PTZ3.6B

PTZ4.7B_1 ROHM

Document overview

• Manufacturer or author: ROHM CO., LTD.
• PDF pages: 5

Technical content

PTZ4.7B Diodes Rev.E 1/4 Zener diode PTZ4.7B zApplications zDimensions(Unit : mm) zLand size figure (Unit : mm) Voltage regulation 㪧㪤㪛㪪 㪉㪅㪇 㪋㪅㪉 㪉㪅㪇 Symbol Unit Pm Tj 㷄 Tstg 㷄 Parameter W unction temperature torage temperature ower dissipation Limits 150 -55 to +150 1000 J S P zFeatures 1) Small power mold type. (PMDS) 2) High ESD tolerance zConstruction Silicon epitaxial planar zStructure 㪩㪦㪟㪤㩷㪑㩷㪧㪤㪛㪪 㪡㪜㪛㪜㪚㩷㪑㩷㪪㪦㪛㪄㪈㪇㪍 㽲 㪤㪸㫅㫌㪽㪸㪺㫋㫌㫉㪼㩷㪛㪸㫋㪼㽳 㽲㽳 㪜㪯㪅㩷㩷㪧㪫㪱㪈㪇㪙 㪇㪅㪈㫧㪇㪅㪇㪉 䇭䇭䇭㩷㪇㪅㪈 㪉㪅㪍㫧㪇㪅㪉 㪉㪅㪇㫧㪇㪅㪉 㪌㪅㪇㫧㪇㪅㪊 㪈㪅㪉㫧㪇㪅㪊 㪋㪅㪌㫧㪇㪅㪉 㪈㪅㪌㫧㪇㪅㪉 zTaping dimensions (Unit : mm) 㪋㪅㪇㫧㪇㪅㪈㪉㪅㪐㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㪉㪅㪇㫧㪇㪅㪇㪌 㱢㪈㪅㪌㪌㫧㪇㪅㪇㪌 㪌㪅㪌㫧㪇㪅㪇㪌 㪈㪅㪎㪌㫧㪇㪅㪈 㪈㪉㫧㪇㪅㪉 㱢㪈㪅㪌㪌 㪐㪅㪌㫧㪇㪅㪈 㪇㪅㪊 㪌㪅㪊㫧㪇㪅㪈 䇭㩷㩷㩷㩷㩷㩷㪇㪅㪇㪌 㪉㪅㪏㪤㪘㪯 zAbsolute maximum ratings (Ta=25qC)

PTZ4.7B Diodes Rev.E 2/4 zElectrical characteristics(Ta=25qC) ϧ)The zener voltage(Vz) is measured 40ms after power is supplied. Ϩ)The operating resistances(Zz,Zzk) are measured by superimposing a minute alternating current on the regulated current(Iz) ESD breakdown voltage䋺 ESD(kV) 30kV C=150pF R=330ȍ forward and reverse: 10 times Temperature coeficiency䋺 *Ȗz(mV/㷄) TYP. Symbol Zener voltage䋺Vz(V) Operating resistance䋺 Zz(ȍ) Reverse current䋺 IR(μA) PT PT PT PT PT PT PT PT PT PT PTZ 1 PTZ 1 PTZ 1 PTZ 1 PTZ 1 PTZ 1 PTZ 1 PTZ 2 PTZ 2 PTZ 2 PTZ 2 PTZ 3 PTZ 3 PTZ 3 zMarking (TYPE NO.) TYPE TYPE䇭NO. TYPE TYPE䇭NO. TYPE 㪫㪰㪧㪜䇭㪥㪦㪅 PTZ̛3.6B 3.6B PTZ̛8.2B 8.2B PTZ̛20B 20B PTZ̛3.9B 3.9B PTZ̛9.1B 9.1B PTZ̛22B 22B PTZ̛4.3B 4.3B PTZ̛10B 10B PTZ̛24B 24B PTZ̛4.7B 4.7B PTZ̛11B 11B PTZ̛27B 27B PTZ̛5.1B 5.1B PTZ̛12B 12B PTZ̛30B 30B PTZ̛5.6B 5.6B PTZ̛13B 13B PTZ̛33B 33B PTZ̛6.2B 6.2B PTZ̛15B 15B PTZ̛36B 36B PTZ̛6.8B 6.8B PTZ̛16B PTZ̛7.5B 7.5B PTZ̛18B 18B 16B

