025-9529-000

025-9524-000 ITT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Micro-D Metal Shell - .050" Contact Spacing MDM MDM connectors are used in applications requiring highly reliable, extremely small, light- weight connectors with higher density contact configurations than available in traditional rec- tangular connectors. They are available in 8 shell sizes accommodating from 9 to 100 con- tacts, and special arrangements of power and coaxial contacts. These connectors are designed to meet the rap- idly increasing demands for an environmental, high performance, rugged, moisture-sealed microminiature connector. This connector employs size 24 MICROPINTM/MICROSOCKETTM contacts on .050 (1.27) centers in a contact density identical to the standard MICRO-D con- nector series, but with these additional features:

• Aluminum shells to provide greater strength, prevent chipping, cracking or breaking, offer electromagnetic (EMI) and RFI shielding.
• Silicone elastomer compression interfacial seal to provide a moisture and humidity seal between each contact and between contacts and shell. Specifications STANDARD MATERIALS AND FINISHES Shell Insulator Contacts Mounting Hardware Kit, Jackpost (3) items Washer Standard Epoxy - 6061-T6 Aluminum alloy per QQ-A-200/8, yellow chromate/ cadmium, Type II, Class 3 over electroless nickel per SAE AMS-C-26074, Class 4. - Liquid Crystal Polymer per MIL-M-24519, Type GLCP-30F (9-100) - Glass filled diallyl phthalate per MIL-M-14, Type SDGF (7*2 and 24*4) - Polyphenylene sulfide per MIL-M-24519, Type GST-40F (16*5) - Polyester per MIL-M-24519, Type GPT-30F (10*10) - Copper alloy, gold plate - 300 Series stainless steel, passivate - 300 Series stainless steel, passivate - 400 Series stainless stell, passivate - Hysol EE4215/HD3561, color black or Hysol EE4198/HD3561, color green Coupling Polarization Contact Spacing Centers Shell Styles No. of Contacts Coaxial Cable Wire Size Contact Termination - Friction/jackscrews - Keystone-shaped shells - .050 (1.27) - Plug and receptacle - 9 thru 100 signal; 5 signal/2 coaxial; 5 signal/2 power; 11 signal/5 coaxial; 11 signal/5 power; 0 signal/10 coaxial; 0 signal/10 power; 20 signal/4 coaxial; 20 signal/4 power - RG - 178/U - #24 thru #32 AWG - Multiple indent crimp MECHANICAL FEATURES Performance Data The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where applicable. Data is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. Test Dielectric Withstanding Voltage Method 3001: Insulation Resistance Method 3003

600 VAC at sea level

150 VAC at 70,00' altitude

5,000 megohms minimum No physical damage No physical damage No loss of continuity > 1 µ sec No physical damage No loss of continuity > 1 µ sec No mechanical or electrical defects Insulation resistance > 100 megohms Shall be capable of mating and unmating, and meet contact resistance requirements 8 milliohms maximum 10 milliohms maximum 5 lb. minimum axial load - 55˚C to +125˚C

50 G' s, 3 axes, 6 millisecond

20 G' s, 10-2,000 Hz. 12 hrs 48 hours At 3 amps At 1 milliamp Thermal Shock Method 1003. Condition A: Physical Shock Method 2004, Condition E: Vibration Method 2005, Condition IV: Durability 500 cycles of mating and unmating, 500 CPH max. Moisture Resistance Method 1002, Type II, omit steps 7a & 7b Salt Spray Method 1001, Condition B: Contact Resistance (MIL-STD-202) Method 1001, Condition B: Contact Retention Per MIL-DTL-83513 Method Criteria of Acceptance

www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Micro-D Metal Shell - .050" Contact Spacing MDM How to Order For MIL-DTL-83513 ordering information see pages 16 and 17 SERIES RoHS COMPLIANCE MDM 51 P H 001 P XXX- - SERIES CONTACT ARRANGEMENTS CONTACT TYPE TERMINATION TYPE CONTACT ARRANGEMENTS CONTACT TYPE TERMINATION TYPE TERMINATION CODE TERMINATION CODE* HARDWARE MDM: (Size 9-100) Liquid Crystal Polymer (LCP) MDM: (Combo Layout) Diallyl Phthalate (DAP) (H) 001 - 18",7/34 strand,#26 AWG, MIL-W-16878/4, Type E Teflon, yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. M - Military specification hardware, see page 11 for military hardware codes. P - Jackpost K - Jackscrew-standard profile L - Jackscrew-low profile F - Float mount B - No hardware standard .091 (2.31) dia. hole for sizes 9-51; .120 (3.05) dia. hole for size 100. A - .125 (3.18) dia. mounting holes for sizes 9-51; .166 (4.22) dia. hole for size 100. B1 - .1475 (3.75) dia. hole for size 100 (Per MIL-DTL-83513) No Number - (Standard cadmium/yellow chromate over nickel A174 - Electroless nickel A172 - Gold over nickel A141 - Irridite/alodine A30 - Black anodize *See page 79 and 81 for additional Termination codes. 16C5, 10C10, 7C2, 24C4 (coaxial) 16P5, 10P10, 7P2, 24P4 (power) P - Pin S - Socket H - Harness-insulated wire. L - Solid-uninsulated wire. S - Solder pot to accept #26 AWG MAX. harness wire. (Not available with power contact arrangements.) or combination of coax and power SHELL FINISH MOD CODES HARDWARE SHELL FINISH MOD CODES } (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. R

Micro-D Metal Shell - .050" Contact Spacing MDM COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Harness Type (H) Solid Uninsulated Type (L) Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) * Cavity #1 black H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042 H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 L61 L56 L57 L39 L58 L14 L16 L10 .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) #26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded. #25 AWG gold plated copper All Yellow Color Cod ed* Te rmination Code Le ngth The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Cannon Modification Code (Not MS) Contact Arrangements (Face View of Pin insert - Use Reverse Order for Socket Side) Standard

9 Contacts

1 2 3 4 5 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 191 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 A1 A1 A2 A3 A4 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 A2123 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 3717 18 19 20 21 22 23 24 25 26 27 28 29 30 3114 15 16 17 18 19 20 21 22 23 24 25 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 9 10 11 12 13 14 15 12 13 14 15 16 17 18 19 20 216 7 8 9

15 Contacts 21 Contacts

37 Contacts31 Contacts25 Contacts

51 Contacts

20 Micro contacts

4 Coax or 4 Power

(Not MS) Size 25 Shell

5 Micro contact

2 Coax or 2 Power

.320 (8.13) A2A1 A3 A4 A5 567 91 01 18 23 41 Size 51 Shell

11 Micro contact

5 Coax or 5 Power

.714 (18.14) .460 (11.68) .007 (0.18) .043 (1.09)

100 Contacts

Contact identification numbers are for reference only and do not appear on insulator or connector body. .103 .025 (0.64) TYP . .050 (1.27) TYP . Size 100 Shell

0 Micro contact

10 Coax or 10 Power

Micro-D Metal Shell - .050" Contact Spacing MDM COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to MIL-DTL-83513) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Plug Receptacle Receptacle (MDM-100 only) Solder Pot Solder Pot Pigtail termination .110 (2.79) MAX. .110 (2.79) MAX. .200 (5.08) MAX. .200 (5.08) MAX. D D D F F F TWO MTG. HOLES TWO MTG. HOLES TWO MTG. HOLES .284 (7.21) MAX. .296 (7.52) MAX. .416 (10.57) MAX. .429 (10.09) MAX. .429 (10.90) MAX. .198 (5.03) MAX. .296 (7.52) MAX. .394 (10.01) MAX. C C C B B B .186 (4.72) MAX. .093 (2.36) REF. .093 (2.36) REF. .093 (2.36) REF. .198 (5.03) MAX. A A A E E E G G G Part Number By Shell Size MDM-9P* MDM-9S* MDM-15P* MDM-15S* MDM-21P* MDM-21P* MDM-25P* MDM-25S* MDM-31P* MDM-31S* MDM-37P* MDM-37S* MDM-51P* MDM-51S* MDM-100P* MDM-100S* .785 (19.94) .785 (19.94) .935 (23.75) .935 (23.75) 1.085 (27.56) 1.085 (27.56) 1.185 (30.10) 1.185 (30.10) 1.335 (33.91) 1.335 (33.91) 1.485 (37.72) 1.485 (37.72) 1.435 (36.45) 1.435 (36.45) 2.170 (55.12) 2.170 (55.12) .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10) *Add lead type and length; see How To Order. *Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails. .400 (10.16) .400 (10.16) .550 (13.97) .550 (13.97) .700 (17.78) .700 (17.78) .800 (20.32) .800 (20.32) .950 (24.13) .950 (24.13) 1.100 (27.94) 1.100 (27.94) 1.050 (26.67) 1.050 (26.67) 1.442 (36.63) 1.442 (36.63) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .270 (6.86) .310 (7.87) .310 (7.87) .360 (9.14) .360 (9.14) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) .063 (1.79) .063 (1.79) .084 (2.39) .083 (2.37) .105 (2.99) .104 (2.97) .119 (3.39) .118 (3.36) .140 (3.99) .139 (3.96) .161 (4.59) .160 (4.56) .193 (5.50) .188 (5.35) .500 (14.3) 1.040 (29.5) A Max. B Max. C Max. D Max. E Max. F +_.005 (0.13) G Max. Average Weights oz. (gm.) ±5% Panel Mounting Dimensions (Sizes 9 - 100) .200 ±.005 (5.08 ±0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted .395 ±.005 (10.03 ±0.13) .300 ±.005 (7.62 ±0.13)

Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (for sizes 9-51) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change Screw Lock Assembly 90˚ Angle Mounting Bracket Screw Lock Assembly* *NOTE Torque value is 2.5 in/lbs max. Jackpost - (P) 90˚ Angle Mounting Bracket This hardware supplied unassembled. .052 (1.32) TYP. .260 (6.60) MAX. #2-56 UNC-2B THD B .178 ± .005 (4.52 ± 0.13) .096 ± .005 (2.44 ± 0.13)DIA. .093 (2.36) RECOMMENDED PANEL THICKNESS BUSHING .182 (4.62) MAX. .688 (17.48) MAX. .408 (10.36) MAX. RETAINING CLIP LOCK SCREW MATING FACE CONNECTOR SHOWN FOR REF. ONLY #2-56 UNC-2B .185 (4.70) MAX. .500 (12.7) MAX. PANEL REF. .232 (5.89) MAX. #2-56 UNC-2A .170 (4.32) MAX. A

Description

Mounting Bracket 90˚ MDM for 9 thru 37 Shell Sizes Mounting Bracket 90˚ MDM for 51 Shell Size NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit (320-9505-000) consists of two assmblies, shipped unassmbled. 322-9500-000 320-9505-000 015-9516-002 015-9516-003 .147 (3.73) .169 (4.29) .308 (7.82) .350 (8.89) N/A N/A Part Number A +/-.005 (±0.13) B Max. Jackpost Bushing (for rear panel mounting-for sizes 9-51) 3/32 (2.4) 1/16 (1.6) 3/64 (1.2) 1/32 (0.8) *A kit consists of 2 jackpost, 2 nuts, 2 washers. .087 (2.21) .056 (1.42) .042 (1.07) .025 (0.64) 320-9505-007 320-9505-006 320-9505-005 320-9505-004 Panel A Thickness Jackpost Kit Number* .401 (10.19) .551 (14.00) .701 (17.81) .801 (20.34) .951 (24.16) 1.101 (27.97) 1.051 (26.70) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .295 (7.49) .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.34) 1.265 (32.13) 1.215 (30.86) Shell Size Plug and Receptacle Dimensions Jackpost diameter within the "A" HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS #2-56 UNC-2B THD MATING FACE .170 (4.32) .185 (4.70) A .500 (12.7) .480 (12.19) #2-56 UNC 2A THD .126 (3.20) .125 (3.18) DIA. TYP .105 (2.67) .100 (2.54) R TYP. 27˚ 26˚ TYP A C B A +.004 (0.10) -.000 (0.00) B +.004 (0.10) -.000 (0.00) C +_.005 (0.13) A +.005 (0.13) -.000 (0.00)

Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (for size 100) www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change This hardware supplied unassembled. #4-40 UNC-2A THD #4-40 UNC-2B NOTHING OR FEMALE THD .185 (4.70) MAX. .500 (12.70) MAX. PANEL - MAY BE USED WITH .093 (2.36) MAX THICK PANEL .123 ± .005 (3.12 ± 0.13) DIA. #4-40 UNC-2B THD A .395 (10.03) MAX. .235 ± .005 (5.97 ± 0.13) .064 ± .010 (1.62 ± 0.25) TYP. B 180 (4.57 ) +.010 -.005 +.025 -0.13 Jackpost - (P)90˚Angle Mounting Bracket 90° Angle Mounting Bracket Mounting Bracket 90˚ MDM 320-9505-015 N/A Part Number A ± .005 (0.13) B Max. #4 LOCK WASHER MATING SIDE Note: Size 100 requires .120 dia (B) mounting hole when using Commercial (P) jackpost kits. MATING FACE #4-40 UNC-2A THD .735 (18.67) MAX. Jackscrew - (K) Standard PART HAS A .040 (1.02) MAX AXIAL FLOAT CONNECTOR SHOWN FOR REF. ONLY This hardware is factory installed. .014 ± .004 (0.36 ± 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .174 ± .005 (4.4 ± .10) .185 (4.70) MAX .093 (2.36) REF. .116 ± .002 (2.29 ± .051) DIA .031 ± .003 (0.79 ± 0.08) MATING FACE Float Mount - (F) Std. HEX. SOCKET HEAD. .078 (1.98) ACROSS FLATS .050 (1.27) MIN. DEPTH .155 (3.94) MAX. .040 (1.02) MAX. AXIAL FLOAT #4-40 UNC-2A THDMATING SIDE *NOTE: Torque values are as follows: Low Profile Jackscrew (L)-4.0 in-lbs Standard Profile Jackscrew (K)-4.0 in-lbs Jackscrew - (L) (Low Profile) Jackpost Bushing (for Rear Panel Mounting) ENGAGING FACE RECEPTACLE SHOWN FOR REF. ONLY #4-40 THREAD RETAINING NUT .500 (12.70) MAX. .185 (4.70) .170 (4.32) A #4-40 UNC-2B 3/16" HEX. LOCKING POST .125 (3.18 1.516 (38.51 .401 (10.18 1.800 ± .005 (45.72 ± 0.13) .161 (4.09) .159 (4.04) DIA. R +.004 -.000 +1.10 -0.00 +.004 -.000 +1.10 -0.00 +.005 -.000 +0.13 -0.00 Panel Thickness Jackpost Kit Number* Dimensions for Rear Panel Mounting A +.005 (0.13) -.000 (0.00) 3/32 (2.4) 1/16 (1.6) 1/32 (0.8) 3/64 (1.2) *2 jackposts, 2 nuts, 2 washers .087 (2.21) .058 (1.42) .025 (0.64) .042 (1.07) 320-9505-013 320-9505-012 320-9505-010 320-9505-011 Torque value for size 100 Note: Size 100 requires B mounting hole shell size when using rear panel mount jackposts

