GSP-8000 GWINSTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
The GSP-8000 series, brand new general spectrum analyzers from GW Instek, features three frequency ranges, namely 8.0GHz, 3.8GHz and 1.8GHz. The series is suitable for teaching research, R&D verification, and the test requirements of radio frequency products during production and development stages. The series provides 1Hz ~ 1MHz resolution bandwidth (RBW), 10Hz ~ 3MHz video bandwidth (VBW), - 104dBc/Hz phase noise, a 20dB preamplifier, and the lowest noise floor of - 160dBm/Hz (typical). With respect to measurement applications, GSP-8000 has built-in Time Spec function, AM/FM signal demodulation function, channel test (Channel Power Measurement) function, Pass-Mail function, etc. The Time Spec function can simultaneously observe and display the correlation between power, frequency and time. ACPR/OCBW/CHPW tests can be used to test adjacent channels, power occupation bandwidth ratio, and channel power. The Pass-Fail function can be used to determine whether the signal is within the set range. Users can use these functions to conduct a wide range of measurement applications. GSP-8000 utilizes a 10.4-inch TFT LCD large-size screen with XGA (1024*768) resolution to allow an easy observation of test signals. For communication interface, GSP-8000 provides two interfaces: USB and LAN. Through the USB Host, users can quickly retrieve the files stored after measurements, while USB Device and LAN interface allow users to control the instrument through dedicated PC software, or use the corresponding command set to design the required program. GSP-8000 provides EMI filter option. Customers can be activated through the corresponding software authorization (Soft-Key), which greatly improves usage efficiency. * Frequency Range GSP-8800 : 9kHz ~ 8.0GHz GSP-8380 : 9kHz ~ 3.8GHz GSP-8180 : 9kHz ~ 1.8GHz RBW: 1Hz ~ 1MHz in 1-3-5-10 steps* VBW: 10Hz ~ 3MHz in 1-3-5-10 steps* Phase Noise: -104 dBc/Hz* Sensitivity: -160dBm/Hz Typical* @PreAmp On Built-in AM/FM Demodulation* Built-in Time Spec Function* Measurement Function: ACPR/OCBW/CHPW,* NdB BW, Pass-Fail, Freq. Counter, Noise Marker Built-in 20dB Preamplifier* Communication Interface: LAN, USB Host/Device* Display: 10.4" XGA Output (1024*768)* Options: EMI Filter*
APPLICATIONS
- Checking and Analysis of Spectrum Characteristics Monitor the Signal Uploaded by SNG Vehicle* Analyze AM and FM Signal Characteristics* For a Compact RF Test System* Measuring the Frequency Response of RF Components* Cables, Attenuators, Filters and Amplifiers…etc.*
FEATURES
8.0GHz/3.8GHz/1.8GHz Spectrum Analyzer GSP-8000 Series
ORDERING INFORMATION
GSP-8000_E_D1DHSpecifications subject to change without notice. ADP-001 N(M)-BNC(F) Adapter ADP-002 N(M)-SMA(F) Adapter GTL-301 N(M)-N(M) RF Cable GTL-303 SMA(M)-SMA(M) RF Cable Power Cord, Safety Guide, USB Cable GSP-8800 GSP-8800(TG) GSP-8380(TG) GSP-8180(TG) 8.0GHz Spectrum Analyzer 8.0GHz Spectrum Analyzer with TG 3.8GHz Spectrum Analyzer with TG 1.8GHz Spectrum Analyzer with TG GSP-8800E1 EMI Activation Option for GSP-8800 GSP-8380E1 EMI Activation Option for GSP-8380 GSP-8180E1 EMI Activation Option for GSP-8180