DSE9476 DSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
DEEP SEA ELECTRONICS PLC UK Highfi eld House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com DEEP SEA ELECTRONICS INC USA
3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL sales@deepseausa.com WEBSITE www.deepseausa.com Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only. Registered in England & Wales No.01319649 VAT No.316923457 055-244/01/18 (1) DSE9476 INTELLIGENT BATTERY CHARGER
24 V 20 AMP
95 V to 305 V (L-N)
47 Hz to 63 Hz (L-N)
20 A DC at 24 V DC
EFFICIENCY (At Full Load) >92% REGULATION LINE <0.5% LOAD TEMPERATURE SENSOR INPUT PT1000 PROTECTIONS Short Circuit DC Under & Over Voltage DC Over Current Reverse Polarity Over Temperature AC Under & Over Voltage CHARGE FAILURE RELAY
3 A 30 V DC volt free relay
7.2” x 9.2” x 3.0” WEIGHT 1.8 kg OPERATING TEMPERATURE RANGE -30 ºC to +80 ºC -22 °F to +176 °F STORAGE TEMPERATURE RANGE -40 ºC to +85 ºC -40 °F to +185 °F RELATED MATERIALS TITLE PART NO. DSE9400 Series Confi guration Suite PC Software Manual 057-159 DSE Confi guration Suite Installation & Operator Manual 057-151 DSE9476 Installation Instructions 053-235 DSE9400 Operator Manual 057-085 ADVANCED FEATURES
- Intelligent two, three and four stage charging profi les for different battery chemistries
- Adjustable current limit (maximum 20 A)
- Can be used as a battery charger, power supply or both at the same time
- Automatic or manual boost and storage charge functions to help maintain battery condition
- Digital microprocessor technology
- Temperature compensation for battery charging
- Low output ripple and tight load & line regulation
- Four indication LEDs
- Integrated ORing diode for paralleing applications
- 570W max output power Full Protection
- AC input under voltage
- AC input over voltage
- Battery charger output over voltage
- Battery charger output over current
- Battery low voltage detection
- Battery temperature compensation with over temperature protection
- Output short circuit and reverse polarity with auto recovery
- Automatic power de-rating at high ambient temperatures
- Optional battery temperature compensation using PT1000 temperature sensor
- Active power factor correction, 0.99 at full load (low line) Automatic Boost Mode
- Boosts and equalises cell charge improving battery performance and life Power Save Mode
- Once the battery is fully charged the chargers switch to eco-power to save energy Communication
- Can be integrated into external systems through MODBUS RTU using RS485
- Fully confi gurable via DSE Confi guration Suite PC Software for special charging requirements
- External remote LCD option
- DSENet® compatibility KEY BENEFITS
- Fully fl exible to maximise the life of the battery
- Suitable for a wide range of battery types
- Switched mode design
- Fault output
- 94.5% effi ency at high line, full load
- No external intervention for boost mode
- Multiple chargers can be linked together to provide larger current output
- Can be permanently connected to battery and AC supply. No need to disconnect through high load conditions
- Lightweight design <2Kg
- Works at very high ambient temperatures ( 80 ºC/185 °F)
- Fanless design
- Wide line voltage operation
- Plastic terminal cover available for safety
- Deep sleep mode to reduce power consumption from battery when mains supply unavailable DSEPower
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF BATTERY CHARGER APPLICATIONS ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment OPERATING TEMPERATURE RANGE BS EN 60068-2-1 Ab/Ae Cold Test -30 ºC BS EN 60068-2-2 Bb/Be Dry Heat +80 ºC * Refer to de-rating curve in the DSE9476 Operator Manual VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz ar +/-7.5 mm,
8 Hz to 500 Hz at 2 gn
Db Damp Heat Cyclic 20/55 ºC at 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 ºC at 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS The DSE9476 intelligent battery charger can be programmed for different charging curves to maximise the life of the battery. The DSE9476 is programmed using the user-friendly DSE Confi guration Suite PC software. The charger is mounted to the chassis using the fi xing holes that are built into the case. The chargers’ stylish design includes three coloured LEDs to indicate charging status and fault conditions. The chargers do not include any moving parts to give added durability and reliability. They will also continue to operate during engine cranking and running. Multiple chargers can be linked together to provide a larger current output. DSEPower DSE9476 INTELLIGENT BATTERY CHARGER 055-244/01/18 (1)