Datasheet - BTW69-1200N - 50 A – 1200 V non insulated SCR thyristor
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 9
Technical content
Features
- On-state rms current: 50 A
- Blocking voltage: 1200 V
- Gate current: 50 mA Application
- Solid state relays
- Battery charging system
- Uninterruptible power supply
- Variable speed motor drive
- Industrial welding systems
- By pass AC switch
Description
Available in non insulated TOP3 high power package, the BTW69-1200N is suitable for applications where power switching and power dissipation are critical, such as by- pass switch, controlled AC rectifier bridge, in solid state relay, battery charger, uninterruptible power supply, welding equipment and motor driver applications. Based on a clip assembly technology, the BTW69-1200N offers a superior performance in surge current handling and thermal cooling capabilities. Product status link BTW69-1200N Product summary IT(RMS) 50 A VDRM/VRRM 1200 V IGT 50 mA
50 A – 1200 V non insulated SCR thyristor
DS9690 - Rev 2 - July 2023 For further information contact your local STMicroelectronics sales office.
1 Characteristics
Table 1. Absolute maximum ratings
100 A/µs
Table 2. Electrical characteristics (Tj = 25°C, unless otherwise specified) Table 3. Thermal resistance
1.1 Characteristics (curves)
Figure 1. Maximum average power dissipation versus Figure 2. Correlation between maximum average power Figure 3. Average and DC on-state current versus case Figure 4. Average and DC on-state current versus ambient Figure 5. Relative variation of thermal impedance versus Figure 6. Relative variation of gate trigger current and
2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 TOP3 Ins. package information
- Epoxy meets UL94, V0
- Lead-free packages
- Recommended torque: 1.05 N·m (max. torque: 1.2 N·m)
Figure 13. TOP3 insulated and non-insulated package outline
Package information
Table 4. TOP3 insulated and non-insulated mechanical data
- Inches given for reference only
3 Ordering information
Figure 14. Ordering information scheme Table 5. Ordering information
Ordering information
Revision history
Table 6. Document revision history 14-Jun-2013 1 Initial release. 13-Jul-2023 2 Updated Table 4.
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2023 STMicroelectronics – All rights reserved BTW69-1200N DS9690 - Rev 2 page 9/9