RDD022N60 ROHM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. RDD022N60 Nch 600V 2A Power MOSFET Tj °C mJEAR Avalanche energy, single pulse Avalanche energy, repetitive Avalanche current 2.0 EAS *3 1.1 mJ PD 51 1.4 ID,pulse ID *1 1.0 A A V30 V/ns 150 Reverse diode dv/dt IAR Range of storage temperature Tstg Power dissipation (Tc = 25°C) W Junction temperature A dv/dt *5 15 -55 to +150 Unit 600VDSS ID *1 A V TL Marking 022N60 lFeatures VGSS 6.0 Continuous drain current Basic ordering unit (pcs) Pulsed drain current Gate - Source voltage Parameter Tc = 100°C Switching Power Supply 2.0 Value Tc = 25°C Symbol lAbsolute maximum ratings(Ta = 25°C) Drain - Source voltage lOutline lInner circuit lPackaging specifications CPT3 (SC-63) (SOT-428) 600V 6.7W 51W 5) Parallel use is easy. VDSS RDS(on) (Max.) ID PD 1) Low on-resistance. 4) Drive circuits can be simple. 2) Fast switching speed. Tape width (mm) 16 3) Gate-source voltage (VGSS) guaranteed to be 30V. lApplication Reel size (mm) 6) Pb-free lead plating ; RoHS compliant Taping 330 Type Packaging 2,500 Taping code 1/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 WGate input resistance RG f = 1MHz, open drain - 9.5 - Static drain - source on - state resistance WTj = 25°C - 5.2 6.7 Tj = 125°C - RDS(on) VGS = 10V, ID = 1A 10.4 - Unit Max. 700 - 100 Gate threshold voltage VGS (th) VDS = 10V, ID = 1mA 2.5 Gate - Source leakage current VGS = 30V, VDS = 0V - V4.7 Thermal resistance, junction - ambient Soldering temperature, wavesoldering for 10s lElectrical characteristics(Ta = 25°C) Parameter Drain - Source breakdown voltage VDS = 600V, VGS = 0V Unit Tsold RthJA Min. RthJC Symbol Unit °C/W Values V/ns Tj = 125°C 2.41- °C- 265 °C/W Drain - Source avalanche breakdown voltage - 600 ConditionsSymbol V(BR)DS Min. Values Typ. 100 Zero gate voltage drain current V(BR)DSS VGS = 0V, ID = 2A VGS = 0V, ID = 1mA IDSS IGSS - nA Tj = 125°C V V 0.1 mA 1000 100- Tj = 25°C Drain - Source voltage slope dv/dt VDS = 480V, ID = 2A Typ. Symbol Conditions Values lAbsolute maximum ratings lThermal resistance Thermal resistance, junction - case Parameter Max. Parameter 2/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 *1 Limited only by maximum temperature allowed. *2 PW 10ms, Duty cycle 1% *3 L ⋍ 500mH, VDD = 50V, RG = 25W, starting Tj = 25°C *4 L ⋍ 500mH, VDD = 50V, RG = 25W, starting Tj = 25°C, f = 10kHz *5 Reference measurement circuits Fig.5-1. *6 Pulsed Max. Reverse transfer capacitance lElectrical characteristics(Ta = 25°C) Parameter Symbol Conditions Values Unit Min. Typ. 1.2Transconductance Input capacitance 0.5 Output capacitance Coss VDS = 25V - - S Ciss VGS = 0V - 175 - gfs *6 VDS = 10V, ID = 1A pF- Crss f = 1MHz - 3 - pF - 8.34 - - 12.8 Turn - on delay time td(on) *6 VDD ⋍ 300V, VGS = 10V - Effective output capacitance, energy related Effective output capacitance, time related Co(er) Co(tr) VGS = 0V VDS = 0V to 480V RG = 10W - Turn - off delay time td(off) *6 RL = 300W - Fall time tf Typ. ns 25 50 53 106 Max. Unit nC Parameter lGate Charge characteristics(Ta = 25°C) Rise time tr *6 ID = 1A Symbol Values VGS = 10V - 2.1 - Min. 7 - Conditions Total gate charge Gate - Source charge Qgs *6 ID = 2A Qg *6 VDD ⋍ 300V 3.2 - 6.2 VGate plateau voltage V(plateau) VDD ⋍ 300V, ID = 2A - - Gate - Drain charge Qgd 3/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 Cth2 0.0115 Unit A A 1.5 V ns 0.00194 IS = 2A di/dt = 100A/ms 486 - - Peak rate of fall of reverse recovery current dirr/dt Value lTypical Transient Thermal Characteristics Symbol Value Unit Symbol - A A/ms-Tj = 25°C Inverse diode direct current, pulsed K/W Ws/K Rth3 21.5 Cth3 0.14
1.16 Cth1Rth1
Rth4 48.1 Cth4 1.24 Rth2 2.24 ISM *2 - lBody diode electrical characteristics (Source-Drain)(Ta = 25°C) - 1.35 - mC VSD *6 VGS = 0V, IS = 2A Typ. Forward voltage Reverse recovery time Unit Min. Max. Inverse diode continuous, forward current Tc = 25°C Peak reverse recovery current Parameter Symbol Conditions Values Reverse recovery charge trr - 5.5 Qrr Irrm IS *1 4/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lElectrical characteristic curves 100 120 0 50 100 150 200 0.0001 0.001 0.01 0.1 100 1000 0.0001 0.001 0.01 0.1 1 10 100 1000 Ta = 25ºC Single Pulse Rth(ch-a)(t) = ｒ(t)×Rth(ch-a) Rth(ch-a) = 100ºC/W top D = 1 D = 0.5 D = 0.1 D = 0.05 D = 0.01 D = Single Fig.1 Power Dissipation Derating Curve Fig.2 Maximum Safe Operating Area Power Dissipation : PD/PD max. [%] Drain Current : ID [A] Junction Temperature : Tj [°C] Drain - Source Voltage : VDS [V] Fig.3 Normalized Transient Thermal Resistance vs. Pulse Width Normalized Transient Thermal Resistance : r(t) Pulse Width : PW [s] 0.001 0.01 0.1 100 0.1 1 10 100 1000 PW = 100ms PW = 1ms PW = 10ms Ta=25ºC Single Pulse Operation in this area is limited by RDS(on) (VGS = 10V) 5/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lElectrical characteristic curves 0.01 0.1 1 10 100 Ta = 25ºC VDD = 50V, RG = 25W VGF = 10V, VGR = 0V 500 1000 1500 2000 2500 3000 3500 4000 Ta=25ºC 100 120 0 25 50 75 100 125 150 175 Fig.4 Avalanche Current vs Inductive Load Avalanche Current : IAR [A] Coil Inductance : L [mH] Fig.5 Avalanche Power Losses Avalanche Power Losses : PAR [W] Frequency : f [Hz] Fig.6 Avalanche Energy Derating Curve vs Junction Temperature Avalanche Energy : EAS / EAS max. [%] Junction Temperature : Tj [ºC] 6/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lElectrical characteristic curves 0 10 20 30 40 50 Ta=150ºC Pulsed VGS= 10.0V VGS= 4.5V VGS= 6.5V VGS= 5.5V 0.0 0.1 0.2 0.3 0.4 0.5 0 1 2 3 4 5 Ta=150ºC Pulsed VGS= 10.0V VGS= 4.5V VGS= 6.5V VGS= 5.5V Fig.7 Typical Output Characteristics(I) Fig.8 Typical Output Characteristics(II) Fig.9 Tj = 150°C Typical Output Characteristics(I) Fig.10 Tj = 150°C Typical Output Characteristics(II) Drain - Source Voltage : VDS [V] Drain - Source Voltage : VDS [V] Drain Current : ID [A] Drain Current : ID [A] Drain Current : ID [A] Drain - Source Voltage : VDS [V] Drain Current : ID [A] Drain - Source Voltage : VDS [V] 7/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lElectrical characteristic curves -50 -25 0 25 50 75 100 125 150 VDS= 10V ID= 1mA Plused Fig.12 Typical Transfer Characteristics Fig.11 Breakdown Voltage vs. Junction Temperature Drain - Source Breakdown Voltage : V(BR)DSS [V] Drain Current : ID [A] Fig.13 Gate Threshold Voltage vs. Junction Temperature Gate Threshold Voltage : VGS(th) [V] Junction Temperature : Tj [°C] Fig.14 Transconductance vs. Drain Current Transconductance : gfs [S] Drain Current : ID [A] Junction Temperature : Tj [°C] Gate - Source Voltage : VGS [V] 500 550 600 650 700 750 800 850 900 -50 -25 0 25 50 75 100 125 150 0.01 0.1 0.01 0.1 1 10 VDS= 10V Pulsed Ta= -25ºC Ta=25ºC Ta=75ºC Ta=125ºC 8/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lElectrical characteristic curves -50 -25 0 25 50 75 100 125 150 ID = 1.0A ID = 2.0A VGS= 10V Plused Fig.15 Static Drain - Source On - State Resistance vs. Gate Source Voltage Static Drain - Source On-State Resistance : RDS(on) [W] Gate - Source Voltage : VGS [V] Fig.16 Static Drain - Source On - State Resistance vs. Junction Temperature Static Drain - Source On-State Resistance : RDS(on) [W] Junction Temperature : Tj [ºC] Fig.17 Static Drain - Source On - State Resistance vs. Drain Current Static Drain - Source On-State Resistance : RDS(on) [W] Drain Current : ID [A] 100 0.01 0.1 1 10 VGS= 10V Plused Ta=125ºC Ta=75ºC Ta=25ºC Ta= -25ºC 0 2 4 6 8 10 12 14 16 18 20 ID = 2.0A ID = 1.0A Ta=25ºC Pulsed 9/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lElectrical characteristic curves Fig.18 Typical Capacitance vs. Drain - Source Voltage Capacitance : C [pF] Drain - Source Voltage : VDS [V] Fig.20 Switching Characteristics Switching Time : t [ns] Drain Current : ID [A] Fig.21 Dynamic Input Characteristics Total Gate Charge : Qg [nC] Gate - Source Voltage : VGS [V] Coss Stored Energy : EOSS [uJ] Fig.19 Coss Stored Energy Drain - Source Voltage : VDS [V] 100 1000 0.01 0.1 1 10 100 1000 Coss Crss Ciss Ta=25ºC f = 1MHz VGS = 0V 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Ta = 25ºC VDD= 300V ID= 2A Plused 0.0 0.5 1.0 1.5 0 200 400 600 Ta=25ºC 10/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lElectrical characteristic curves Fig.22 Inverse Diode Forward Current vs. Source - Drain Voltage Inverse Diode Forward Current : IS [A] Source - Drain Voltage : VSD [V] Fig.23 Reverse Recovery Time vs.Inverse Diode Forward Current Reverse Recovery Time : trr [ns] Inverse Diode Forward Current : IS [A] 100 1000 0.1 1 10 Ta=25ºC di / dt = 100A / ms VGS = 0V Pulsed 0.001 0.01 0.1 0.0 0.5 1.0 1.5 Ta=125ºC Ta=75ºC Ta=25ºC Ta= -25ºC VGS=0V Pulsed 11/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lMeasurement circuits Fig.1-1 Switching Time Measurement Circuit Fig.1-2 Switching Waveforms Fig.2-1 Gate Charge Measurement Circuit Fig.2-2 Gate Charge Waveform Fig.3-1 Avalanche Measurement Circuit Fig.3-2 Avalanche Waveform Fig.4-1 dv/dt Measurement Circuit Fig.4-2 dv/dt Waveform Fig.5-1 di/dt Measurement Circuit Fig.5-2 di/dt Waveform 12/13 2016.06 - Rev.C
www.rohm.com © 2016 ROHM Co., Ltd. All rights reserved. Data Sheet RDD022N60 lDimensions (Unit : mm) Dimension in mm / inches CPT3 D e b H A1 c Lp x B A L E L2 l2 l1 b5e BA Pattern of terminal position areas [Not a recommended pattern of soldering MIN MAX MIN MAX A1 0.00 0.15 0.000 0.006 A2 2.20 2.50 0.087 0.098 b 0.55 0.75 0.022 0.030 b1 5.00 5.30 0.197 0.209 c 0.40 0.60 0.016 0.024 c1 0.40 0.60 0.016 0.024 D 6.30 6.70 0.248 0.264 E 5.40 5.80 0.213 0.228 e HE 9.00 10.00 0.354 0.394 L 2.20 2.80 0.087 0.110 L1 0.80 1.40 0.031 0.055 L2 1.20 1.80 0.047 0.071 Lp 1.00 1.60 0.039 0.063 x - 0.25 - 0.010 MIN MAX MIN MAX b5 - 1.00 - 0.04 b6 - 5.20 - 0.205 ｌ1 - 2.50 - 0.098 ｌ2 - 5.50 - 0.217 ｌ3 - 10.00 - 0.394 DIM MILIMETERS INCHES 0.25 0.010 5.00 0.197 0.75 0.030 2.30 0.091 5.30 0.209 0.90 0.035 DIM MILIMETERS INCHES 13/13 2016.06 - Rev.C
Notice-PGA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved. Notice Precaution on using ROHM Products 1. Our Products are designed and manufac tured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electroni c appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring ex tremely high reliability (such as medical equipment (Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sale s representative in advance. Unless otherwise agreed in writing by ROHM in advance, RO HM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅢ CLASSⅡb CLASSⅢCLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe desi gn against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditio ns, as exemplified below. Accordin gly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of an y ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified bel ow), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products ar e exposed to sea wind or corrosive gases, including Cl 2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (ev en if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short per iod of time, such as pulse. is applied, confirmation of performance characteristics after on-boar d mounting is strongly recomm ended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temper ature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperat ure is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for fa ilure induced under deviant condi tion from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlori ne, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be us ed on a surface-mount products, the flow soldering method must be used on a through hole mount products. If the flow sol dering method is preferred on a surface-mount products, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification 2016
Notice-PGA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved. Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, pl ease allow a sufficient margin c onsidering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, re ference designs, and associated data and in formation contained in this document are presented only as guidance for Products use. Theref ore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding t he Products maximum rating will not be applied to Products. Please take special care under dry condit ion (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriora te if the Products are stored in the places where: [a] the Products are exposed to sea winds or corros ive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to di rect sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage c ondition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm sol derability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the co rrect direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a hum idity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contain ed in this document is for reference only. ROHM does not warrant that foregoi ng information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whol e or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any wa y whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, incl uding but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. 2016
Notice – WE Rev.001 © 2015 ROHM Co., Ltd. All rights reserved. General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for failure, malfunction or acci dent arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or concerning such information. 2016