030-1975-005

031-9134-001 ITT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 34

Technical content

DPXA connectors are one-piece shell miniature rack/panel connectors. The construction offers high strength and maximum utilization of insert area for contact arrangements accommodating up to 106 contacts. Shells are keystone-shaped for polar- ization. Operating temperature for the DPXA is DPXB - Polarized ARINC Shell DPXB connectors are DPXA connectors with an ARINC B shelf. Additional polarization is provided by three hexagonal polarizing posts. DPX2 - Two Gang DPX Series DPX2 connectors are the original two-gang versions of the DPX, and are made of the same materials and accommodate the same contact arrangements. Keystone shaped shells accommodate two DPX inserts with up to 212 contacts. The DPX2 has three polarizing posts with 99 polarizing positions. DPX2 - A - ARINC A Shell DPX2-A connectors are DPX2 connectors with an ARINC A shell. This shell type has the receptacle flange placed .344 (8.74) from the front of the engaging portion of the shell, and short aluminum alloy polarizing posts permit polarization before contacts engage. DPX3 - Three Gang DPX Series DPX3 connectors are three-gang versions of the DPX, made of the same materials, and accommo- date the same contact arrangements. The three- gang version can therefore accommodate up to a total of 318 in the keystone shaped shells, with three polarizing posts that are capable of providing up to 99 polarizing positions. DPX4 - Four Gang DPX Series DPX4 connectors are four gang versions of the DPX, made of the same materials, and can accommodate four separate arrangements that can total up to 424 contacts. The DPX4 has three polarizing posts with 99 polarizing positions. DPX*MA - LITTLE CAESAR' Contact Assembly DPX*MA connectors are DPX connectors with the LITTLE CAESAR contact assembly for rear in- sertion, release, and extraction of crimp type con- tacts. Insertion requires no tool; extraction requires an expendable plastic tool. A hard dielectric, closed-entry socket insert has lead-in chamfers for positive mating of contacts. Contacts are crimpable with the M22501 tool. DPX*ME - Environmental with LITTLE CAESAR Contact Assembly DPX*ME connectors are DPXMA connectors with environmental interfacial and grommet seals, and olive drab shell finish. receptacle flange placed .060 (1.52) from the front of the engaging portion of the shell, and polarizing posts permit polarization before the shells engage. DPX2-B - ARINC B Shell DPX2-B connectors supersede the DPX2-A and have an ARINC B Shell. This Shell type has the DPXA-34 DPX2-34B DPX3-34 DPXA/DPXB/DPX2 Aluminum alloy Cadmium plate with yellow chromate Melamine or Phenolic Copper alloy Gold Solder Pot Die Cast Cadmium Steel Cadmium Plate N/A Material Finish Material Material Finish Termination Material Finish Material Finish Material Shell Insulator Contacts Polarizing Posts Screws & Lockwashers Seals DPX*MA/DPX2*MA/ME Aluminum alloy Cadmium plate with yellow chromate for MA: olive drab for ME Diallyl phthalate or epoxy Copper alloy Gold Crimp Die cast Cadmium Steel Cadmium plate Silicone Specifications QQ- A-591/A380 QQ-P-416 MIL-M-14 QQ-C-533 MIL-G-45204 N/A QQ-P-416 QQS-630-637 QQ-P-416 N/A DPXB-33 DPX2-33B DPX4-33 ARINC 404 DPX Performance and Material Specifications (DPXA/DPXB/DPX*MA/DPX*ME) www.ittcannon.com

LESS CONTACTS* SERIES PREFIX TWO GANG SHELL CLASS CONTACT ARRANGEMENT (Side A) CONTACT TYPE CONTACT ARRANGEMENT (Side B) CONTACT TYPE SHELL TYPE SHELL STYLE MODIFICATION NUMBER POLARZING POSITION LESS CONTACTS* DPX DPX DPX DPX DPX - 34 - 33 P S - 1 - 00 01 - F0 32C2 A B MA - - 00 01 - 03 01 - 02 01 P P P B A B P P P MA MA - F0 - 33 - 33 - 34 - 57 - 57 - 57 SERIES PREFIX DPX - ITT designation CONTACT ARRANGEMENT SHELL STYLE MODIFICATION POLARIZING POSITION CONTACT TYPE SHELL TYPE 2 thru 106 (see pages 52-56) N o designator - original two-gang DPX A - ARINC A shell B - ARINC B shell See pages 68-71 See pages 71-72 SERIES PREFIX SHELL CLASS DPX - ITT Cannon designation 2 - Two gang No designator - Solder type MA - Crimp type with LITTLE CAESAR contact P for pin; S for socket 33 for plug; 34 for receptacle 2 thru 106 (see pages 52-56) 33 for plug; 34 for receptacle P for pin: S for socket DPXA - See page 68-71 DPXB - See pages 68-71 For DPXB shell style only A - Single shell B - Polarized ARINC shell No designator - Solder type MA - Crimp type with LITTLE CAESAR contact assembly ME - Environmental crimp type MB - Wire seperator MK - Mounting springs SHELL STYLE CLASS CONTACT ARRANGEMENT SHELL TYPE CONTACT TYPE MODIFICATION POLARIZING POSTION RoHS R R - RoHS compatible RoHS version RoHS R RoHS R - RoHS compatible ARINC 404 DPX How to Order www.ittcannon.com

DPXMA/ME DPXMA/DPXME - 0PX - 3 S hell Layouts DPXMA/DPXME - 0PX - 4 Shell Layouts SERIES PREFIX SHELL CLASS CONTACT ARRANGEMENT (Side A) CONTACT TYPE CONTACT ARRANGEMENT (Side B) CONTACT TYPE CONTACT ARRANGEMENT (Side C) CONTACT TYPE CONTACT ARRANGEMENT (Side 0) CONTACT TYPE SHELL TYPE MODIFICATION NUMBER POLARIZING POSITION **CONTACT TYPE P for pin; S for socket. Designation follows each arrangement as ordered for 3 or 4 gang versions. SHELL TYPE 33 for plug; 34 for receptacle MODIFICATION See pages 68-71 POLARIZING POSITION See pages 71-72Layout *E24 *F122 G122 *E142 *A166 171 201 *C205 B240 C240 *D244 A279 A318 *Applicable to "ME" only. Consult factory for similar layouts application to "MA." NOTE: For pictorial views of above layouts see pages 52-56. AW8 A,B,C A,B B C MA: ME: 32W4 A32W4 C C C Insert - Used in shell position as noted A,B A,B A,B,C A A,C A,B C A106 A106 C B B C A,B A,B A,B,C A,C A,B,C Layout 145 *B148 B150 *181 *B189 *A198 268 *E287 *220 *A233 279 *F287 *E326 A346 B346 385 A424 AW8 C,D A,B B C,D D B B B MA: ME: 32W4 A32W4 C,D A A,B,C B Insert - Used in shell position as noted D C,D A B A,B A,B,C,D B B,C,D A A C,D A,B A A106 A106 A C A A,C C,D C,D C,D A,C,D A,B C,D B,C,D A,B,C,D None None D A B A,C A,B,C DPX 3 ME - 57 P - 57 P - 57 P - 34 - 00 01 DPX 4 ME - 57 P - 57 P - 57 P - 57 P - 34 - 00 01 SERIES PREFIX DPX - ITT designation SHELL 3 - Three gang 4 - Four gang CLASS MA - Crimp type contacts in LITTLE CAESAR contact assembly ME - Environment- resistant, crimp type contacts *CONTACT ARRANGEMENT See pages 52-56 for applicable arrangements. Please specify each arrangement number as in- dicated in ordering nomenclature for 3 or 4 gang if not listed below. ARINC 404 DPX How to Order www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

1.614 +_.006 (41.00 +_ 0.15) .750 +_.005 (19.05 +_ 0.13) .995 +_.005 (25.27 +_ 0.13) 1.060 (26.92) All tolerances +_ .015(0.38) unless otherwise noted. .125 (3.18) .750 (19.05) 1.157 (29.39) .782 (19.86) .125 (3.18) .344 (8.74) MAX.GROMMET EXTENSION MAX.GROMMET EXTENSION 1.061 (26.95) 1.405 (35.69) .060 (1.52) .125 (3.18) .954 (24.23).766 (19.46) .125 (3.18) 1.541 (39.14) MAX. 2.320 (58.93) MAX. WITH COAX NOTE: DPXME AND DPXNE GROMMETS ARE APPLICABLE TO ALL SHELL SIZES 1.634 (41.50) MAX. 2.413 (61.29) MAX. WITH COAX NOTE - ARINC requires that DPXB shells are mounted with the polarizing posts at the top. See pages 71-72 2.062 +_.005 (52.38 +_ 0.13) 1.750 +_.016 (44.45 +_ 0.41) 2.062 +_.005 (52.38 +_ 0.13) .720 +_.005 (18.29 +_ 0.13) 1.720 +_.005 (43.69 +_ 0.13) .718 +_.005 (18.24 +_ 0.13) 1.750 +_.005 TYP. (44.45 +_ 0.13) .720 +_.005 (18.29 +_ 0.13) 1.720 +_.005 (43.69 +_ 0.13) .718 +_.005 (18.24 +_ 0.13) 2.000 (50.80) 2.047 (52.00) 2.000 (50.80)TWO HOLES .120 (3.05) DIA. FOR MTG. REF. ONLY POLARIZING POST 1.437 (36.50) REF. .750 +_.005 (19.05 +_ 0.13) 1.125 +_.015 (28.58 +_ 0.38) .125 R.TYP (3.18) .125 R.TYP (3.18) MTG.DATUM MTG.DATUM 2.012 (51.11) .120 (3.05) DIA. 4 MTG. HOLES

3 POLARIZING

TWO HOLES .120 (3.05) DIA. FOR MTG. REF. ONLY .187 R.TYP (4.75) 2.312 (58.73) 1.125 (28.58) 2.312 (58.73) .120 (3.05)DIA. 4MTG. HOLES .120 (3.05)DIA. 4MTG. HOLES 82 X.230 (5.84) DIA.

