SSR30C100S1 SSDI

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number / Ordering Information 1/ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level └ Package S1 = SMD1 └ Voltage 100 = 1000 V 120 = 1200 V SMD1 SSR30C100S1 SSR30C120S1

30 A / 1200 V

FEATURES:

  • 1200 Volt Silicon Carbide Schottky Rectifier
  • Average Output Current 30 Amps
  • No Reverse Recovery
  • No Forward Recovery
  • No Switching Time Change Over Temperature
  • Small Package Size
  • TX, TXV, and Space Level Screening Available. 2/ Consult Factory. MAXIMUM RATINGS 3/ Symbol Value Units Peak Repetitive and Peak Reverse Voltage SSR30C100S1 SSR30C120S1 VRRM VR 1000

1200 Volts

Average Rectified Forward Current 4/ (Resistive Load, 60 Hz, Sine Wave) Total IO 30 Amps Peak Surge Current 4/ (8.3 ms Pulse, Half Sine Wave, TA = 25oC) Total IFSM 120 Amps Operating & Storage Temperature TOP & Tstg -55 to +250 oC Junction Temperature TJ -55 to +250 oC Maximum Thermal Resistance 4/ (Junction to Case) Total RθJC 0.8 oC/W NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC 4/ Terminal Pads 1 & 3 Must be connected together for testing and at the Board Level. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043B DOC

ELECTRICAL CHARACTERISTICS 3/ 4/ Symbol Min Typ Max Units Instantaneous Forward Voltage Drop (TA=25ºC, Pulse) IF = 10 A IF = 20 A IF = 30 A IF = 40 A VF1 VF2 VF3 VF4 1.25 1.65 1.8 2.0 1.45 1.75 2.25 --- V DC Instantaneous Forward Voltage Drop (Pulse) TA= -55ºC, IF = 20 A TA= 150 ºC, IF = 20 A VF5 VF6 1.5 2.6 2.0

2.9 VDC

(Rated VR, TA = 25ºC, Pulse) IR1 –– 250 1500 µA Reverse Leakage Current (Rated VR, TA = 150ºC, Pulse) IR2 –– 1 5 mA Junction Capacitance (VR = 10V, f = 1MHz, TA = 25oC) CJ –– 1250 2000 pF NOTES: * Pulse Test: Pulse Width = 300 µsec, Duty Cycle = 2% 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC 4/ Terminal Pads 1 & 3 Must be connected together for testing and at the Board Level. Available Part Numbers: SSR30C100S1 SSR30C120S1 PIN ASSIGNMENT Package Pin 1 Pin 2 Pin 3 SMD1 Anode Cathode Anode SMD1 Outline: Tolerances (Unless Specified): .XX = ±.030” .XXX = ±.010” Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR30C100S1 SSR30C120S1 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043B DOC