HGK047 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation. > Dynamic heating up > Energy saving > Wide voltage range > Clip fixing Example of connection Thermostat KTO 011 (NC) Heater HGK 047 clip for 35mm DIN rail TECHNICAL DATA Heating element PTC resistor – temperature limiting Heater body extruded aluminium profile, anodised Mounting clip for 35mm DIN rail, EN 60715 Fitting position vertical airflow (air outlet up, connection on bottom) Operating/Storage temperature -45 to +70 °C (-49 to +158 °F) Operating/Storage humidity max. 90 % RH (non-condensing) Protection type/Protection class IP44 / I (earthed) Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) Note other voltages on request Art. No. Operating voltage Heating capacity¹ Inrush current max. Recommended pre-fuse T (time-delay) Length (L) Weight (approx.) Connection Approvals 04700.0-00 AC/DC 120 – 240 V² 10 W 1.0 A 2.0 A 52 mm 0.1 kg 3 x 0,5 mm² x 300 mm cable (silicone) VDE EAC 04701.0-00 AC/DC 120 – 240 V² 20 W 2.5 A 4.0 A 60 mm 0.2 kg 3 x 0,5 mm² x 300 mm cable (silicone) VDE EAC 04702.0-00 AC/DC 120 – 240 V² 30 W 3.0 A 4.0 A 70 mm 0.2 kg 3 x 0,5 mm² x 300 mm cable (silicone) VDE EAC ¹ at +20 °C (+68 °F) ambient temperature, ² (min. 110 V, max 265 V) Operating with voltages below AC/D 140 V reduces heating performance by approx. 10 %. SMALL SEMICONDUCTOR HEATER HGK 047 | 10 W to 30 W HEATING TECHNICAL DATASHEET