4 HOLES

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

2.062 +_ .005 (52.38 +_ 0.13) 2.062 +_ .005 (52.38 +_ 0.13) 1.750 +_ .010 (44.45 +_ 0.41) 2.438 +_ .010 (61.92 +_ 0.25) 2.438 +_ .010 (61.93 +_ 0.25) 1.437 +_ .005 (36.50 +_ 0.13) 1.750 +_ .016 (44.45 +_ 0.41) FLOATING EYLETS .116 (2.95) I.D. FOR #4-40 SCREWS SHOWN FOR REF. 1.437 +_ .005 (36.50 +_ 0.13) 2.783 +_ .005 (25.10 +_ 0.13) .954 +_ .005 (24.23 +_ 0.13) 2.468 +_ .010 (62.69 +_ 0.25) JUNCTION SHELL TABS SHOWN FOR REF. 1.125 (28.58) .125 (3.18) 1.015 (25.78) .344 (8.74) .766 (19.46) .125 (3.18) JUNCTION SHELL TABS SHOWN FOR REF 2.783 +_ .005 (70.69 +_ 0.13) 3.110 (78.99) 3.109 (78.97) AB TOP B A TOP B APOT B APOT 6 HOLES .120 (3.05) DIA. FOR #4-40 SCREWS .718 +_ .005 (18.26 +_ 0.13) .720 +_ .005 (18.20 +_ 0.13) TYP. .720 +_ .005 TYP. (18.20 +_ 0.13) 2.000 (50.80) 2.000 (50.80) .988 +_ .005 (25.09 +_ 0.13) 2.814 +_ .010 (71.48 +_ 0.41) 3.063 (77.80) .063 (1.60) JUNCTION SHELL TABS SHOWN FOR REF. .125 (3.18) .766 (19.46) .125 (3.18) .063 (1.60) 1.016 (25.81) .344 (8.74) JUNCTION SHELL TABS SHOWN FOR REF. 1.125 (28.58) All tolerance are +_ .015 (0.38) unless otherwise noted. 3.063 (77.80) .750 +_ .005 TYP. (19.05 +_ 0.13) .750 +_ .005 TYP. (19.05 +_ 0.13) 8 HOLES .120 (3.05) DIA. FOR #4-40 SCREWS 8 HOLES .120 (3.05) DIA. FOR #4-40 SCREWS MTG. DATUM MTG. DATUM MTG. DATUM MTG. DATUM TWO POLARIZING POSTS CENTER POLARIZING POST TWO POLARIZING POSTS CENTER POLARIZING POST 2.312(58.73) 2.312(58.72) .375 TYP. (9.52) .375 +_ .005 TYP. (9.52 +_ 0.13) DPX2-34 Shell DPX2-33A ARINC A Shell DPX2-34A ARINC A Shell ARINC 404 DPX Two Gang www.ittcannon.com

DPX2-33F (Female) DPX2-34F (Female) DPX2-34M (Male) DPX2-33M (Male) DPX2-34B .988 +_.004 (70.69 +_ 0.13) 2.468 +_.015 (62.69 +_ 0.38) .718 +_.005 (18.24 +_ 0.13) .720 +_.005 (18.29 +_ 0.13) 1.750 +_.015 (44.45 +_ 0.38) .060 (1.52) .125 (3.18) 1.061 (26.95) All tolerances are +_ .015(0.38) unless other wise noted. 1.437 (32.50) REF 2.000 (50.80) 4 MTG. HOLES .120 (3.05) DIA. FOR #4-40 SCREWS .766 (19.46) .125 (3.18) MTG DATUM .954 (24.23) .3.075 (78.10) 2 HOLES .120 (3.05) DIA. FOR MTG. REF.ONLY 2.783 +_.005 (70.69 +_ 0.13) .718 +_.005 (18.24 +_ 0.13) .988 +_.005 (25.09 +_ 0.13) .375 +_.005 (9.52 +_ 0.13) 2.676 +_.016 (67.97 +_ 0.41) 2.062 +_.006 (52.38 +_ 0.15) 2.438 +_.006 (61.92 +_ 0.15) 1.612 +_.005 (40.94 +_ 0.13) .750 +_.005 (19.05 +_ 0.13) TYP. 2.814 +_.016 (71.48 +_ 0.41) 2.062 +_.006 (52.38 +_ 0.15) 1.750 +_.016 (44.45 +_ 0.41) 2.438 +_.010 (61.92 +_ 0.25) .750 +_.005 (19.05 +_ 0.13) TYP. 2.062 +_.006 (52.38 +_ 0.15) 1.612 +_.005 (40.84 +_ 0.13) 2.438 +_.010 (61.92 +_ 0.25) BPOTA AB POT B AB TOP TOP AB POTA B APOT .750 +_.005 (19.05 +_ 0.13) TYP. .375 +_.005 (9.52 +_ 0.13) 2.676 +_.016 (67.97 +_ 0.41) 2.438 +_.005 (61.92 +_ 0.13) 2.062 +_.006 (52.38 +_ 0.15) 1.750 +_.016 (44.45 +_ 0.14) .188(4.78) R. TYP. 3.725 (94.62) MAX. 2.032 (51.61) N 8 HOLES .120(3.05)DIA FOR #4-40 SCREWS 2.312 (58.72) COUPLING NUT .750 +_.005 (19.05 +_ 0.13) TYP. 375 +_.005 (9.52 +_ 0.13) 2.814 +_.016 (71.48 +_ 0.41) .344 (8.74) 1.016 (25.81) .063 (1.60) .125 (3.18) 1.125 (28.58) TWO POLARIZING POSTS .766 (19.46) .063 (1.60) 3.063 (77.80) .125(3.18) .988 (25.09) 1.88(4.78) R. TYP. 2.256 (57.30) MAX. DPX2-34M with extended hex, knob type -0501; example, DPX2-34M-0501 DPX2-34M with wing handle type -0901; example, DPX2-34M-0901 8 HOLES .120 (3.05) DIA FOR #4-40 SCREWS STANDARD SUPPLIED WITH HEX. SLOTTED KNOB COUPLING SCREW TWO POLARIZING POSTS 3.063 (77.80) 2.312 (58.72) COUPLING SCREW TWO POLARIZING POSTS 3.063 (77.80) 2.312(58.72) .375 +_.005 (9.52 +_ 0.13) 8 HOLES .120 (3.05) DIA FOR #4.40 SCREWS .188 (4.78) R. TYP .344 (8.74) 3.063(77.80) COUPLING NUT TWO POLARIZING POSTS 8 HOLES .120(3.05)DIA FOR #4-40 SCREWS .188 (4.78) R. TYP SEE DPX2-33M FOR DETAILS .063 (1.60) 1.016 (25.81) .125 (3.18) 1.125 (28.58) .063 (1.60) .766 (19.46) 2.312 (58.72) .125 (3.18) .720 +_.005 (18.29 +_ 0.13) 1.437 (36.50) REF 3.110 (78.99) 2.000 (50.80) .188 (4.78)R. TYP. 2 HOLES .120(3.05)DIA. FOR MTG.REF.ONLY MTG.DATUM .120 (3.05)DIA. & C' SUNK 82 X .230 (5.84) DIA. 4 HOLES SHOWN FOR REF. + + ARINC 404 DPX Two Gang - ARINC B Shell www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Two Gang - Screw Coupling Engaging Devices

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change DPX3-33 DPX3-34 DPX4-34DPX4-33 All tolerances are +_ .015(0.38) unless other wise noted. 1.612 (40.94) 2.000 (50.80) 4.354 (110.59) 4.026 (102.26) .988 (25.10 .766 (19.46) .125 (3.18) MTG. DATUM 1.750 (44.45) 2.000 (50.80) .718 (18.24) .282 (7.16) 1.437 (36.50)

6 MTG HOLES

.120 (3.05) DIA. 4.026 (102.26) 4.318 (109.68) .060 (1.52) 1.061 (26.95) 3.711 (94.26) .125 (3.18) 1.061 (26.95) .060(1.52) 2.468 (62.69) 2.783 (70.69) .125 (3.18) .282 (7.16) 3.860 (98.04) 3.610 (91.69) .930 (23.62) 1.648 (41.86) MTG.DATUM

10 MTG HOLES

.120 (3.05) DIA. 3.075 (78.10) .125 (3.18) .766 (19.46) 2.783 (70.69) .988 (25.10) .180 R. TYP. (4.57) .282 (7.16) .930 (23.62) 1.648 (41.88) MTG. DATUM 3.110 (78.99) 1.612 (40.94) 3.860 (98.04) MTG. DATUM .718 (18.24) .282 (7.16) 1.437 (36.50) .180 R. TYP. (4.57) Four Gang

10C3* B16C3* 25C3* Contact Arr. No. of Contacts & Wire size Test Voltage AC (RMS) 10C3 B16C3 25C3 NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data PIN Contact Type Code R AB Consult Factory K A B Same as Socket (Use C7) C AA Z 1-8 L l L J M A M B M C M K M Z M AA L L L K L C L A L B L Z L AA SOCKET Contact Type Code R Consult Factory AC F G Same as Pin Same as Pin K Same as Pin Same as Pin Same as Pin 1-8 Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Contact Numbers 1-2 1-2 1-7 1-7 1-7 1-7 1-7 1-7 1-4, 8-10 5,6,7 1-4, 8-10 5,6,7 4-16 1-3 4-16 1-3 4-16 1-3 4-16 1-3 4-16 1-3 4-16 1-3 1-17 1-23 4-25 1-3 4-25 1-3 4-25 1-3 4-25 1-3 4-25 1-3 4-25 1-3 No. of Contacts Contact Numbers 1-2 1-2 1,2,4,5 3,6,7 1-7 L F G 4-25 1,3 22 (#20). 3 coax 23 #20 17 #20 13 #16 3 coax 7 #20 3 coax 8 #12 7 coax 2 coax (RG-9/U) 1000 (1-7)V 1000 (1,2)V matched impedance 2000V 1500 (4-16)V 1000 (1-3)V 1500 (1-4, 8-10)V 2000V 1500 (4-25)V. 1000 (1-3)V 2000 (15-23). 1500 (1-14)V. No. of Contacts N Contacts Arr. No. C2C C2M C7A C7B C7B C7M C7X C7AA 10C3 A10C3 B16C3 C16C3 G16C3 J16C3 ZE16C3 ZF16C3 25C3 F25C3 G25C3 J25C3 Q25C3 R25C3 ARINC 404 DPX Contact Arrangement Variations Solder Type (Captive Contacts) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

