2SD1963 ROHM
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
Rev.A 1/2 Power transistor (50V, 3A) 2SD1963 zFeatures zExternal dimensions (Unit : mm) 1) Low saturation voltage, typically (1)Base (2)Collector (3)Emitter 1.5 0.4 1.6 0.5 3.0 0.40.4 1.51.5 (3)(2)(1) 4.5 0.5 4.0 2.51.0 2) Excellent DC current gain characteristics. 3) Complements the 2SB1308. zAbsolute maximum ratings (Ta=25°C) Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature ