Datasheet - STD5NK60ZT4 - N-channel 600 V, 1.2 Ω typ., 5 A SuperMESH Power MOSFET in a DPAK package
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 16
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 DPAK (TO-252) type C3 package information
- 4.2 DPAK (TO-252) packing information
Features
Order code VDS RDS(on) max. ID STD5NK60ZT4 600 V 1.6 Ω 5 A
- 100% avalanche tested
- Gate charge minimized
- Very low intrinsic capacitance
- Zener-protected
Applications
- Switching applications
Description
This high-voltage device is a Zener-protected N-channel Power MOSFET developed using the SuperMESH technology by STMicroelectronics, an optimization of the well- established PowerMESH. In addition to a significant reduction in on-resistance, this device is designed to ensure a high level of dv/dt capability for the most demanding applications. TAB DPAK D(2, TAB) G(1) S(3) AM01476v1_tab Product status link STD5NK60ZT4 Product summary Order code STD5NK60ZT4 Marking D5NK60Z Package DPAK Packing Tape and reel N-channel 600 V, 1.2 Ω typ., 5 A SuperMESH Power MOSFET in a DPAK package STD5NK60ZT4 Datasheet DS2857 - Rev 9 - September 2023 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Pulse width limited by safe operating area.
- ISD ≤ 5 A, di/dt ≤ 200 A/μs,VDS (peak) ≤ V(BR)DSS, VDD = 80% V(BR)DSS.
Table 2. Thermal data
- When mounted on an 1-inch² FR-4, 2 Oz copper board.
Table 3. Avalanche characteristics
2 Electrical characteristics
TC = 25 °C unless otherwise specified. Table 4. On/off states
- Specified by design, not tested in production.
Table 5. Dynamic
- Coss eq. is defined as the constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
- Specified by design, not tested in production.
Table 6. Switching times Figure 18. Switching time waveform)
Electrical characteristics
Table 7. Source-drain diode
- Pulsed: pulse duration = 300 µs, duty cycle 1.5%.
- Pulse width is limited by safe operating area.
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area Figure 2. Normalized transient thermal impedance Figure 3. Typical output characteristics Figure 4. Typical transfer characteristics Figure 5. Typical drain-source on-resistance Figure 6. Typical gate charge characteristics
3 Test circuits
Figure 13. Test circuit for resistive load switching times Figure 14. Test circuit for gate charge behavior Figure 15. Test circuit for inductive load switching and Figure 16. Unclamped inductive load test circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. STD5NK60ZT4
Package information
4.1 DPAK (TO-252) type C3 package information
Figure 19. DPAK (TO-252) type C3 package outline
Table 8. DPAK (TO-252) type C3 mechanical data
Figure 20. DPAK (TO-252) recommended footprint (dimensions are in mm)
4.2 DPAK (TO-252) packing information
Figure 21. DPAK (TO-252) tape outline
Figure 22. DPAK (TO-252) reel outline Table 9. DPAK (TO-252) tape and reel mechanical data
Revision history
Table 10. Document revision history 29-Apr-2005 2 Modified value in Table 7. Removed maturity status indication from cover page. The document status is production data. Updated Section 4 Package information. and the document has been updated accordingly. Removed gate-source Zener diode table. Updated Section 4 Package information.
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2023 STMicroelectronics – All rights reserved STD5NK60ZT4 DS2857 - Rev 9 page 16/16