26* 30C4 32C2* 40* 40C1* 45* 57* 67* Contact Arr. Contact Arr. No. Contact Numbers Contact Numbers No. of Contacts PIN SOCKET No. of Contacts No. of Contacts & Wire Size Test Voltage AC (RMS) Contact Type Code Contact Type Code Same as Pin1-26 1,6 14-26 2-5, 7-13 27-30 1,6 14-26 2-5, 7-13 27-30 1,6 14-26 2-5, 7-13 27-30 1,3,4,7-32 2,5,6 Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin L F L F 1-39 1-30 A1, A2 1-30 A1, A2 1-30 A1, A2 1-30 A1, A2 1-30 A1, A2 1-30 A1, A2 1-30 A1, A2 1-40 1-39 1-39 1-39 1-39 1-39 1-39 1-45 1-57 1-2,6-65 3-5 L M L L L A L AA L Z L C L K L B L L AA L Z L B L A L K L M L M A L M AA L M Z M26 4545 L40C1 K40C1 J40C1 F40C1 A40C1 40C1 N32C2 M32C2 D32C2 C32C2 A32C2 32C2 C30C4 B30C4 A30C4 261500V26 #16 15 #20. 11 #16, 4 coax 123456 78910111213 141516171819 20212223242526 3456 789101112131415 1617181920212223 242526272829303132 A2 A1 123456 789101112 13141516 17181920 21222324 252627282930 123456 7891011121314 151617181920212223 2425262728293031 1234567 1819 1819 202122232425 262728 202122232425262728 303132333435 3839 363738 303132333435363738 39404142434445 39404142 39404142 4344454647 4344454647 48495051525354555657 48495051525354 55565758596061626364656667 3334353637383940 2345 78910111213 14151617181920212223242526 27282930 3 #16 29 #20 30 #20 2 coax 40 #20 39 #20 1 coax 45 #20 57 #20 64 #20 3 #16 1500 (2-5 & 7-13)V 1000 (1,6 & 14-26)V 2000 (1-6) 1500 (7-32)V 1500 (1-30)V 1000 (A1, A2)V 1500V 1500 (1-39)V 1000 (A1)V 1500V 1500V 1000V L C Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin Same as Pin 30C4 32C2 40C1 NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data ARINC 404 DPX Contact Arrangement Variations Solder Type (Captive Contacts) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

ARINC 404 DPX*MA/ME Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change W8 A10 10W3 B16W3 25W3 W8 (For MA) AW8 (For ME) A10 10W3 SOCKET ONLY B16W3 25W3 Contact Arr. No. of Contacts & Wire Size Test Voltage AC (RMS) Contact Arr. No. No. of Contacts Contact Numbers Contact Size or Code Letter 8 #12 1234 5678 2526 C8A C8B C8C C8E C8G C8H A10 10W3 A10C3 B10C3 B16W3 25W3 25A3 25B3 25D3 26 26 coax G F H R S AB B 20 H.D. coax 20 H.D. AC 20 H.D. AC coax coax C D B 1-8 1-4 5-8 1-8 1,2 3-10 1-3, 5, 6, 8-10 4, 7 1-4, 8-10 5-7 4-16 1-3 4-25 1-3 1-26 1000V (1-8)V 1500V 1500V 1500 (1-4, 8-10)V 1500 (4-16) 1000 (1-3)V socket side only (Not avaiable in ME series) 1500 (4-25)V, 1000 (1-3)V (Not available in ME series) 1500V 4 #16, 4 #12 8 coax 2 #8, 8 #20 8 #16, 2 #4 7 #20, H.D., 3 coax 13 #16, 3 coax 22 (#20) 3 coax 26 #16 Crimp rear release coaxial contacts. NOTE: See pages 62-65 for Coaxial Contact data See pages 57-58 for Crimp Contact data

32W2 (For MA) A32W2 (For ME) 32W4 (For MA) A32W4 (For ME) 36W7 40W1 (For MA) A40W1 (For ME) 32W4 36W7 40W1 Contact Arr. No. of Contacts & Wire Size Test Voltage AC (RMS) Contact Arr. No. No. of Contacts Contact Numbers Contact Size or Code Letter 30 #20, 2 coax 123456 789101112 13141516 17181920 21222324 252627282930 A1A2 12345678910 123456 123456 1234567 891011121314 8910111213 8910111213 15 11 1213 16171819 202122 2021222324 293031 262728293031 262728293031 3233343536373839 32333435 32333435 36373839 36373839404142434445 A1A2A3 A4A5A6A7 1500 (1-30), 1000 (A1,A2)V 1500 (1-28), 1000 (29-32)V 1000 1500V 1500 (1-39) 1000 (A1)V 1500V 24 #20 H.D. 4 #16, 4 coax 29 #22 7 coax (Size 5) 40 #20 39 #20, 1 coax 45 #20 32W2 32A2 32B2 32C2 D32C2 32F2 32G2 32W4 32C4 B32C4 C32C4 D32C4 E32C4 H32C4 40W1 40B1 40F1 F40C1 coax B A D J P C coax 20 H.D. S 20 H. D. H 20 H. D. R 20 H. D. G 20 H. D. AA 20 H. D. AB 20 H. D. coax B P J 1-30 A1,A2 29-32 1-7, 10-22 25-28 8, 9, 23, 24 1-40 1-39 1-45 **Crimp rear release coaxial contacts. NOTE: See pages 62-65 for Coaxial Contact data See pages 57-58 for Crimp Contact data ARINC 404 DPX*MA/ME Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

ARINC 404 DPX*MA/ME Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change NOTE: See pages 62-65 for Coaxial Contact data See pages 57-58 for Crimp Contact data Contact Arr. 57 57 #20 1234567 1234567 22232425262728 22232425262728 303132333435363738 303132333435363738 39404142 39404142 4344454647 434445464748 525354 525354 555657 555657 58596061626364656667 112 106 1500V 57 57 2 01 -57 1-2, 6-67 3, 4, 5 1-106 20 H.D. 106 A106 1500 (3-5) 1000 (1, 2, 6-67)V 1000V 64 #20 H.D. 3 #16 106 #22 **Crimp rear release coaxial contacts. †A106 arrangements have the POS-ALINE connector design. See below. NOTE: Engaging force of each layout arrangement shall not exceed 45 lbs. maximum. For high density A106 contact arrangement PLUG INSULATOR PIN SOC KET In the POS-ALIGN connector construction the entire pin contact is recessed in an individual cavity in the plug insulator while the sturdy socket members are exposed and extend from the connector receptacle face. There is a lead-in chamfer that guides the socket contact into the pin cavity assuring proper contact alignment during mating and protecting the pin contact from damage and wear. RECEPTACLE INSULATOR A106† A106† No. of Contacts & Wire Size Test Voltage AC (RMS) Contact Arr. No. No. of Contacts Contact Size or Code Letter Contact Numbers Positive Contact Alignment Design

The crimp contacts are shipped with the connector, not installed. Additional contacts may be ordered using the part numbers listed below. All tools must 2222 Pin 030-1975-007 031-1113-007 030-9081-000 031-9134-001 030-9081-003 031-9134-004 030-9083-001 031-9206-004 030-1909-001 031-1059-001 030-1908-001 031-1154-000 030-2049-000 031-1151-000 030-1975-005 031-1113-008 030-2040-000 031-1046-002 030-1892-002 031-1047-002 030-1893-002 031-9206-021 030-2045-000 031-1059-002 030-1908-001 031-1154-000 030-2049-000 031-1151-000 Socket 22,24,26 M22520/2-01 M22520/2-23 CIT-DPXMA-22 M81969/1-01 A106 10, A32W2, 40, A40W1, 45,57 10W3 A32W4, D8, A10, 26, A32W4, A10 A106 10, 25W2, 32W2 40, 40W1, 45,57 10W3 32W4, D8, A10, B16W3, 26, 32W4, A10 CIET-20 (274-7001-000) CIET-20 M81969/1-02 (980-0004-805) CIET-16 (274-7002-000) CIET-12 (274-7003-000) CET-8-2 (323-7004-000) CET-4-8 (323-7008-000) M22520/2-02 Std. Locator Std. Locator M22520/2-08 Standard M22520/1-02 Std. Locator M22520/1-11 CCH8-1 Head CCHP-8-6 CCH4-1 Head CCHP-4-8 M22520/2-01 M22520/2-01 M22520/1-01 M22520/1-01 MS-3191-1 MS-3191-1 MS-3191-1 CBT-600* CBT600B* CBT-600* CBT600B* MS-3191-3 20,22,24 20,22,24 16,18,20 12,14 Pin Socket Pin Socket Pin Socket Pin Pin Pin Socket * Requires air line pressure of 80 to 100 psi. These DPXME contacts are being superseded in favor of military DPXNE/NA contacts, this applies to all existing DPXME connector assemblies, except for size 20 contacts. Socket Socket 2020 2020HD 1616 1212 0808 0406 4 .310 (7.87) .250 (6.35) .135 (3.43) .103 (2.62) .071 (1.80) .054 (1.37) 7.5 7.5 7.5 3.0 5.0 2.0 110 Crimp Contacts Part Number Contact Size Contact Size Wire Size Insulation (0.D.) Limits Inch (mm) Max. Test Current per MIL-C-39029 Table VI Max. Current for Tests (Amps) (Mil-C-39029) DPX MA Commercial DPX ME Commercial Crimp Tool Part Number Locator Part Number Insertion/ Extraction Tool (Part No.) Layout Usage DPX ME DPX MA Wire Accom.Type be purchased separately. The insertion/extraction tools listed are plastic type. Consult factory for more durable metal tools. Max. Potential Drop (Millivolts) at 25 C per MIL-C-39029 M22520/2-01 ARINC 404 DPX*MA/ME Contact and Termination Tooling Data - Commercial www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Electrical Data

DPXMA (LIF) Crimp Contacts DPXMA Thermocouple Contacts Contact Size and Part Numbers Part Number Size Pin Socket MIL Spec ITT Cannon MIL Spec MIL Spec ITT Cannon Se- lec tor# Tool P/N Locator P/N ITT Cannon Insertion E xtraction I ns./Ext. AWG Insul Dia. Max. Strip Length Crimp Tooling Insertion/ Extraction Tooling Wire Size Contact Size and Part Numbers Part Number Size Pin Socket MIL Spec ITT Cannon MIL Spec MIL Spec ITT Cannon Se- lec tor# Tool P/N Locator P/N ITT Cannon Insertion E xtraction I ns./Ext. AWG Insul Dia. Max. Strip Length Crimp Tooling Insertion/ Extraction Tooling Wire Size DPXA DPXB Two (2) pieces, solder pot. LITTLE CAESAR rear release contact retention assembly, crimp pot. LITTLE CAESAR assembly, solder pot, LITTLE CAESAR rear release contact retention assembly, crimp pot, with separator. Ring-Loc, solder pot, Environmental, connector. Two (2) pieces, solder pot (Standard 2 pieces insert). Ring-Loc, solder pot. (See MS) (MAS) LITTLE CAESAR assembly, Solder pot. 222 030-2259-000 030-2273-000 030-2280-000 030-2286-000 031-1287-000 M22520 /2-01 M22520 2-23 M81969 /1-01 CIT-DPXMA-22-1 Metal (070256-0000) CET-DPXMA-22 Metal (070317-0000) (980-0004-804) Metal Tip .054 (1.37) .130/.110 (3.30/2.54) .167/.147 (4.24/3.73) .270/.230 (6.86/5.84) .270/.230 (6.86/5.84) .071 (1.80) .103 (2.62) .135 (3.43) (980-0004-805) Metal Tip (980-0004-806) Metal Tip CIET-12 Plastic (274-7003-000) CET-16-9 Plastic (323-7001-000) CET-12-4 Plastic (323-7002-000) M81969 /1-02 M81969 /1-03 M81969 /14-04 995-0002 -015 995-0001 -604 995-0001 -736 995-0002 -027 M22520 /2-08 M22520 /1-02 M22520 /1-11 995-0001 -584 995-0001 -584 995-0001 -585 995-0001 -585 M22520 /2-01 M22520 1-01 M22520 1-01 031-1302-000 031-1303-000 031-1308-000 2020HD 1616 1212 2222 Alumel 030-1975-009 031-1113-009 M22520 /2-01 995-0001 -584 M22520 /2-23 995-0002 -015 (980-0004-804) Metal Tip .054 (1.37) .130/110 (3.30/2.54) M81969 /1-01 CIT-DPXMA-22-1 Metal (070256-0000) CET-DPXMA-22 Metal (070317-0000) 4031-1113-010030-1975-010 2222 Chromel (MA) LITTLE CAESAR assembly, crimp pot, (Cat. A) Metal plates. Rear release, crimp (MB type only). Standard 2 pieces, solder pot, both sides, Ex: DPX2-57S57S-33-0001 Standard LITTLE CAESAR asembly, crimp pot both sides Ring-loc coax. EX:DPX2MA-57S57S-33-0001 LITTLE CAESAR assembly, soler po, both sides Ring-Loc coax. EX: DPX2MAS-57S57S-33-001 Ring-Loc, solder pot. Layout 25C3 pin only and 40C1 Pin and socket. EX: DPX2MS-40W1S40W1S-33-0001 A side: (MAS) LITTLE CAESAR assembly, solder pot (32W2S) B side; Standard 2 Piece, solder pot (57S). Ex: DPX2CA-32W2S57S-33-0001 A side: Standard solder pot. B side: Rear release crimp with separator. Ex: DPX2AF-13S26S-33B-0001 A side: Ring-Loc solder pot (40W1S). B Side: 2 Piece, Solder Pot (57S). Ex: DPX2BA-40W1S57S-33-0001 A side: (MA) LITTLE CAESAR assembly, Crimp (67S). B Side: 2 Piece, solder pot (57S). Ex: DPX3DA-67S57S-33-0001 A side: Metal plates for grounding (Coaxes). B side: Ring-Loc, solder pot. Ex: DPX2EB-C1P40W1P-34B-0001 DPXAMA DPXBMA *NOTE: When any two of these letters are used in combination, the inserts ("A" and "B") side have the style contacts indicated (see table opposite for examples). Class None D * DPX2CA-/ DPX2AC- (Reverse CA) DPX2AF DPX2BA DPX2DA DPX2EB DPX2- DPX2MA DPX2MAS DPX2MS- MA MAS MB MS ME Series DPX Insert T ype Class Series DPX Insert T ype Class Series DPX Insert T ype ARINC 404 DPX*MA/ME Description of Modification Codes for Special Connector Insert Assemblies www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Contact and Termination Tooling Data

A B C D I J K L M N O Part Number Pin 249-0672-000 .209 (5.31) .209 (5.31) .106 (2.69) DIA. .125 (3.18) DIA. .149 (3.78) DIA. .579 (14.71) .250 (6.35) DIA. .735 (18.67) .127 (3.23) DIA. .616 (15.65) .085 (2.16) DIA. .117 (2.97) .181 (4.60) .237 (6.02) 4.58 (11.63) * These coaxial contacts are supplied with the connector. .209 (5.31) .209 (5.31) .067 (1.70) DIA. 249-0671-000 RG-187/U RG-188/U C7A, B16C3, G25C3, C30C4, A32C2, L40C1 C7B, J25C3, C16C3, C32C2, 40C1 C7H, G16C3, F25C3, D32C2, F40C1 C7J, H16C3, H25C3, F32C2, E30C4, E40C1 10C3 A10C3 25C3, 32C2, J16C3, A40C1, C7, C7D A40C1 pin only, use C40C1 for socket. See Note 1 See Note 2 RG-180/U RG-195/U RG-55/U RG-58/U RG-223/U RG-55/U RG-58/U RG-223/U RG-187/U RG-188/U 7.5 amp #20 wire 13 amp #16 wire 23 amp #12 wire RG-59/U RG-7/U 249-0703-000 249-0750-000 249-0518-000 249-0353-000 249-0268-000 249-0591-000 024-0015-000 253-0120-000 330-0145-000 031-0016-008 031-0059-008 249-0702-000 249-0749-000 249-0365-000 249-0257-000 249-0583-000 024-0015-000 253-0120-000 330-0144-000 030-0056-010 030-0017-015 Socket Cable Accommodation Layout Accommodation ARINC 404 DPX Solder Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Rear Extension from insulator Contact type code R Z AA AB AC NOTES: 1. Code L-10C3, A10C3,17, 23, 25C3, E25C3, F25C3, G25C3. H25C3,J25C3, Q25C3, R125C3, 30C4, A30C4, C30C4, D30C4, E30C4, 32, 32C2, A32C2, C32C2, 032C2, F32C2, M32C2, N32C2, Q32C2, 40, 40C1, B40C1, D40C1, E40C1, F40C1, H40C1, J40C1, K40C1, L40C1, 45, 57, 67, 2. Code M-B16C3, C16C3, G16C3, H16C3, M16C3, ZE16C3, ZF16C3, 26, 30C4, 32, 67 Code Letter A B C D E I J K Z AA AB AC R A .166/.146 .166/.146 .166/.146 .166/.146 .166/.146 .166/.146 .166/.146 .198/.178 .08 .11 .238/.198 .345/.281 .238/.198 Inches 1.250 APP. (31.75) .440 (11.18) DIA .206 (5.23) DIA. .768 (19.51) .364 .040 (1.02) DIA. .750 APPROX. (19.05) .224 (5.69) DIA. 1.250 APPROX. (31.75) .438 (11.13) DIA. B A C INNER CONDUCTOR DIELECTRIC BRAID JACKET .140 (3.56) DIA. Millimeters B .358/.318 .358/.318 .358/.318 .358/.318 .358/.318 .39 .55 .488/.428 .41 .23 .233/.193 .516/.484 .233/.193 C .14 .14 .14 .14 .14 .166/.146 .166/.146 .25 .23 .195/.175 .447/.427 .359/.296 .582/.542 A 4.22/3.71 4.22/3.71 4.22/3.71 4.22/3.71 4.22/3.71 4.22/3.71 4.22/3.71 5.03/4.52 2.03 2.79 6.04/5.03 8.71/7.14 6.05/5.03 B 9.08/8.08 9.08/8.08 9.08/8.08 9.08/8.08 9.08/8.08 9.91 13.97 11.38/10.87 10.41 5.84 5.92/4.90 13.1/12.3 5.92/4.90 C 3.55 3.55 3.55 3.55 3.55 4.21/3.71 4.21/3.71 6.35 5.84 4.95/4.45 11.35/10.89 9.12/7.52 14.8/13.8 Part Number Pin 249-1521-000 249-1624-000 249-1599-000 249-1554-000 Consult Factory 249-1522-000 249-1598-000 249-1622-000 249-1822-000 249-5027-001 RG-9/U, RG-214/U RG-58/U with Capitve Contact RG-196/U with Captive Contact RG-58/U RG-9/U RG-214/U C7AA, ZE16C3 Q25C3, A30C4 M32C2, J40C1 C7X, ZF16C3, R25C3, B30C4, N32C2, K40C1 C2C C2M Socket Cable Accommodation Layout Accommodation Suggested Cable Trim Dimensions

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change ITT Cannon recommends resistance soldering for all solder contacts, particularly for RF cable where excessive heat will damage the dielectric. Wires For Codes A, B, C, D, and E 1. Cut cable evenly. Trim to dimensions as shown on page 60. Care should be taken not to injure the conductor or dielectric. 2. Remove inner contact from coaxial assembly and solder it to inner conductor of cable. 3. Push inner contact back into coaxial assembly. 4. Pull outer conductor over coaxial shell, and solder. 5. Apply shrink sleeving after assembly. For Codes I and J 1. Cut cable evenly. Trim to dimensions as shown on page 60. Care should be taken not to injure the conductor or dielectric. 2. Comb braid, tin conductor and remove flux. 3. Remove solder pot cover. Insert cable and solder conductor to contact. The dielectric should butt against contact solder pot. 4. Replace solder pot cover and solder braid to ferrule. 5. Apply shrink sleeving after assembly. For Codes K 1. Cut cable evenly. Trim to dimensions as shown on page 60. Care should be taken not to injure the conductor or dielectric. 2. Unscrew cap and remove spacer and inner contact from coaxial assembly. 3. Push cable through center of cap and spacer. 4. Solder inner. contact to inner conductor of cable. 5. Push inner contact back into coaxial shell as- sembly and attach cap. 6. Separate outer conductor of cables into two pigtails 180˚apart. 7. Attach on pigtail to each end of cap strip and solder. 8. Apply shrink sleeving after assembly. For Codes Z and AA 1. Cut cable evenly. Trim to dimensions as shown on page 60. Care should be taken not to injure the conductor or dielectric. 2. Solder inner conductor to coaxial contact through side slot in coaxial with outer sleeve pushed back on cable. 3. Pull sleeve forward over braid and solder through holes in sleeve. 4. Solder sleeve to coaxial body. should be pre-tinned. Bushing, endbells, and junc- tion shells (where applicabe) must be slipped over wire bundles before soldering is started. Consult JACKET CAP SPACER INNER CONDUCTOR INNER CONTACT OUTER SLEEVE CONTACT REAR INSULATOR SHELL ASSY FRONT INSULATOR CAP STRIP OUTER CONDUCTOR OUTER CONDUCTOR COAXIAL SHELL INNER CONDUCTOR INNER CONTACT factory for types not shown. The mechanical steps in wiring coaxials described below.

NOTES: *P for pin; S for socket. A *RG-59/U RG-62/U P-249-1397-000 S-249-1398-000 P-249-1399-000 S-249-1400-000 P-249-1401-000 S-249-1402-000 P-249-1403-000 S-249-1404-000 P-249-1405-000 S-249-1406-000 P-249-1633-000 S-249-1634-000 Ring Loc .760 (19.30) CA58073 CCT-HX4-524 CCT-408M CCT-HX4-524 CCT-408M CCT-HX4-524 CCT-408M CA58073 CCT-HX3-156 CA58073 CCT-HX3-156 CCT-HX4-524 CCT-408M Solder Crimp CA58073 CET-C4 (038869-0004) CET-C4 (038869-0004) CET-C4 (038869-0004) CET-C8 (323-7011-000) CET-C8 (323-7011-000) CET-C8 (323-7011-000) CET-C8 (323-7011-000) CET-C8 (323-7011-000) .158 (4.01) .148 (3.76) .128 (3.25) .118 (3.00) .128 (3.25) .118 (3.00) .072 (1.83) .062 (1.57) .072 (1.83) .062 (1.57) .072 (1.83) .062 (1.57) .128 (3.25) .118 (3.00) .072 (1.83) .062 (1.57) .158 (4.01) .148 (3.76) .130 (3.30) .120 (3.05) .158 (4.01) .148 (3.76) .130 (3.30) .120 (3.05) .130 (3.30) .120 (3.05) .275 (6.53) .247 (6.27) .211 (5.36) .201 (5.10) .166 (4.22) .156 (3.96) .121 (3.07) .111 (2.82) .091 (2.31) .081 (2.06) .121 (3.07) .111 (2.82) .235 (5.97) .215 (5.46) .091 (2.31) .081 (2.06) .238 (6.04) .228 (5.79) .238 (6.04) .228 (5.79) .238 (6.04) .228 (5.79) .211 (5.36) .201 (5.10) .273 (6.93) .263 (6.68) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .775 (19.68) .592 (15.04) .592 (15.04) .592 (15.04) .592 (15.04) .500 (12.70) 798 (20.27) Ring Loc Ring Loc Ring Loc Ring Loc Ring Loc LITTLE CAESAR LITTLE CAESAR LITTLE CAESAR LITTLE CAESAR LITTLE CAESAR LITTLE CAESAR Ring Loc S-249-1608-000 P-249-1670-000 S-249-1671-000 P-249-1474-000 S-249-1471-000 P-249-1958-000 S-249-1959-000 P-249-1960-000 S-249-1961-000 P-249-1631-000 S-249-1632-000 P-249-1388-000 S-249-1390-000 *RG-58/U RG-174/U, RG-187/U RG-179/U, RG-188/U RG-174/U, RG-187/U RG-179/U, RG-188/U *RG-58/U with nylon braid over jacket *RG-180/U RG-195/U RG-178/U RG-196/U *RG-178/U RG-196/U RG-59/U RG-62/U RG-55/U RG-142/U RG-59/U RG-62/U RG-58/U RG-58/U B C D E H P R F S T G J B16W3 25W3 32W2 40W1 B16W3 25W3 32W2 40W1 32W4 32W4 32W4 32W4 W16W3 25W3 32W2 40W1 X Y DIA. Z DIA. X Y DIA. Z DIA. X Y DIA. Z DIA. X Y DIA. Z DIA. Arr. Used In Code Letter Cable Accommodation Contact Retention X Max. Y Dia. Z Dia. Extraction ToolPart Number* Crimp Tool Codes A, B, C, D, E, H, P, R Codes F, S, T *IMPORTANT: These coaxials can only be used in the DPX*MAS or DPX*MB Connector Series. Codes G Codes J 1. The "X" dimension is take from the rear of the shell. 2. Codes G and S are inactive for new design. Use codes AD and AE. 3. Code AA is designed for installations that have limited space in the terminal area. Use code AG for standard installations. ARINC 404 DPX*MA Crimp Coaxial Contacts www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

K L U V AC AA AB AD AE AF AG CODE L CODE U CODE V, AC CODE AA, AB, AD, AE, AF, AG Arr. Used In Code Letter Cable Accommodation Contact Retention X Max. Y Dia. Z Dia. Extraction ToolPart Number* Crimp Tool X Y DIA. Z DIA. X Y DIA. Z DIA. .500 (12.70) X X Y DIA. Y DIA. Z DIA. Z DIA. X Y DIA. Z DIA. B16W3 25W3 32W2 40W1 B16W3 25W3 32W2 40W1 10W3 32W4 RG-178/U RG-196/U P-249-1384-000 S-249-1413-000 Ring Loc Ring Loc LITTLE CAESAR LITTLE CAESAR LITTLE CAESAR LITTLE CAESAR LITTLE CAESAR .575 (14.60) .260 (6.60) .800 (20.32) .800 (20.32) .425 (10.80) .518 (13.16) .906 (23.01) .045 (1.14) .035 (0.89) Solder Solder CET-C4 (038869-0004) CET-C4 (038869-0004) CET-C8 (038869-0004) CET 4-8 (323-7008-000) CET-C8 (323-7011-000) CCT-C10 Buchanan 612991 T & B #WT400 Daniels HX4-210 .098 (2.49) .088 (2.24) .098 (2.49) .088 (2.24) .117 (2.97) .107 (2.72) .356 (9.04) .349 (8.86) .356 (9.04) .349 (8.86) .126 (3.20) .122 (3.10) .168 (4.27) .158 (4.01) .045 (1.14) .035 (0.89) .069 (1.75) .059 (1.50) .260 (6.60) .254 (6.45) .205 (5.21) .199 (5.05) .088 (2.24) .084 (2.13) .114 (2.90) .104 (2.64) P-249-1386-000 S-249-1414-000 S-249-1883-000 P-249-1956-000 S-249-1957-000 S-249-1977-000 P-249-1968-000 P-249-1982-000 S-249-1983-000 P-249-2017-000 S-249-2018-001 P-249-2019-001 S-249-2020-001 P-249-1633-004 S-249-1634-003 P-249-2061-000 S-249-2062-001 RG-178/U RG-196/U RG-178/U RG-196/U RG-180/U RG-195/U RG-178/U RG-196/U RG-174/U, RG-187/U RG-179/U, RG-188/U RG-174/U, RG-187/U RG-179/U, RG-188/U RG-115/U RG-58/U RG-58/U RG-142/U ARINC 404 DPX*MA Crimp Coaxial Contacts www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

ARINC 404 DPX*ME Crimp DPX*MA/ME Coaxial Contact Data (for environmental requirements) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Components/Accessories RING TYPE RETENTION (A32W2 & A40W1 CONTACT ARRANGEMENTS) Coaxial Contact Assembly Recommendations (For Codes A, B, C, D, E, J, K, L and P) Part Number* Without Seal (MA) Sealed (ME) Seal 1 Seal 2 Ins. Dia. Size/Max. 'A' Trim Dim. Crimp Tool Cable Trim Dimensions WITHOUT SEAL SEALED Cable Accommodation NOTE: 32W2 (MA Version) A32W2 (ME Version) 123456 123456 89101112 89101112 141516 141516 1718 1718 1920 2122 2122 2526272829 2526272829 3031 3233343536373839 40W1 (MA Version) A40W1 (ME Version) .420 (10.67) .400 (10.16) A (For Codes A, B, C, D, E, J, K, L and P) SOCKET PIN SOCKET PIN BUSHING BUSHING SEAL SEAL 2 SEAL 1 .330 (8.38) .310 (7.86) P-249-1397-001 S-249-1398-003 P-249-1399-001 S-249-1400-003 P-249-1401-001 S-249-1402-003 P-249-1403-001 S-249-1404-003 P-249-1405-001 S-249-1406-003 *P for pin, S for socket †Unsealed accomodates both Seal 1 & Seal 2 Cables. ††For use with connectors supplied less grommet ( Code 29**, etc.) 1. Center contact, rear insulator, crimp ring, support bushing and seal sleeve are packaged separately and shipped with the coaxial assembly. 3. Cable Assembly Instructions 4. To extract coaxial, push back seal sleeve and support bushing. Then push out coaxial from engaging end with CET-C4 (038869-0004) impact tool. 5. When crimping with CA58073 crimp tool, care should be taken to avoid flaring the front end of the crimp ring. Place Crimp jaw so that the second tooth of the indentors is over the end of the crimp ring. 6. To facilitate extraction of contacts and avoid splaying the length of free cable adjacent to the rear surface of the connector should not be less then 2.000 (50.80). Step 1- If applicable, determine which portion of seal sleeve should be used. If seal 2 is used, cut off seal 1 portion Step 2 - In sequence, place seal sleeve, support bushing and crimp ring over cable jacket. Step 3 - Trim cable per illustration. Step 4 - Place rear insulator over dielectric. Step 5 - Solder innerconductor to center contact. Step 6 - Insert soldered cable firmly into coaxial with shielding over coaxial shell. Step 7 - Pull crimp ring forward until stopped and crimped. Step 8 - Insert coaxial assembly into connector until engaged. Push support bushing into grommet until shoulder rest on tublular extension. Then pull seal sleeve forward until it is snug against grommet. P-249-1397-002 S-249-1398-002 P-249-1399-002 S-249-1400-002 P-249-1401-002 S-249-1402-002 P-249-1403-002 S-249-1404-002 P-249-1405-002 S-249-1406-002 X RG58B RG195 RG179B RG179B, RG196 RG59B, RG62A X RG180B RG174, RG179B, RG316 X .249 (6.32) .200 (5.08) .158 (4.01)] .113 (2.87) .083 (2.11) .435 (11.05) .415 (10.54) .460 (11.68) .440 (11.18) .460 (11.68) .440 (11.18) .460 (11.68) .440 (11.18) .480 (12.19) .460 (11.68) CA58073 CA58073 CA58073 CCT-406M CCT-406M The A32W2 & A40W1 (Ring Type Retention); AW8 & A32W4 (LITTLE CAESAR Renention) Coaxial Contact arrangements have been redesigned to provide ease of insertion/removal of the coaxial contacts. Sealing is accomplished with the addiction of sealing sleeves provided with the coaxial contact assembly.

LITTLE CAESAR® CONTACT RETENTION (A32W4 & AW8 CONTACT ARRANGEMENTS) Coaxial Contact Assembly and Extraction Recommendations WITHOUT SEAL Cable Trim Dimensions SEALED Part Number* Without Seal†† (MA) Sealed (ME) Seal 1 Seal 2 Ins. Dia. Size/Max. 'A' Trim Dim. Cable Accommodation† 32W4 (MA Version) A32W4 (ME Version) 1 12 10 8 24 22 29303132 W8 (MA Version) AW8 (ME Version) P-249-1633-004 S-249-1634-003 P-249-1982-000 S-249-1983-000 P-249-2017-001 S-249-2018-001 P-249-2019-001 S-249-2020-001 P-249-2061-001 S-249-2062-001 1. Use Crimp Tool No. DIE Y211 (995-0002-249), Tool M22520 / 5-01 (995- 0001-761). 2. Use extraction tool No. CET-C8. An insertion tool is not required. (See Note 5). 3. Center contact, rear insulator, crimp ring, support bushing (not applicable to RG58/RG142 coaxials), seal sleeve, front insulator, shell and ferrule are shipped unassembled in a common container. 4. Cable Assembly Instructions: Step 1 - If applicable, determine which portion of seal sleeve should be used. If seal 2 is used, cut off seal 1 portion. Step 2 - In sequence, place seal sleeve, support bushing and crimp ring over cable jacket. Step 3 - Trim cable per illustration. Step 4 - Comb out braid and flare out ends to permit entry of ferrule. Step 5 - Complete termination per illustration. (See below) 5. To extract: coaxial, push back seal sleeve and support bushing. Slip cable into ex- traction tool. Push tool into insert until it contacts coaxial retaining shoulder. Grip both cable and tool with one hand and pull coaxial rearward out of insert cavity. 6. To facilitate extraction of contacts and avoid splaying, the length of free cable adjacent to the rear surface of the connector should not be less than 2.000 (50.80). A. Carefully push inner conductor through rear insulator. B. While holding rear insulator firmly against ferrule, trim conductor to .156 (3.96)/.146 (3.71) dimension. C. Place contact over conductor and solder. .035 (0.89) .030 (0.76) .156 (3.96) .146 (3.71) FERRULE BRAID CONTACT REAR INSULATOR CRIMP AREA FRONT INSULATOR COAXIAL SHELL .350 (8.89) APPROX. A. Push ferrule under braid as far as it will go. Trim off braid extending beyond shoulder of ferrule, if necessary. B. While holding ferrule in place pull crimp sleeve forward over braid until it is tight against shoulder an ferrule. Pull firmly against face of ferrule to make sure it is up tight. A. Place front insulator over contact and then push assembly into coaxial shell. B. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp sleeve. Press sleeve firmly into coaxial shell and crimp. C. After assembled coaxial is inserted into connector, push support bushing into grommet until shoulder rests on tubular extension. Then pull sealing sleeve forward until it is snug on grommet. SOCKET SOCKET BUSHING BUSHING SEAL SEAL 1 SEAL 2 PIN PIN SOCKET .610 (15.49) .590 (14.99) A PIN *P for Pin. S for Socket Unsealed accommodates both Seal 1 & Seal 2 cables. For use with connector supplied less grommet (Code-29**, etc.). P-249-1633-003 S-249-1634-002 P-249-1982-001 S-249-1983-001 P-249-2017-000 S-249-2018-000 P-249-2019-000 S-249-2020-000 P-249-2061-000 S-249-2062-000 RG179 RG180B RG58C RG142B RG178B RG174, RG316, RG179B RG195 X X X .111 (2.82) .158 (8.89) .196(4.98) .196 (4.98) .075 (1.90) .350 (8.89) .330 (8.38) .260 (6.60) .250 (6.35) .260 (6.60) .250 (6.35) .260 (6.60) .250 (6.35) .260 (6.60) .250 (6.35) ARINC 404 DPX*ME Crimp DPX*MA/ME Coaxial Contact Data (for environmental requirements) www.ittcannon.com

ARINC 404 DPX*MA Crimp Coaxial Cable Assembly Recommendations www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change LITTLE CAESAR Contact Assembly Data For Codes G, H and R For Codes F, S and T 1. Strip and trim cable as shown on page 60. 2. Solder inner conductor to coaxial contact with crimp ring over braid and rear insulator over inner conductor. 3. Insert cable into coaxial with shell under braid. Crimp ring with Cannon crimp tool CA58073. 1. Strip and trim cable as shown on page 60. 2. Solder inner connector to coaxial contact with crimp ring pushed back on cable. 3. Insert cable into coaxial and pull ring forward over braid. Crimp ring with Cannon crimp tool CA58073-0001 or CCT-408M. After crimping, crimp ring must not exceed .252 (6.40) diameter. 1. Strip and trim cable as shown on page 60. 2. Slide crimp ring over braid and jacket of cable. 3. Unbraid exposed portion of braid and fold braid wires backward over outside of crimp ring. 4. Insert prepared wire into right angle fitting of shell assembly. Conductor should be aligned in slot of the center contact. Crimp with Cannon tool CCT/C10. 5. Solder center conductor of cable to contact. Insert cap and solder in place. 2. Bend up combed out braid at right angles to cable. Slide ferrule up to bend and fold braid back against ferrule. 3. Slide rear insulator over dielectric as shown. Press insulator firmly against folded back braid and trim dielectric flush with insulator. Then cut inner conductor to length shown. 4. Place contact over conductor. Press contact and insulator firmly against braid and solder contact to conductor. 5. Push cable assembly into shell, pressing against rear of ferrule and crimp area shown with T. & B. #WT-400 Crimp Tool while making sure parts do not move out of place. against jacket, and comb out exposed portion of braid. and slide rear insulator over dielectric until it presses against braid. contact over conductor and crimp with MS3191-3 (do not use MS3191-1). Press parts firmly against locator during crimping operation. 4. Place front insulator over contact. Push parts into coaxia! shell. While holding parts firmly against stop shoulder in coaxial shell, place jaw of crimp tool at back end of shell and crimp. Use Buchanan crimp tool #612991 (.343 [8.71) across hex]. FERRULE CRIMP AREA SHELL CONTACT REAR INSULATOR JACKET FERRULE DIELECTRIC JACKET COAXIAL SHELL REAR INSULATOR CONTACT FRONT INSULATOR .400 APPROX. (10-16) .680 (17.27) .660 (16.76) .198 (5.03) .034 DIA. (0.86) .156 (3.96) .136 (3.45) .250 (6.35) .230 (5.84) .070 (1.78) .060 (1.52) .247 (6.27) .237 (6.02) .070 (1.78) MAX. For Codes U For Codes AA For Codes AC

ARINC 404 DPX*MA Crimp Coaxial Cable Assembly Recommendations (Continued) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change For Code V 1. Trim cable to dimensions shown below. A. Push ferrule under braid as far as it will go and press braid down tightly around ferrule. B. Solder ends of braid to ferrule by applying a small amount of solder. Avoid excess solder as it would cause braid to swell up. 3. A. Place rear insulator over dielectric and conductor into contact. B. Solder contact to conductor through access hole. C. Remove excess solder from outside of contact. 4. A. Place front insulator over contact. B. Push parts into coaxial shell. C. While holding parts firmly against stop shoulder in coaxial shell, place jaw of crimp tool at back end of shell and crimp, use Buchanan crimp tool #612991 [.343 (8.71) across hex]. For Codes AB, AD, AE, AF and AG Setp 1 - Trim cable as shown. Step 2 - Flare out ends of braid to permit entry of ferrule. Step 3 - Complete termination per instructions as shown below. a. Push ferrule under braid as far as it will go. Trim off braid extending beyond shoulder of ferrul, if necessary. b. While holding ferrule in place pull crimp sleeve forward over braid until it is tight against shoulder on ferrule. Push firmly against face of ferrule to make sure it is up tight. d. Carefully push inner conductor through rear insulator. dimension. f. Place contact over conductor and solder. g. Place front insulator over contact and then push assembly into coaxial shell. h. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp sleeve. Press Sleeve firmly into coaxial shell and crimp. Use Daniels crimp tool HX4-210. Code Letter A B, C, D & P E F G H & R J K L S U V T AA, AC AB, AD, AE, AF, AG .420/.400 .420/.400 .420/.400 .785/.745 .490/.470 .581/.561 .326/.306 .410/.390 .385/.365 .678/.658 .940/.920 .550/.540 .598/.578 .432/.415 .460/.440 .480/.460 .275/.255 .275/.255 .345/.325 .250/.230 .290/.270 .244/.224 .275/.255 .760/.740 .415/.405 .300/.280 .330/.310 .330/.310 .330/.310 .228/.208 .156/.136 .156/.136 .088/.068 .088/.068 .074/.064 .156/.136 .080/.060 .250/.240 .228/.208 See page 60 for dimensions See page 60 for dimensions .10.67/10.16 10.67/10.16 10.67/10.16 19.94/18.92 12.45/11.94 14.76/14.25 8.28/7.77 10.41/9.91 9.78/9.27 17.22/16.71 23.88/23.37 13.97/13.72 15.19/14.68 11.05/10.54 11.68/11.18 12.19/11.68 6.98/6.48 6.98/6.48 8.76/8.26 6.35/5.84 7.37/6.86 6.20/5.69 6.98/6.48 19.30/18.80 10.54/10.29 7.62/7.11 8.38/7.87 8.38/7.87 8.38/7.87 5.79/5.28 3.96/3.45 3.96/3.45 2.24/1.73 2.24/1.73 1.88/1.63 3.96/3.45 2.03/1.52 6.35/6.10 5.79/5.28 INNER CONDUCTOR CRIMP AREA REAR INSULATOR CONTACT Crimp Sleeve .400 APPROX. (10.16) FRONT INSULATOR 0.75 MAX. (1.90) .349 DIA. MAX (8.86) SOLDER ALL AROUND FERRULE FERRULE .156 (3.96) .146 (3.71) .035 (0.89) .030 (0.76) .260 (6.60) .250 (6.35) .610 (15.49) .590 (14.99) FRONT INSULATOR COAXIAL SHELL .350 APPROX (8.89) DIELECTRIC BRAID JACKET C A B Inches Millimeters AB C AB C Cable Trim Dimensions

• 5. 4-40 clinch nuts. - 6. Removable insert retainer plate. -16. A106 insert with separator. -70. Standard mounting with (LIF) contacts. -77. Same as -7 except with low insertion force (LIF) contacts (for LIF contact data). DPXB and DPX2/3/4 Modification Codes Some of the modification numbers used in the DPX only certain types. The following chart gives the type in which they may be used (-33 is for plug lines apply to all types and some are applicable for modification number, the description, and the shell shells, -34 is for receptacle shells). DPX2-33 and 34 DPX2-33A DPX2-33F and 34F DPX2-33M and 34M DPX2-34A DPX2-33B DPXB-33 DPX3-33 DPX4-33 DPX2-34B DPXB-34 DPX3-34 DPX4-34 DPX2-33 and 34 DPX2-33A DPX2-34A DPX2-33F and 34F DPX2-33M-34M DPX2-34B/33B DPXB-34 DPX3-34 DPX4-34 DPX2-33 and 34 DPX2-33A DPX2-34A DPX2-33F and 34F DPX2-33M and 34M DPX2-33B and 34B DPXB-33 and 34 DPX3-33 and 34 DPX4-33 and 34 DPXBME-33 and 34 DPX2ME-33 and 34 DPX3ME-33 and 34 DPX4ME-33 and 34 DPX2-33 and 34 DPX2-33A DPX2-33F and 34F DPX2-33M and 34M DPXB-33 and 34 DPX3-33 and 34 DPX4-33 and 34 Standard construction, mounting holes .120 (3.05) dia. and with tabs for junction shells. Standard construction - six floating eyelets and tabs for junction shells, Standard construction, mounting holes .120 (3.05) dia. countersunk 82˚ to .230 (5.84) dia. - no tabs. Standard construction, mounting holes 120 (3.05) dia. - no tabs. Standard construction and with standard junction shells. With four #4-40 clinch nuts in mounting holes. With six #4-40 clinch nuts in mounting holes. With ten #440 clinch nuts in mounting holes. Standard construction and with 90˚junction shells. Standard construction and with tabs for attaching junction shells. Standard construction and with tabs for attaching junction shells. - 00** - 00 - 00 - 00 - 01 - 01 - 01 - 01 - 02 - 02 - 02 - 03 Modification DESCRIBES STANDARD CONNECTOR HOUSING #4-40 CLINCH NUTS #4-40 THREAD (2 TABS PER RETAINING PLATE) Applicable for all MA, ME, NA & NE Series Connectors. Applicable to NE Series also. MODIFICATION 00 MODIFICATION 01 MODIFICATION 02 ATTACHING TABS MODIFICATION 03 ALTERNATE STYLE Applicable Series Definition MOUNTING HOLES .120 (3.05) DIA. C'SUNK 100 TO .230 (5.84) DIA. ARINC 404 DPX Modifications Codes www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

Applicable Series Definition MOUNTING HOLES .120 (3.05) DIA. C'SUNK 100 TO .230 (5.84) DIA. MOUNTING HOLES .137 (3.48) DIA. C'SUNK 82 TO .230 (5.84) DIA. #4-40 THREAD MOUNTING SLOTS (4) .208 (5.28) MOUNTING SLOTS (4) .237 (6.02) (SEE PAGE 62 FOR JUNCTION SHELL CONFIGURATIONS #4-40 CLINCH NUTS #4-40 CLINCH NUTS #4-40 THREAD #4-40 THREAD ATTACHING TABS (2 PER RETAINING PLATE) ATTACHING TABS (2 PER RETAINING PLATE) Applicable for all MA, ME, NA & NE Series Connectors. - 04** DPX2-33B DPXB-33 DPX3-33 DPX4-33 DPX2-33 and 34 DPX2-33F and 34F DPX2-34B DPXB-34 DPX2-34B DPXB-34 DPX2-33B DPXB-33 DPX2-34B DPXB-34 DPX3-33 DPX3-34 DPX2-33B DPXB-33 DPX2-34B DPXB-34 DPX3-34 DPX4-34 DPX2-33B DPXB-33 DPX2-34B DPXB-34 DPX3-34 and tabs for attaching junction shells. With mounting slots .208 (5.28) wide. With mounting slots .237 (6.02) wide. With straight junction shelf. (Not available on DPX4) With four #4-40 clinch nuts in mounting holes and tabs for attaching junction shells. With six #4-40 clinch nuts in mounting holes and tabs far attaching junction shells. With ten #4-40 clinch nuts in mounting holes and tabs for attaching junction shells, With six #4-40 clinch nuts in mounting holes and tabs for attaching junction shells. - 08 - 12 - 13 - 14 - 17 - 17 - 17 - 18 ATTACHING TABS (2 PER RETAINING PLATE) ARINC 404 DPX Modifications Codes www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

#4-40 CLINCH NUTS SUPERSEDED BY 01 MOD. .037 MAX. (0.94) - 34 RECEPT. .014 (0.36) MAX.

4 PLACES

.255 (6.48) DIA. MAX. .255 (6.48) DIA. MAX. RIVET 4 REQD. FRONT FACE OF FLANGE - 33 PLUG .037 (0.94) MAX. .037 (0.94) MAX..019 (0.48) MIN .015 (0.38) MIN MOUNTING DIA. MODIFICATION 20 MODIFICATION 22 MODIFICATION 23 MODIFICATION 25 MODIFICATION 26 Applicable Series Definition - 19** DPX2-33B DPXB-33 DPX2-34B DPXB-34 DPX3-33 DPX3-34 (Same as Code -01) DPX2-33A DPX2-34A DPX2-33 and 34 DPX2-33A DPX2-33B DPXB-33 DPX2-33M and 34M DPX3-33 DPXBME, DPX2ME, DPX3ME, DPX4ME - 33 only DPX2-33F and 34F DPX2-33 and 34 DPX2-33A DPX2-33B DPXB-33 DPX2-34B DPXB-34 DPX3-33 and 34 DPX4-33 and 34 DPX2-33F and 34F DPX2-34A DPX2-33B DPX2-34B DPXB-34 DPX2-34B DPXB-34 DPX3-34 DPX2-34A DPXBME-34P & 33S DPX2ME-34P & 33S DPX3ME-34P & 33S DPX4ME-34P & 33S DPXBME-34P DPX2ME-34P DPX3ME-34P DPX4ME-34P DPXBME-34P DPX2ME-34P DPX3ME-34P DPX4ME-34P DPXBME-34P DPX2ME-34P DPX3ME-34P DPX4ME-34P DPXBME-34P DPX2ME-34P DPX3ME-34P DPX4ME-34P With six #4-40 clinch nuts in mounting holes. Do not assign - use -01 code Standard construction without tabs on insert retaining plate. With eight #4-40 clinch nuts in mounting holes. Same as 01. 01 Recommended With floating eyelets. With six mounting holes .208 (5.28) dia. (Foating eyelets omitted) and has tabs for attaching junction shells. With interfacial seal (if pins) without junction shell tabs and military gold plating on the contact. Standard except less grommet* * On the A106S layout the grommet is replaced by the separator. Standard except less grommet and with tabs for attaching junction shells. (-34 pin only) Standard except less grommet and with floating bushings. (Slatted shells). Standard except less grommet and with clinch nuts in mounting holes. Standard less grommet and with clinch nuts in mounting holes and with tabs for attaching junction shells. **Indicates polarizing position. (See page 72) - 20 - 22 - 23 - 24 - 25 - 26 - 29 - 29 - 30 - 31 - 33 - 37 Applicable for all MA, ME, NA and NE Series Connectors. MOUNTING DIA., C'SUNK 82 TO .230 (5.84) DIA. ARINC 404 DPX Modifications Codes www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

Two Post Type Face View of Engaging End Three Post Type DPX2-34A or 34B DPX3-33 DPX4-33 DPXB-33 DPXB-34 DPX2-33A or 33B DPX2-33F or 33M DPX2-34F or 34M ALTERNATE STYLE Applicable Series All DPX series with LITTLE CAESAR retention All DPX series with LITTLE CAESAR retention All DPX series with LITTLE CAESAR retention All DPX series with LITTLE CAESAR retention All DPX series with LITTLE CAESAR retention All DPX series with LITTLE CAESAR retention All DPX as listed for code -22 All DPXB series All DPX series with LITTLE CAESAR retention DPXB-33 & 34 DPX2-33B DPX2-34B DPX3-33 & 34 DPX4-33 & 34 - 39 FLOATING BUSHINGS #4-40 THREAD ATTACHING TABS (2 PER RETAINING PLATE) LEFT POST COUPLING MECHANISM RIGHT POST BA BA POT A POT B TOP TOP TOP TOP AB LEFT POST COUPLING MECHANISM RIGHT POST LEFT POST CENTER POST RIGHT POST LEFT POST CENTER POST RIGHT POST LEFT POST OR KEY CENTER POST OR KEY RIGHT POST OR KEY LEFT POST CENTER POST RIGHT POST LEFT POST CENTER POST RIGHT POST LEFT POST CENTER POST RIGHT POST - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 Applicable for all MA, ME, NA and NE Series Connectors. Applicable for NE Series Also. Indicates polarizing position. (See page 72) The -7* and 8*** Modification Codes are reserved for connectors which have Low Insertion Force (LIF) Contacts. The LIF design is not applicable to thermocouple contacts, coaxial contacts and contacts larger than size 8 and Standard size 20 With floating eylets & tabs for attaching junction shells. Definition Same as -00 with addition of LIF contacts See Contact Section Page 54 Same as -31 with addition of LIF contacts See Contact Section Page 54 Same as -01 with addition of LIF contacts See Contact Section Page 54 Same as -23 with addition of LIF contacts See Contact Section Page 54 Same as -33 with addition of LIF contacts See Contact Section Page 54 Same as -02 with addition of LIF contacts See Contact Section Page 54 Same as -22 with addition of LIF contacts Mounting holes .120 (3.05) dia. countersunk 82 to .230 (5.84) dia. and has LIF contacts. Same as -29 with addition of LIF contacts ARINC 404 DPX Modifications Codes www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Polarization

The last two digits in the DPX nomenclature (ex: DPXB-8-33B-0014) refer to the polarizing post position. When the last two digits are omitted it means the polarizing posts will not be assembled and position number is not stamped on the connector. This allows the customer to position the posts themselves and then stamp the appropriate number on the shell. If the last two digits are made 00 it means the polarizing posts are deleted. Positions Two Post Type Position Position Left Post Left Post Center Post Right Post Position Left Post Center Post Right Post Position Left Post Center Post Right Post Position Left Post Center Post Right Post Right Post Position Left Post Right Post P osition L eft Post R ight Post P osition L eft Post R ight Post Three Post Type PLUG SHELL

33 PLUG MALE SHELL

34 RECEPTACLE FEMALE SHELL

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

1.781 (45.24) .125 (3.15) RAD. TYP. .750 (19.05) .120 (3.05) DIA. .120 (3.05) DIA. 4 HOLES .120 (3.05) DIA. 2.062 (52.38) 1.437 (36.50) 1.437 (36.50) 1.720 (43.70) 1.720 (43.70) .720 (18.29) .720 (18.29) .580 (14.73) 1.440 (3.66) .260 (6.60)1.25 (3.18) 1.78 (4.52) 1.350 (34.30) .561 (14.25) .125 R. TYP. (3.18) - 33 Front Mount - 33 Rear Mount - 34 Rear Mount - 34 Front Mount 1.720 (43.69) OF INSERT .718 (18.24) .718 (18.24) CL OF INSERTCLCLCL 1.140 (28.96) WHEN USING THE -2301 FLOATING EYELET MODIFICATION, ADD .050 (1.27) TO THE CUTOUT SIZE TO ALLOW FOR FLOAT (EXCEPTION -34A) ARINC 404 DPX Panel Cutouts www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change All tolerances are +_ .015 (0.38) unless otherwise noted. 2.062 (52.38) .750 TYP. (19.05) .469 TYP. (11.91) 1.031 (26.16) .120 (3.05) DIA.

