FPI018_V04 STEGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

FPI/FPO 018 | up to 536 m³/h (223 x 223 mm) TECHNICAL DATA Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 56,000 h rotor metal Connection 3-pole clamp for 2.5 mm², clamping torque 0.8 Nm max. Casing, hood, flaps plastic according to UL94 V-0, light grey; UV light resistant according to UL746C (f1) Enclosure cut-out 223 x 223+1 mm Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness 1 — 4 mm). Additional use of screws possible if needed1. Filter mat ISO coarse 55% acc. to ISO 16890 (G3), initial gravimetric arrestance 57 % Filter material synthetic fibre with progressive construction, temperature resistant to +100 °C, self-extinguishing class F1, moisture resistant to 100 % RH, reusable Operating temperature -25 to +65 °C (-13 to +149 °F) Storage temperature -40 to +70 °C (-40 to +158 °F) Operating/Storage humidity max. 75 % RH (non-condensing) Protection type/Protection class IP54 / I (earthed) Environmental rating UL/NEMA UL TYPE 12 / NEMA 12 Approvals VDE, UL File No. E234324, EAC Note other voltages on request 1 Drilling marks for screw mounting are indicated on mounting frame. AIRFLOW DIRECTION "IN": FIL TER FAN FPI 018 Art. No. Operating voltage Air volume, free flow Air volume with exit filter Current consumption (50/60 Hz) Power consumption Average noise level (DIN EN ISO 4871) Depth in enclosure Weight (approx.) Filter mat 01873.0-30 AC 230 V, 50/60 Hz 305 m³/h 271 m³/h 300/340 mA 64 W 64 db (A) 147 mm 2.4 kg G3 01873.9-30 AC 115 V, 50/60 Hz 332 m³/h 293 m³/h 600/700 mA 81 W 67 db (A) 147 mm 2.4 kg G3 AIRFLOW DIRECTION "IN": EXIT FIL TER FPI 118 Art. No. Depth in enclosure Weight (approx.) Air outlet 11873.0-00 46 mm 0.6 kg air-flap outlet technology Filter fans are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations and protects electronic components from overheating. The Filter Fan Plus series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available – the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan. The Filter Fan Plus series may also be used outdoors with appropriate protective measures or when equipped with weather proof accessories, e.g. Hose-proof Hood FFH 086. > New air-flap outlet technology for high airflow > Easy mounting > Protection type test/Environmental rating by independent testing institutes (VDE and UL) > Two systems for optimal airflow (FPI/FPO) > Standard enclosure cut-out sizes (5 sizes) > One filter mat warmcold Exit Filter FPI 118 Filter Fan FPI 018 Air-flaps Filter mat SYSTEM FPI TECHNICAL DATASHEET

FPI 118FPI 018 FPO 118FPO 018 257 223 147 26 223 257 223 147 26 223 257 223 147 26 223 257 223 147 26 223 223 0 223 STEGO - PRODUCT CATALOGUE TECHNICAL DRAWINGS AIRFLOW DIRECTION "OUT": INTAKE FIL TER FPO 118 Art. No. Depth in enclosure Weight (approx.) Filter mat 11883.0-30 25 mm 0.5 kg ISO coarse 55% acc. to ISO 16890 (G3), initial gravimetric arrestance 57 % AIRFLOW DIRECTION "OUT": FIL TER FAN FPO 018 Art. No. Operating voltage Air volume, free flow Air volume with intake filter Current consumption (50/60 Hz) Power consumption Average noise level (DIN EN ISO 4871) Depth in enclosure Weight (approx.) Air outlet 01883.0-00 AC 230 V, 50/60 Hz 536 m³/h 281 m³/h 300/340 mA 64 W 65 db (A) 147 mm 2.4 kg air-flaps 01883.9-00 AC 115 V, 50/60 Hz 581 m³/h 310 m³/h 600/700 mA 81 W 68 db (A) 147 mm 2.4 kg air-flaps warmcold Filter Fan FPO 018 Intake Filter FPO 118 Air-flaps Filter mat SYSTEM FPO COOLING FIL TER MAT FM 086 Filter class 215 x 215 mm Initial gravimetric arrestance 1 packing unit ISO coarse 55% acc. to ISO 16890 (G3) Art. No. 08636.0-00 57 % 5 pieces ENCLOSURE CUT -OUT ENCLOSURE CUT -OUT TECHNICAL DATASHEET