2SD2211

2SD2211 ROHM

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 4

Technical content

2SD2211 / 2SD1918 / 2SD1857A Transistors Rev.A 1/3 Power Transistor (160V , 1.5A) 2SD2211 / 2SD1918 / 2SD1857A zFeatures 1) High breakdown voltage.(BVCEO = 160V) 2) Low collector output capacitance. (T yp. 20pF at VCB = 10V) 3) High transition frequency.(fT = 80MHZ) 4) Complements the 2SB1275 / 2SB1236A. zAbsolute maximum ratings (Ta = 25°C) Parameter Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits 160 160 1.5 0.5 150 −55 ∼+150 Unit V V V A(DC) ∗1A(Pulse) W W W W

10 W(Tc=25°C)

1 Pw=200msec duty=1/2

2 Printed circuit board 1.7mm thick, collector plating 1cm2 or larger. 3 When mounted on a 40 x 40 x 0.7mm ceramic board. zPackaging specifications and hFE Type 2SD2211 MPT3 QR T100 1000 2SD1918 CPT3 QR TL 2500 2SD1857A ATV PQ TV2 2500 DQ* −− Denotes hFE Package hFE Code Basic ordering unit (pieces) Marking zExternal dimensions (Unit : mm) ROHM : MPT3 EIAJ : SC-62 EIAJ : SC-63 ROHM : CPT3 ROHM : ATV 2SD1857A 2SD1918 2SD2211 1.5 (1) Base(Gate) 0.4 (2) Collector(Drain) (3) Emitter(Source) 1.5 0.4 1.6 0.5 3.0 0.4 1.5 (3) 4.5 (1) (2) 0.5 4.0 2.51.0 0.45 (2) Collector 1.05 (3) Base Taping specifications (1) Emitter 0.5 (1) 0.65Max. 2.54 (2) 2.54 (3) 6.8 1.0 14.5 0.9 4.4 2.5 2.3 0.5 1.0 0.5 9.5 2.5 0.8Min. 1.5 6.5 2.3 (2)(3) C0.5 0.65 0.9 (1) 0.75 2.3 0.9 1.55.5 (3) Emitter(Source) (2) Collector(Drain) (1) Base(Gate) 5.1 zElectrical characteristics (Ta = 25°C) Parameter Symbol Min. Typ. Max. Unit Conditions BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) fT Cob 160 160 120 390 V V V µA µA V hFE 82 − 270 − 2SD2211,2SD1918 2SD1857A MHz pF IC = 50µA IC = 1mA IE = 50µA VCB = 120V VEB = 4V IC/IB = 1A/0.1A VBE(sat) − 1.5 V IC/IB = 1A/0.1A VCE/IC = 5V/0.1A VCE = 5V , IE = −0.1A , f = 30MHz VCB = 10V , IE = 0A , f = 1MHz Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Base-emitter saturation voltage Measured using pulse current.∗

2SD2211 / 2SD1918 / 2SD1857A Transistors Rev.A 2/3 zElectrical characteristic curves Ta=25°C 0 1 2 345 0.2 0.4 0.6 0.8 1.0 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR CURRENT : IC (A) Fig.1 Ground emitter output characteristics 10mA 9mA 7mA 6mA 5mA 4mA 3mA 2mA IB=1mA 8mA VCE=5V BASE TO EMITTER VOLTAGE : VBE (V) Fig.2 Ground emitter propagation characteristics COLLECTOR CURRENT : IC (A) 0.02 0.05 0.1 0.2 0.5 0.01 Ta=100°C Ta=25°C Ta= −25°C Ta=25°C 1000 500 200 100 COLLECTOR CURRENT : IC (A) DC CURRENT GAIN : hFE Fig.3 DC current gain vs. collector current ( Ι ) VCE=10V IC/IB=10 0.2 0.5 0.1 0.01 0.02 0.05 COLLECTOR CURRENT : IC (A) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) BASE SATURATION VOLTAGE : VBE(sat) (V) Fig.6 Collector-emitter saturation voltage Base-emitter saturation voltage vs. collector current Ta= −25°C 25°C −25°C VBE(sat) VCE(sat) 100°C Ta=25°C 0.2 0.5 0.1 0.01 0.02 0.05 COLLECTOR CURRENT : IC (A) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Fig.5 Collector-emitter saturation voltage vs. collector current IC/IB=20 VCE=5V 1000 500 200 100 COLLECTOR CURRENT : IC (A) VCE=5V 1000 500 200 100 EMITTER CURRENT : IE (mA) TRANSITION FREQUENCY : fT (MHz) Fig.7 Gain bandwidth products vs. emitter current Ta=25°C DC CURRENT GAIN : hFE Fig.4 DC current gain vs. collector current ( ΙΙ ) Ta=100°C 25°C −25°C f=1MHz IE=0A 0.1 0.2 0.5 1 2 5 10 20 50 100 1000 500 200 100 COLLECTOR TO BASE VOLTAGE : VCB (V) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) Fig.8 Collector output capacitance vs. collector-base voltage Ta=25°C Ta=25°C ∗Single nonrepetitive pulse COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.9 Safe operating area (2SD2211) COLLECTOR CURRENT : IC (A) 0.1 0.2 0.5 2 5 10 20 50 100 200 500 1000 200m 500m 100m 10m 20m 50m Recommended land Ic Max (Pulse∗) Pw=100ms Pw=10ms DC

2SD2211 / 2SD1918 / 2SD1857A Transistors Rev.A 3/3 Ta=25°C ∗Single nonrepetitive pulse COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.10 Safe operating area (2SD1918) COLLECTOR CURRENT : IC (A) 0.1 0.2 0.5 21 5 10 20 50 100 200 500 1000 200m 500m 100m 10m 20m 50m Ic Max (Pulse∗) DC Pw=100ms Pw=10ms

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.