8 HOLES

2.800 (71.10) 1.720 (43.70) 1.720 (43.70) 1.391 (35.33) 1.391 (35.33) 1.391 (35.33) 1.391 (35.33) 1.630 (41.40) 1.160 (29.46) .120 (3.05)

6 HOLES

.120 (3.05) DIA. .120 (3.05) DIA. 4 HOLES.120 (3.05) DIA. 1.890 (48.00) 2.350 (59.69) .718 (18.24) .718 (18.24) .718 (18.24) .718 (18.24) 2.783 (70.69) 2.783 (70.69) 2.783 (70.69) 1.391 (35.33) 2.783 (70.69) 2.783 (70.69) 1.780 (45.21) 1.780 (45.21) 1.970 (50.04) 2.500 (63.50) 2.500 (63.50)2.550 (64.77) .156 R. TYP. (3.96)1.830 (46.48) .156 R. TYP. (3.96) .120 (3.05) DIA. 6 HOLES OMIT CENTER HOLES FOR - 33B 2.460 (62.50) .718 (18.24) 1.437 (36.50) 1.437 (36.50) 1.437 (36.50) 1.437 (36.50) 1.437 (36.50) .125 R. TYP. (3.18) .125 R. TYP. (3.18) 2.062 (52.38) 1.031 (26.16) .120 (3.05) DIA. .750 TYP (19.05) .469 TYP. (11.91) 1.630 (41.40) 2.230 (56.60) 2.700 (68.60) .156 R. TYP. (3.96) .750 TYP. (19.05) .469 TYP. (11.91) 1.780 (45.20) 2.840 (72.10) .120 (3.05) DIA 8 HOLES1.031 (26.19) 2.062 (52.38) DPX2 - 33 FRONT MOUNT - 33A & -33B FRONT MOUNT - 34A REAR MOUNT (-34A FRONT MOUNT CONSULT FACTORY) - 33B REAR MOUNT - 33B REAR MOUNT - 33A REAR MOUNG - 34B FRONT MOUNT - 33 REAR MOUNT - 34 FRONT OR REAR MOUNT CL CLCL CL CL CL CL CL CL CL CL CL CL CLCL 1.160 (29.50) 1.260 (32.00)

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change All tolerances are +_ .015 (0.38) unless otherwise noted. .120 (3.05) DIA. .120 (3.05) DIA. 1.780 (45.21) 3.640 (92.46) 3.120 (79.25) 2.500 (63.50)2.500 (63.50) 1.980 (50.29) 1.648 (41.86) 1.648 (41.86) 2.783 (70.69) 2.783 (70.69) 1.391 (32.33) 3.770 (95.76) .125 R. TYP. (3.18).930 (23.62) 1.391 (35.33)

10 HOLES

.120 (3.05) DIA. 1.780 (45.21) 1.437 (36.50) 1.437 (36.50) .718 (18.24) .718 (18.24) .125 R. TYP. (3.18) 3.740 (95.00) 3.740 (95.00) 2.013 (51.13) 2.013 (51.13) 4.026 (102.26) 4.026 (102.26) 1.260 (30.00) 3.220 (81.79) DPX3 DPX4 FRONT MOUNT REAR MOUNT FRONT MOUNT REAR MOUNT CL CLCL CL CL

Material: Teflon (All others thermoplastic) Part Number A A A A C C C C B B B B 225-1013-000 225-0070-000 225-0071-000 225-0072-000 225-0090-000 #5 and #9 Coax Black Red Blue Yellow White .063 (1.6) .085 (2.2) .115 (2.9) .171 (4.3) .365 (9.3) .040 (1.0) .065 (1.6) .075 (1.9) .121 (3.1) .287 (7.3) .469 (11.9) .469 (11.9) .469 (11.9) .564 (14.3) .835 (21.2) Contact Size Color A B C Part Number 225-0094-000 225-0095-000 225-0096-000 225-0097-000 225-0098-000 225-0099-000 #5 Coax (Pin) #5 and #9 Coax (Socket) White White .275 (7.0) .275 (7.0) .251 (6.4) .251 (6.4) .450 (11.4) 1.061 (26.9) Black Red Blue Yellow .069 (1.7) .083 (2.1) .131 (3.3) .187 (4.7) .051 (1.3) .069 (1.7) .108 (2.7) .156 (4.0) .420 (10.7) .350 (8.9) .320 (8.1) .320 (8.1) Contact Size Color A B C Material: Teflon (All others thermoplastic) ARINC 404 DPX Crimp Sealing Plugs - DPX*ME (for environmental requirements) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Filler Plugs - DPX*

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change (DPXA ONLY) DIECAST STRAIGHT JUNCTION SHELL Style (Right) DPXA (Left) DPXA (Right) DPX2 (Left) DPX2 1.281 (32.54) 1.781 (45.24) 1.375 (34.93) .781 (19.84) 1.156 (29.36) CABLE ENTRY 2.312 (58.72) 2.312 (58.72) 1.156 (29.36) 1.062 (26.98) .837 (21.26) CABLE ENTRY 1.938 APPROX. (49.23) 1.282 (32.56) 1.782 (45.26) 1.157 (29.39) 2.500 (63.50) 2.468 (62.69) 1.906 (48.41) CABLE ENTRY .932 (23.67) 1.406 (35.71) 1.281 (32.54) CLINCH NUTS .406 APPROX. (10.31) 1.156 (29.36) 1.875 +_ .031 (47.63 +_ 0.79) 2.406 (61.11) 1.843 (46.81) .937 (23.80) 1.906 (48.41) 1.906 (48.41) CABLE ENTRY 3.406 (86.51) 2.843 (72.21) .812 (20.62) .125 R. TYP. (3.18) .187 R. TYP. (4.75) 1.281 (32.54) 1.406 (35.71) .125 R. TYP. (3.18) .187 R. TYP. (4.75) 1.281 (32.54) 1.406 (35.71) 2.437 (61.90) APPROX. Part Number 20745-22 20745-23 20745-10 20745-11 Style DPX2 Part Number 20745-12 Style DPXA DPX2 * DPX2 Junction Shells are also used on DPXB connectors. Diecast junction shells may be used on DPXA connectors. They have 4-40 NC-2B tapped mounting holes for attaching to the shell mounting hardware. Conductive DPXB-60-1 for 34 Shell Conductive Dust Caps 025-0767-001 Protect Against Static Electricity Conductive DPXA-59 for 33 Shells 025-0749-001 3334 Part Number 20745-21 20745-8 Style DPXA Part Number 22017 Style DPXA Part Number 22017-2 Style DPXA Part Number 22017-1 (DPXA ONLY) DIECAST STRAIGHT JUNCTION SHELL STRAIGHT JUNCTION SHELL

90 Angle

90 ANGLE DPX2

JUNCTION SHELL (SIDE OUTLET) (DPXA ONLY) DIECAST 90 ANGLE JUNCTION SHELL Dust Caps

Coaxial Cable Reference Guide www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change For BKA* DPX Series (Crimp, & Solder) Refernece MIL-C-17D & DPX NE/NA MIL-C-81659 Series RG/U Type 59B 62A 115 142 142B 174 178 179 179B 180 180B 187 188 195 196 214 223 225 316 393 400 402 Inner Conductor 0.0359 " 0.0855" 0.0320 " 0.0320"BC 0.0253 " 0.0230" 0.0253" 0.0253" 0.0253" 0.0840" 0.0359" 0.0390" 0.0189" 0.0120" 0.0120 " 0.0120" 0.0120" 0.0120" 0.0120" 0.0201" 0.0120" 0.0120' 0.0888" 0.035 " 0.0936" 0.0201 0.0936" 0.0385" 0.0360" Dielectric Material Air-space PE PE PE PE PE PE Air-space PE Air-space PE Air-space PE PTFE PTFE PTFE PE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PE pE PTFE PTFE PTFE PTFE PTFE DOD (Inch) 0.250 0.280 0.116 0.116 0.146 0.146 0.146 0.146 0.146 0.250 0.116 0.116 0.060 0.036 0,057 0.063 0.103 0.102 0.060 0.060 0.102 0.034 0.285 0.116 0.285 0.060 0.285 0.116 0.119 O.D (Inch) 0.370 0.420 0.206 Max. 0.195 0.242 0.242 0,242 0.242 0.250 Max. 0.375 0.206 Max. 0.195 0.100 0.079 Max. 0.094 Max. 0.100 0.141 Max. 0.145 Max. 0.110 Max . 0.110 Max. 0.155 Max. 0.080 Max. 0.425 0.216 Max. 0.430 0.102 0.390 0.195 0.141 Weight (lbs/ft) 0.080 0.140 0.032 0.029 0.032 0.032 0.038 0.038 0.046 0.148 0.047 0.050 0.008 0.0054 0.010 0.010 0.019 0.019 0.010 0.011 0.020 0.006 0.126 0.034 0.180 0.012 0.165 0,050 0.032 Max Oper. Temp, Range ( C) -40 + 80 -40 + 80 -55 + 80 -40 + 80 -40 + 80 -40 + 80 -40 + 80 -40 + 80 -40 + 80 -55 + 250 -55 + 250 -55 + 200 -40 + 80 -40 + 150 -55 + 150 -55 + 200 -40 + 150 -55 + 200 -55 + 250 -55 + 250 -55 + 250 -55 + 250 -40 + 80 -40 + 80 -55 + 250 -55 + 200 -55 + 200 -55 + 200 -55 + 200 Max Oper. Voltage (Volts RMS) 1,000 4,000 1,900 1,900 2,300 2,300 750 750 750 5,000 1,900 1,900 1,500 1,000 1,200 1,200 1,500 1,500 1,200 1,200 1,500 1,000 5,000 1,900 5,000 1,200 5,000 1,900 2.500 Suggested Alt Cable Use RG63B Use RG214 Use RG55B Use RG58B Use RG59B Use up to

1000 MHz

S D,P,G JAC,AD A,F,T A,F,T V S,AE D,H,U, AF ER,K,AG, L,M,AF D,H,U, AF CAB AB D,H,U, AF D,A,U AF CAB E,R,K. L,AA,AG Code Solder Type Coax l R,AC C, J C, J, Z AB D E E B A,K A,K B AA R,AC C,J DPX NE/NA Military Size 5/9 Seal 1 Size 5/9 Seal 1 Size 5/9 Seal 2 Size 5/9 Seal 1 Size 5/9 Seal 1 Seal 2 Size 5/9 Seal 1 Size 5/9 Seal 1 Size 5/9 Seal 2 Size 5/9 Seal 2 BKA* ARINC Type Coax Size 1(71W1) Size 1(71W1) Size 1(71W1) Size 5 Size 1(71W1) Size 1(71W1) Size 1(71W1A) Size 1(71W1A) Size 5 Size 5 Size 12 Size 5 Size 5 Size 5 Size 5 Size 5 Size 5 Size 5 Size 5 Size 1(71W1) Size 1(71W1A) Size 1(71W1) Size 1(71W1A) Size 1(71W1) Size 1(71W1) Size 1(71W1A) Jacket Material PVC PVC PE PVC PVC PVC PVC PVC PVC FG Braid FG Braid FEP PVC KEL-F KEL-F FEP KEL-F FEP PTFE PTFE PTFE PTFE PVC PVC FG Braid FEP FEP FEP None NOTE: This table is shown for reference only. ITT Cannon recommends that the above information be used as a guideline and may be subject to variation between various cable manufacturers. For specific information concerning the actual physical characteristics of a specific cable, contact the manufacturer.