131, type 3 Yes Input voltage
- Rated value (DC) 24 V
- for signal "0" -30 to +5 V
- for signal "1" +11 to +30V Input current
- for signal "1", typ. 6.8 mA Input delay (for rated value of input voltage) for standard inputs 500 µs, depending on line length) — at "0" to "1", min. 0.05 ms — at "0" to "1", max. 20 ms — at "1" to "0", min. 0.05 ms — at "1" to "0", max. 20 ms Cable length
- shielded, max. 1 000 m
- unshielded, max. 600 m Encoder Connectable encoders
- 2-wire sensor Yes — permissible quiescent current (2-wire sensor), max. 2 mA Interrupts/diagnostics/status information Diagnostics function Yes Alarms
- Diagnostic alarm Yes Diagnoses
- Diagnostic information readable Yes
- Monitoring the supply voltage Yes — parameterizable Yes
- Monitoring of encoder power supply No
- Wire-break No
- Short-circuit No
- Group error Yes Diagnostics indication LED
- Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
- Channel status display Yes; green LED
- for channel diagnostics No
- for module diagnostics Yes; green/red DIAG LED Potential separation Potential separation channels
- between the channels No
- between the channels and backplane bus Yes
- between the channels and the power supply of the electronics No 6ES71316BF010AA0 Page 2/3 6/20/2023 Subject to change without notice © Copyright Siemens
Isolation tested with 707 V DC (type test) Standards, approvals, certificates Suitable for safety functions No Ambient conditions Ambient temperature during operation
- horizontal installation, min. -30 °C; < 0 °C as of FS03
- horizontal installation, max. 60 °C
- vertical installation, min. -30 °C; < 0 °C as of FS03
- vertical installation, max. 50 °C Altitude during operation relating to sea level
- Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual Dimensions Width 15 mm Height 73 mm Depth 58 mm Weights Weight, approx. 28 g last modified: 9/24/2021 6ES71316BF010AA0 Page 3/3 6/20/2023 Subject to change without notice © Copyright Siemens