T00008_15 SSDI

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Designer's Data Sheet SOLID STATE DEVICES, INC. FEATURES: NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00008C STA60K7.9P thru STA60K100P 60,000 WATTS PEAK PULSE POWER 7.9 - 100 VOLTS LOW VOLTAGE BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR

  • 7.90-100 Volt Bidirectional
  • Smaller than Microsemi 60KS200C Types
  • Hermetically Sealed
  • Meets all environmental requirements of MIL-PRF-19500
  • Custom configurations available
  • TX and TXV Screening Available

14830 Valley View Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773

  • Protection of Voltage Sensitive Components
  • Protection Against Power Interuption
  • Lightning Protection Steady State Power Dissipation Stand Off Voltage 5.6-75 VV RWM

400 WPD

Note: SSDI Transient Suppressors offer standard Breakdown V oltage Tolerances of + 10% (A) and + 5% (B). For other V oltage and V oltage Tolerances, contact SSDI's Marketing Department Peak Pulse Power @ 1.0 msec PPP 60,000 RMD APPLICATIONS: Peak Pulse Power and Steady State Power Derating Peak Pulse Power and Pulse Width Peak Pulse Power and Pulse Width W See Graph See Graph -65°C to +175°C Package shown is standard configuration. SSDI can custom design your module with terminals that meet your unique design criteria. Additionally, SSDI can package these devices with an irregular footprint or offset mounting positions. This data sheet is meant to serve as an example of SSDI's Transient Protection Module Capabilities. For custom configurations, please contact SSDI's Marketing Department. AMBIENT TEMPERATURE ( °C) PEAK PULSE POWER VS. TEMPERA TURE DERA TING CUR VE PEAK PULSE POWER (% Rated 25 °C Power) M MAXIMUM RATINGS

SOLID STATE DEVICES, INC.

Electrical Characteristics

STA60K7.9P thru STA60K100P STA60K7.9P STA60K8.9P STA60K9.8P STA60K10.7P STA60K11P STA60K12.7P STA60K13.5P STA60K15P STA60K16.7P STA60K18P STA60K20.2P STA60K22.6P STA60K24.5P STA60K27.9P STA60K30.5P STA60K34P STA60K36P STA60K39P STA60K45P STA60K49P STA60K51P STA60K57P STA60K62P STA60K68P STA60K75P STA60K82P STA60K91P STA60K100P Phone: (562) 404-4474 * Fax: (562) 404-1773 A 7.0 6.0 6.0 5.0 5.0 4.0 4.0 3.0 3.0 2.6 2.6 2.0 2.0 2.0 1.6 1.6 1.2 1.2 1.2 1.0 1.0 0.8 0.8 0.8 0.8 0.6 0.6 0.6 5.6 6.2 6.8 7.5 8.2 9.1 14.5 15.0 16.0 17.5 18.5 19.5 21.0 23.0 25.0 27.0 30.0 33.5 36.0 40.0 43.5 47.0 52.0 55.0 60.0 65.0 70.0 78.0 87.0 93.0 103.3 113.5 126.5 138.5 .03 .03 .03 .05 .05 .05 .05 .05 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .07 .07 .07 .07 .08 .08 .08 .08 .09 0.07 0.08 0.09 0.10 0.11 0.11 0.12 0.12 0.13 0.13 0.15 0.16 0.18 0.25 0.40 0.50 0.60 0.70 1.0 1.2 1.4 1.8 2.0 2.2 2.5 3.0 4.0 4.5 1.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 5120 4800 4360 4000 3720 3480 3160 2720 2560 2280 2080 1880 1720 1560 1400 1280 1200 1080 1000 920 840 760 680 640 560 520 480 440 OhmsVolts % / °C 7.9 8.9 9.8 10.7 11.0 12.7 13.5 15.0 16.7 18.0 20.2 22.6 24.5 27.9 30.5 34.0 36.0 39.0 45.0 49.0 51.0 57.0 62.0 68.0 75.0 82.0 91.0 100.0 125 175 200 175 250 300 350 450 500 550 625 750 1000 1125 For optional high reliability screening or higher zener voltages, consult SSDI MARKETING Department. mAVolts A Volts For 5% Voltage Tolerance specify "B" in place of A V BR @I BRT V RWM V C IPP IRM Z BR @ I BRT TCIR @ V RWM Nominal Voltage Test Current Voltage Reverse Leakage Current Voltage (max) @ Current tp=1ms (note 4) Maximum Continuous Current (note 3) Dynamic Impedance (note 2) Maximum Termperature Coefficient Break Down (note 1) Max Reverse Stand OffPeak Pulse Clamping A PEAK PULSE POWER (KW ) PEAK PULSE POWER VS. PULSE WIDTH PULSE WIDTH CURRENT PULSE W AVEFORM STEADY ST A TE POWER DERA TING % PEAK V ALUE STEADY STATE POWER (% of 25ºc rated power) CASE TEMPERATURE ( °C) Notes: 1. All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to heating effects. 2. Dynamic impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC test current superimposed on the test current. 3. Ratings based on 25° C case temperature. 4. Pulse width (tp) is delined as the time from rated peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP.