BA2115FJ-E2

BA2115FJ ROHM

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 29

Technical content

• General Description BA2107/BA2115 are single and dual operational amplifier with high gain and high slew rate(4v/µs). BA2107/BA2115 has good performance of input referred noise voltage(7 HznV/ ) and total harmonic distortion(0.008%). These are suitable for Audio applications.
• Features  High voltage gain, low noise, low distortion  L ow input referred noise voltage  Low distortion  Wide operating supply voltage  I nternal ESD protection circuit
• Application  Audio application  Potable equipment  C onsumer electronics
• Packages W(Typ.)xD(Typ.) xH(Max.) SSOP5 2.90mm x 2.80mm x 1.25mm SOP8 5.00mm x 6.20mm x 1.71mm SOP-J8 4.90mm x 6.00mm x 1.65mm MSOP8 2.90mm x 4.00mm x 0.90mm
• Key Specification  Wide Operating Supply Voltage (split supply): ±1.0V to ±7.0V  Operating Temperature Range: -40°C to +85°C  High Slew Rate: 4V/ µs(Typ.)  Total Harmonic Distortion : 0.008%(Typ.)  Input Referred Noise Voltage : 7 HznV/ (Typ.)
• Block Diagrams ○Product structure：Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays. －IN ＋IN VOUT VCC VEE

Figure 1. Simplified schematic

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx

• Pin Configuration(TOP VIEW) SSOP5 Pin No. Symbol 1 +IN1

2 VEE

4 OUT

5 VCC

SOP8, SOP-J8, MSOP8 Pin No. Symbol

1 OUT1

4 VEE

7 OUT2

8 VCC

BA2107G BA2115F BA2115FJ BA2115FVM

• Ordering Information B A 2 1 x x x x x - x x Part Number BA2107G BA2115xxx Package G : SSOP 5 F : SOP8 FJ : SOP-J8 FVM : MSOP8 Packaging and forming specification E2: Embossed tape and reel (SOP8/SOP-J8) TR: Embossed tape and reel (SSOP5/MSOP8)
• Line-up Topr Operating Supply Voltage (split supply) Supply Current (Typ.) Slew Rate (Typ.) Package Orderable Part Number -40°C to +85°C ±1.0V to ±7.0V 3.5mA 4V/µs SSOP5 Reel of 3000 BA2107G-TR SOP8 Reel of 2500 BA2115F-E2 SOP-J8 Reel of 2500 BA2115FJ-E2 MSOP8 Reel of 3000 BA2115FVM-TR 4 5 3 6 2 7 1 8 CH1 - + CH2 + - OUT1 -IN1 +IN1 VEE OUT2 -IN2 +IN2 VCC 3 4 1 5 OUT +IN -IN VEE VCC

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx

• Absolute Maximum Ratings (Ta=25℃) ○BA2107, BA2115 Parameter Symbol Ratings Unit Supply Voltage VCC-VEE +14 V Power dissipation Pd SSOP5 675*1*4 mW SOP8 780*2*4 SOP-J8 675*1*4 MSOP8 590*3*4 Differential Input Voltage *5 Vid +14 V Input Common-mode Voltage Range Vicm (VEE-0.3) to VEE+14 V Operating Supply Voltage Vopr 2 to 14(±1 to ±7) V Operating Temperature Topr -40 to +85 ℃ Storage Temperature Tstg -55 to 150 ℃ Maximum Junction Temperature Tjmax +150 ℃ Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out absolute maximum rated temperature environment may cause deterioration of characteristics. *1 To use at temperature above Ta＝25 ℃ reduce 5.4mW/℃ *2 To use at temperature above Ta＝25 ℃ reduce 6.2mW/℃ *3 To use at temperature above Ta＝25 ℃ reduce 4.8mW/℃ *4 Mounted on a FR4 glass epoxy PCB(70mm×70mm×1.6mm). *5 The voltage difference between inverting input and non-inverting input is the differential input voltage. T hen input terminal voltage is set to more than VEE.
• Electrical Characteristics ○BA2107 (Unless otherwise specified VCC=+2.5V, VEE=-2.5V, Ta=25℃) Parameter Symbol Limits Unit Condition Min. Typ. Max. Input Offset Voltage *6 Vio - 1 6 mV VOUT=0V, Vicm=0V Input Offset Current *6 Iio - 2 200 nA VOUT=0V, Vicm=0V Input Bias Current *7 Ib - 150 400 nA VOUT=0V, Vicm=0V Supply Current ICC - 1.8 3.0 mA Av=0dB, RL=∞, VIN+=0V Maximum Output Voltage(High) VOH 4.5 4.8 - V RL≧2.5kΩ, VOHmin=VCC-0.5V - 11.6 - RL≧10kΩ, VCC=12V, VEE=0V VRL=6V, VOH=VCC-0.4V - 15.5 - RL≧10kΩ, VCC=16V, VEE=0V VRL=8V, VOH=VCC-0.5V Maximum Output Voltage(Low) VOL 0.5 0.2 - V RL≧2.5kΩ, VOLmin=VEE+0.5V - 0.4 - RL≧10kΩ, VCC=12V, VEE=0V VRL=6V, VOL=VEE+0.4V - 0.5 - RL≧10kΩ, VCC=16V, VEE=0V VRL=8V, VOL=VEE+0.5V Output Source Current Isource - 1.4 - mA - Output Sink Current Isink - 90 - mA - Large Signal Voltage Gain Av 60 80 - dB RL≧10kΩ, VOUT=2.5±2V Vicm=2.5V Input Common-mode Voltage Range Vicm 1.0 - 4.0 V VEE1.0V to VCC-1.0V Common-mode Rejection Ratio CMRR 60 74 - dB Vicm=1.0V to 4.0V Power Supply Rejection Ratio PSRR 60 80 - dB VCC=2V to 16V Slew Rate SR - 4 - V/μs Av=0dB, VIN=2VP-P Gain Bandwidth Product GBW - 12 - MHz f=10kHz Unity Gain Frequency fT - 3.4 - MHz 0dB cross frequency Input Referred Noise Voltage Vn - 7 - HznV/ Rg=600Ω, DIN-AUDIO - 0.9 - μVrms Rg=600Ω, DIN-AUDIO Total Harmonic Distortion THD+N - 0.008 - ％ Av=20dB, f=1kHz, DIN-AUDIO *6 Absolute value *7 Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC.

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx ○BA2115 (Unless otherwise specified VCC=+2.5V, VEE=-2.5V, Ta=25℃) Parameter Symbol Limits Unit Condition Min. Typ. Max. Input Offset Voltage *8 Vio - 1 6 mV VOUT=0V, Vicm=0V Input Offset Current *8 Iio - 2 200 nA VOUT=0V, Vicm=0V Input Bias Current *9 Ib - 150 400 nA VOUT=0V, Vicm=0V Supply Current ICC - 3.5 5 mA RL=∞, All Op-Amps, VIN+=0V Maximum Output Voltage(High) VOH 4.5 4.8 - V RL≧2.5kΩ, VOHmin=VCC-0.5V - 11.6 - RL≧10kΩ, VCC=12V, VEE=0V VRL=6V, VOH=VCC-0.4V - 15.5 - RL≧10kΩ, VCC=16V, VEE=0V VRL=8V, VOH=VCC-0.5V Maximum Output Voltage(Low) VOL 0.5 0.2 - V RL≧2.5kΩ, VOLmin=VEE+0.5V - 0.4 - RL≧10kΩ, VCC=12V, VEE=0V VRL=6V, VOL=VEE+0.4V - 0.5 - RL≧10kΩ, VCC=16V, VEE=0V VRL=8V, VOL=VEE+0.5V Output Source Current Isource - 1.4 - mA - Output Sink Current Isink - 90 - mA - Large Signal Voltage Gain Av 60 80 - dB RL≧10kΩ VOUT=±2V, Vicm=0V Input Common-mode Voltage Range Vicm ±1.5 - - V - Common-mode Rejection Ratio CMRR 60 74 - dB Vicm=-1.5V to +1.5V Power Supply Rejection Ratio PSRR 60 80 - dB VCC=+2V to +14V Slew Rate SR - 4 - V/μs Av=0dB, VIN=±1V Gain Bandwidth Product GBW - 12 - MHz f=10kHz Unity Gain Frequency fT - 3.4 - MHz 0dB cross frequency Input Referred Noise Voltage Vn - 7 - HznV/ Rg=600Ω, DIN-AUDIO - 0.9 - μVrms Rg=600Ω, DIN-AUDIO Total Harmonic Distortion THD+N - 0.008 - ％ Av=20dB, f=1kHz, DIN-AUDIO Channel Separation CS - 100 - dB Av=40dB *8 Absolute value *9 Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC.

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx Description of electrical characteristics Described here are the terms of electric characteristics used in this datasheet. Items and symbols used are also shown. Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general document. 1. Absolute maximum ratings Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics.

1.1 Power supply voltage (VCC/VEE)

Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power supply terminal without deterioration or destruction of characteristics of internal circuit.

1.2 Differential input voltage (Vid)

Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without deterioration and destruction of characteristics of IC.

1.3 Input common-mode voltage range (Vicm)

Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without deterioration or destruction of characteristics. Input common -mode voltage range of the maximum ratings not assure normal operation of IC. When normal operation of IC is desired, the input common-mode voltage of characteristics item must be followed.

1.4 Power dissipation (Pd)

Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal temperature). As for package product, Pd is determined by the temperature that can be permitted by IC chip in the package (maximum junction temperature)and thermal resistance of the package. 2. Electrical characteristics item

2.1 Input offset voltage (Vio)

Indicates the voltage difference between non- inverting terminal and inverting terminal. It can be translated into the input voltage difference required for setting the output voltage at 0 V.

2.2 Input offset current (Iio)

Indicates the difference of input bias current between non-inverting terminal and inverting terminal.

2.3 Input bias current (Ib)

Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at non-inverting terminal and input bias current at inverting terminal.

2.4 Input common-mode voltage range(Vicm)

Indicates the input voltage range where IC operates normally.

2.5 Large signal voltage gain (Av)

Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal and Inverting terminal. It is normally the amplifying rate (gain) with reference to DC voltage. Av = (Output voltage fluctuation) / (Input offset fluctuation)

2.6 Circuit current (ICC)

Indicates the IC current that flows under specified conditions and no-load steady status.

2.7 Maximum Output Voltage(High) / Maximum Output Voltage(Low) (VOH/VOL)

Indicates the voltage range that can be output by the IC under specified load condition. It is typically divided into high-level output voltage and low-level output voltage. High -level output voltage indicates the upper limit of output voltage. Low-level output voltage indicates the lower limit.

2.8 Output source current/ output sink current (Isource/Isink)

The maximum current that can be output under specific output conditions, it is divided into output source current and output sink current. The output source current indicates the current flowing out of the IC, and the output sink current the current flowing into the IC.

2.9 Common-mode rejection ratio (CMRR)

Indicates the ratio of fluctuation of input offset voltage when in- phase input voltage is changed. It is normally the fluctuation of DC. CMRR = (Change of Input common-mode voltage) / (Input offset fluctuation)

2.10 Power supply rejection ratio (PSRR)

Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC. PSRR = (Change of power supply voltage) / (Input offset fluctuation)

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx

2.11 Slew Rate (SR)

SR is a parameter that shows movement speed of operational amplifier. It indicates rate of variable output voltage as unit time.

2.12 Gain Band Width (GBW)

Indicates to multiply by the frequency and the gain where the voltage gain decreases 6dB/octave.

2.13 Unity gain frequency (fT)

Indicates a frequency where the voltage gain of operational amplifier is 1.

2.14 Total harmonic distortion + Noise (THD+N)

Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage of driven channel.

2.15 Input referred noise voltage (Vn)

Indicates a noise voltage generated inside the operational amplifier equivalent by ideal voltage source connected in series with input terminal.

2.16 Channel separation (CS)

Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage of driven channel.

• Application Information NULL method condition for Test Circuit 1 VCC, VEE, EK, Vicm Unit: V Parameter VF S1 S2 S3 VCC VEE EK Vicm calculation Input Offset Voltage VF1 ON ON OFF 2.5 -2.5 0 0 1 Input Offset Current VF2 OFF OFF OFF 2.5 -2.5 0 0 2 Input Bias Current VF3 OFF ON OFF 2.5 -2.5 0 0 3 VF4 ON OFF Large Signal Voltage Gain VF5 ON ON ON 2.5 -2.5 -1.0 0 VF6 1.5 -2.5 1.0 0 Common-mode Rejection Ratio (Input common-mode Voltage Range) VF7 ON ON OFF 1.5 -3.5 -1.0 0 VF8 3.5 -1.5 1.0 0 Power Supply Rejection Ratio VF9 ON ON OFF 0.75 -1.25 0 0 VF10 7.0 -7.0 0 0 -Calculation- 1. Input Offset Voltage (Vio) ] V [Rs / Rf + 1 VF1Vio = 2. Input Offset Current (Iio) ] A [Rs) / Rf + (1 × Ri VF1 - VF2 Iio= 3. Input Bias Current (Ib) ] A [Rs) / Rf + (1 × Ri × 2 VF3 - VF4 Ib= 4. Large Signal Voltage Gain (Av) ]dB[VF6 - VF5 Rf/Rs) + (1 × EKLog×20 Av Δ= 5. Common-mode Rejection Ration (CMRR) ]dB[VF7 - VF8 Rf/Rs) + (1 × VicmLog×20 CMRR Δ= 6. Power supply rejection ratio (PSRR) ]dB[VF9 - VF10 Rf/Rs) + (1 × VccLog×20 PSRR Δ= Switch Condition for Test Circuit 2 SW No. SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10 SW11 SW12 SW13 SW14 Supply Current OFF OFF OFF ON OFF ON OFF OFF OFF OFF OFF OFF OFF OFF Maximum Output Voltage(High) OFF OFF ON OFF OFF ON OFF OFF ON OFF OFF OFF ON OFF Maximum Output Voltage(Low) OFF OFF ON OFF OFF ON OFF OFF OFF OFF OFF OFF ON OFF Output Source Current OFF OFF ON OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON Output Sink Current OFF OFF ON OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON Slew Rate OFF OFF OFF ON OFF OFF OFF ON ON ON OFF OFF OFF OFF Gain Bandwidth Product OFF ON OFF OFF ON ON OFF OFF ON ON OFF OFF OFF OFF Equivalent Input Noise Voltage ON OFF OFF OFF ON ON OFF OFF OFF OFF ON OFF OFF OFF

Figure 48. Test circuit1 (one channel only)

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx

• Physical Dimensions Tape and Reel Information

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx 0.95 2.4 1.0 0.6 0.95

• Marking Diagrams Product Name Package Type Marking BA2107 G SSOP5 J0 BA2115 F SOP8

2115 FJ SOP-J8

• Land pattern data all dimensions in mm PKG Land pitch e Land space MIE Land length ≧ℓ 2 Land width SSOP5 0.95 2.4 1.0 0.6 SOP8 1.27 4.60 1.10 0.76 SOP-J8 1.27 3.90 1.35 0.76 MSOP8 0.65 2.62 0.99 0.35 SOP8(TOP VIEW) Part Number Marking LOT Number 1PIN MARK SSOP5(TOP VIEW) Part Number Marking LOT Number MSOP8(TOP VIEW) Part Number Marking LOT Number 1PIN MARK SOP-J8(TOP VIEW) Part Number Marking LOT Number 1PIN MARK b 2 MIE e SSOP5 SOP8, SOP-J8, MSOP8

www.rohm.com TSZ02201-0RAR1G200090-1-2 TSZ22111･15･00 BA2107G, BA2115xxx

• Revision History Date Revision Changes 2012.10.31 001 New Release

Notice - GE Rev.002 © 2014 ROHM Co., Ltd. All rights reserved. Notice Precaution on using ROHM Products 1. Our Products are designed and manufac tured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electroni c appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring ex tremely high reliability (such as medical equipment (Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sale s representative in advance. Unless otherwise agreed in writing by ROHM in advance, RO HM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅣ CLASS Ⅲ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe desi gn against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditio ns, as exemplified below. Accordin gly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of an y ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified bel ow), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products ar e exposed to sea wind or corrosive gases, including Cl 2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (ev en if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subjec t to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short per iod of time, such as pulse. is applied, confirmation of performance characteristics after on-boar d mounting is strongly recomm ended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temper ature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperat ure is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for fa ilure induced under deviant condi tion from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlori ne, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used; if flow soldering met hod is preferred, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification

Notice - GE Rev.002 © 2014 ROHM Co., Ltd. All rights reserved. Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, pl ease allow a sufficient margin c onsidering variations of the characteristics of the Products and external components, including transient characteri stics, as well as static characteristics. 2. You agree that application notes, re ference designs, and associated data and in formation contained in this document are presented only as guidance for Products use. Theref ore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding t he Products maximum rating will not be applied to Products. Please take special care under dry condit ion (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriora te if the Products are stored in the places where: [a] the Products are exposed to sea winds or corros ive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to di rect sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage c ondition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm sol derability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the co rrect direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a hum idity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since our Products might fall under cont rolled goods prescribed by the applicable foreign exchange and foreign trade act, please consult with ROHM representative in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contain ed in this document is for reference only. ROHM does not warrant that foregoi ng information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. ROHM shall not be in any way responsible or liable for infringement of any intellectual property rights or other damages arising from use of such information or data.: 2. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the information contained in this document. Other Precaution 1. This document may not be reprinted or reproduced, in whol e or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any wa y whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, incl uding but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties.

Notice – WE Rev.001 © 2014 ROHM Co., Ltd. All rights reserved. General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for failure, malfunction or acci dent arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ec t to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or concerning such information.