Micro-D Metal Shell - .050" Contact Spacing MDM Connector Saver www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change .040 (1.02) MAX. ALLOWABLE AXIAL FLOAT JACKSCREW/JACKPOST BUSHING (FOR REFERENCE ONLY SEE ORDERING INFORMATION BELOW.) MICROSOCKET CONNECTOR RECEPT INTERFACIAL SEAL .185 (4.70) MAX. (TYP.) E-RING (TYP.) CONNECTOR, PLUG BACKPOTTING, EPOXY .790 (20.07) MAX. .315 (8.00) MAX. .090 (2.29) REF. (TYP.) .900 (22.86) REF. MDM Size 9 Shown #2-56 UNC-2A THD (9-51) (TYP.) MICROPIN C B A Save wear and tear on your equipment and systems connectors by using the "Connector Saver". The multi-matings and unmatings experienced by most connectors during testing and final check out can be eliminated. Simply mate the "Connectors Saver" to your unit and use the opposite side for your testing interface...less wear, less tear, less chance of damage. It is available in all eight standard MDM layouts. Mating hardware is available and can be ordered either separately or included with the connector saver. Size 100 MDM98479-86 MDM98479-87 MDM98479-88 MDM98479-89 MDM98479-90 MDM98479-91 MDM98479-92 MDM98479-93 MDM98479-18 MDM98479-19 MDM98479-20 MDM98479-21 MDM98479-14 MDM98479-15 MDM98479-16 MDM98479-17 MDM98479-78 MDM98479-79 MDM98479-80 MDM98479-81 MDM98479-82 MDM98479-83 MDM98479-84 MDM98479-85 MDM-97294-371 MDM-97294-372 MDM-97294-373 MDM-97294-374 MDM-97294-375 MDM-97294-376 MDM-97294-377 MDM-97294-717 320-9505-014 320-9505-014 320-9505-014 320-9505-014 320-9505-014 320-9505-014 320-9505-014 320-9508-014* .785 (19.94) .935 (23.75) 1.085 (27.56) 1.185 (30.10) 1.335 (33.91) 1.485 (37.72) 1.435 (36.45) 2.170 (55.12) Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings. Size 9-51-#2-56 UNC-2B Thread Size 100-#4-40 UNC-2B Thread *** .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.32) 1.265 (32.13) 1.215 (30.86) 1.800 (45.72) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.91) .394 (10.01) With Hardware Electroless Nickel (A174) Plated Cadmium over Nickel (A101) Plated W/O Hardware With Hardware W/O Hardware *Hardware Kits A Max. B ± .005 (0.13) C Max.

Micro-D Metal Shell - .050" Contact Spacing MIL-DTL-83513 How to Order - MIL-DTL-83513 Part Number Nomenclature – Slash Sheets 1-9 www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change SERIES Metal Shell, Liquid Crystal Polymer (LCP) Diallyl Phthalate Insulator Polyester Insulator MDM MDB MDVB Plug, Connector, Solderpot Receptacle, Connector, Solderpot Plug, Connector, Crimp Type Receptacle, Connector, Crimp Type Hardware Only Plug, Connector, Solderpot Receptacle, Connector, Solderpot Plug, Connector, Crimp Type Receptacle, Connector, Crimp Type Metal Shell Plastic long, #26 AWG per MIL-W-22759/11-26-9 (all white) long, #26 AWG per MIL-W-22759/11-26-9 (all white) long, #26 AWG per MIL-W-22759/11-26 Color Coded per MIL-STD-681, System 1, 10 colors repeating long, #26 AWG per MIL-W-22759/11-26- Color Coded per MIL-STD-681, System 1, 10 colors repeating long. #25 AWG, type S per QQ-W-343, Gold Plated long, #25 AWG, type S per QQ-W-343, Gold Plated long, #25 AWG, type S per QQ-W-W-343, Tin Plated long, #25 AWG, type S per QQ-W-343, Tin Plated long, #26 AWG per MIL-W-22759/33-26-9 (all white) long, #26 AWG per MIL-W-22759/33-26-9 (all white) long, #26 AWG per MIL-W-22759/33-26 Color Coded per MIL-STD-681, System 1, 10 colors repeating long, #26 AWG per MIL-W-22759/33-26 Color Coded per MIL-STD-681, System 1, 10 colors repeating long, #26 AWG per MIL-W-22759/11-26-9 (all white) long, #26 AWG per MIL-W-22759/11-26 Color Coded per MIL-STD-681, System 1, 10 colors repeating long, #26 AWG per MIL-W-22759/33-26-9 (all white) long, #26 AWG per MIL-W-22759/33-26 Color Coded per MIL-STD-681, System 1, 10 colors repeating 18" 36" 18" 36" .5" 1.0" .5" 1.0" 18" 36" 18" 36" 72" 72" 72" 72"

9 Contact

15 Contact

21 Contact

25 Contact

31 Contact

37 Contact

51 Contact

100 Contact

For every Mil Spec Part Number, ITT has one corresponding part number shown an example For space application, connector shell finish must be "A174" and wire must be per MIL-W-22759/33-26. Any deviations to these P/N'swill result in assignment of a special P/N, consult factory. Size 100 not available in / 06 through / 09. (Plastic shell) Color coding in accordance with MIL-STD-681, System 1, no parenthesis. See page 83 for color code chart. For mounting hardware to Military Specification (sizes 9 to 100) see page 13. No number - for plastic type connector C – for Cadmium/Yellow chromate over nickel N – A174 - Electroless Nickel A174 Tolerance on wire lengths: 18", 36" and 72" long — +1.00"/-0.00" PLASTIC A B C D E F G H MIL-C-83513 SLASH SHEET INSERT ARRANGEMENT WIRE TYPE SHELL FINISH NOTES: 2 36

Micro-D Metal Shell - .050" Contact Spacing MIL-DTL-83513 How to Order - MIL-DTL-83513 Part Number Nomenclature – Slash Sheets 10-27 www.ittcannon.com Dimensions shown in inch (mm) Specifications and dimensions subject to change SERIES Connector, Electrical, Rectangular Microminiature, Polarized Shell PC Board Mounting long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped .109" .140" .172" For space application, connector shell finish must be "N". Any deviations to these P/N'swill result in assignment of a special P/N, consult customer service. No letter - for plastic type connector C - Cadmium / Yellow chromate over nickel N - Electroless Nickel Tolerance on wire lengths ±.015 A B C D E F G H M83513/ 10 * *CA- MIL-C-83513 SLASH SHEET INSERT ARRANGEMENT WIRE TYPE SHELL FINISH NOTES: N - No jackpost P - Jackpost (permanently attached) T - Threaded insert HARDWARE For every Mil Spec Part Number, ITT has one corresponding part number 10 – Connector, Plug, Condensed Board Right Angle (CBR), Sizes 9 – 37 11 – Connector, Plug, CBR, Size 51 12 – Connector, Plug, CBR, Size 100 13 – Connector, Receptacle, CBR, Sizes 9 – 37 14 – Connector, Receptacle, CBR Size 51 15 – Connector, Receptacle, CBR, Size 100 16 – Connector, Plug, Board Right Angle (BR), Sizes 9 – 37 17 – Connector, Plug, BR, Size 51 18 – Connector, Plug, BR, Size 100 19 – Connector, Receptacle, BR, Sizes 9 – 37 20 – Connector, Receptacle, BR Size 51 21 – Connector, Receptacle, BR Size 100 22 – Connector, Plug, Board Straight (BS), Sizes 9 – 37 23 – Connector, Plug, BS, Size 51 24 – Connector, Plug, BS, Size 100 25 – Connector, Receptacle, BS, Sizes 9 – 37 26 – Connector, Receptacle, BS, Size 51 27 – Connector, Receptacle, BS Size 100