Datasheet - BTW69-800 - 50 A 800 V SCR in TOP3 insulated
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 9
Technical content
Features
- Max. repetitive blocking voltage = VDRM, VRRM = 800 V
- IGT maximum = 80 mA
- ECOPACK®2 component (RoHS and HF compliance)
- Complies with UL 1557 standard (File ref : E81734) Application
- Solid state relays
- Welding equipment
- High power motor control
- Heating systems
- Controlled AC/DC bridge
Description
Available in a high power package TOP3-I, the BTW69-800 is suitable in applications where power handling and power dissipation are critical, such as solid state relays, welding equipment, high power motor control and power converters. This device offers a superior performance in surge current handling capabilities, allowing usage in industrial environment. Thanks to its internal ceramic pad, it provide high voltage insulation (2500VRMS), complying with UL standards (file ref: E81734). TOP3 Isolated A K G A K G Product status link BTW69-800 Product summary IT(RMS) 50 A VDRM/VRRM 800 V IGT 80 mA
50 A 800 V SCR in TOP3 insulated
DS13093 - Rev 2 - July 2023 For further information contact your local STMicroelectronics sales office.
1 Characteristics
Table 1. Absolute maximum ratings Table 2. Electrical characteristics (Tj = 25°C, unless otherwise specified) Table 3. Thermal resistance
1.1 Characteristics (curves)
Figure 1. Maximum average power dissipation versus Figure 2. Average on-state current versus case Figure 3. Relative variation of thermal impedance versus Figure 4. Relative variation of gate trigger current, holding Figure 5. Surge peak on-state current versus number of Figure 6. Non repetitive surge peak on-state current for a
Figure 7. On-state characteristics (maximum values)
2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 TOP3 Ins. package information
- ECOPACK (lead-free plating and halogen free package compliance)
- Lead-free package leads finishing
- Halogen-free molding compound resin meets UL94 standard level V0
- Recommended torque: 1.05 N·m (max. torque: 1.2 N·m)
Figure 8. Package outline
Package information
Table 4. Mechanical data
- Inches given for reference only
3 Ordering information
Figure 9. Ordering information scheme Table 5. Ordering information
Ordering information
Revision history
Table 6. Document revision history 09-Sep-2019 1 Initial release. 27-Jul-2023 2 Updated Table 4. Mechanical data.
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2023 STMicroelectronics – All rights reserved BTW69-800 DS13093 - Rev 2 page 9/9