PTZ4.7B Diodes Rev.E 3/4 zElectrical characteristic curves(Ta=25qC) 㪧㪦㪮㪜㪩㩷㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪻㩿㫄㪮㪀 㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀 㪧㪩㪪㪤㪄㪫㪠㪤㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿䋦㪆㷄㪀 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀 㱏㫑㪄㪭㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪩㪜㪭㪜㪩㪪㪜㩷㩷㩷㪪㪬㪩㪞㪜㩷㪤㪘㪯㪠㪤㪬㪤 㪧㪦㪮㪜㪩㪑㪧㪩㪪㪤㩿㪮㪀 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪩㫋㪿㩿㫁㪄㪸㪀 㪩㫋㪿㩿㫁㪄㪺㪀 㪈㫄㫊 㪠㪤㪔㪈㪇㫄㪘 㪠㪝㪔㪈㪇㪇㫄㪘 㪊㪇㪇㫌㫊 㫋㫀㫄㪼 Mounted on epoxy board 㪇 㪉㪇㪇 㪋㪇㪇 㪍㪇㪇 㪏㪇㪇 㪈㪇㪇㪇 㪈㪉㪇㪇 㪇 㪉㪌 㪌㪇 㪎㪌 㪈㪇㪇 㪈㪉㪌 㪈㪌㪇 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪈㪇㪇㪇㪇 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㫋 㪧㪩㪪㪤 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪇 㪌 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪊㪇 㪊㪌 㪋㪇 㪋㪌 㪊㪅㪍 㪉㪋㪉㪇㪈㪏㪈㪍㪈㪌㪈㪊㪈㪉㪈㪈㪈㪇㪐㪅㪈㪏㪅㪉㪎㪅㪌㪌㪅㪍 㪍㪅㪏㪍㪅㪉㪌㪅㪈 㪋㪅㪎 㪋㪅㪊 㪊㪅㪐 㪊㪍㪊㪇㪉㪎 㪊㪊㪉㪉 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪄㪇㪅㪇㪏 㪄㪇㪅㪇㪍 㪄㪇㪅㪇㪋 㪄㪇㪅㪇㪉 㪇 㪇㪅㪇㪉 㪇㪅㪇㪋 㪇㪅㪇㪍 㪇㪅㪇㪏 㪇㪅㪈 㪇㪅㪈㪉 㪇 㪈 㪇㪉 㪇㪊 㪇㪋 㪇 㪄㪌 㪇 㪌 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪊㪇 㪊㪌 㪋㪇 㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀 㪧㪻㪄㪫㪸䇭㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿㫄㪭㪆㷄㪀

PTZ4.7B Diodes Rev.E 4/4 㪈㪇㪇 㪈㪇㪇㪇 㪈㪇㪇㪇㪇 㪇 㪇㪅㪉 㪇㪅㪋 㪇㪅㪍 㪇㪅㪏 㪈 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪱㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪛㪰㪥㪘㪤㪠㪚㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪱㫑㩿㱅㪀 㪽㪔㪈㪤㪟䌺 㪇㪅㪇㪇㪇㪈 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪇 㪇㪅㪈 㪇㪅㪉 㪇㪅㪊 㪇㪅㪋 㪇㪅㪌 㪇㪅㪍 㪇㪅㪎 㪇㪅㪏 㪇㪅㪐 㪈 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪄㪉㪌㷄 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪈㪌㪇㷄 㪇 㪇㪅㪈 㪇㪅㪉 㪇㪅㪊 㪇㪅㪋 㪇㪅㪌 㪇㪅㪍 㪇㪅㪎 㪇㪅㪏 㪇㪅㪐 㪈 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪈㪅㪇㪭 㫅㪔㪊㪇㫇㪺㫊 㪘㪭㪜㪑㪇㪅㪈㪈㪐㫅㪘 㪈㪇㪇㪇 㪈㪇㪈㪇 㪈㪇㪉㪇 㪈㪇㪊㪇 㪈㪇㪋㪇 㪈㪇㪌㪇 㪈㪇㪍㪇 㪈㪇㪎㪇 㪈㪇㪏㪇 㪈㪇㪐㪇 㪈㪈㪇㪇 㪘㪭㪜㪑㪈㪇㪎㪇㪅㪇㫇㪝 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪇㪈㪉㪊㪋㪌㪍 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪈㪌㪇㷄 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪄㪉㪌㷄 㪋㪅㪎 㪋㪅㪏 㪋㪅㪐 㪌 㪌㪅㪈 㪌㪅㪉 㪘㪭㪜㪑㪋㪅㪐㪉㪋㪭 㪫㪸㪔㪉㪌㷄 㪠㪱㪔㪋㪇㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪈㪇㪇㪇㪇 㪇㪅㪈 㪈 㪈㪇

No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. Appendix1-Rev2.0 Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co.jpwww.rohm.com Copyright © 2007 ROHM CO.,LTD. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix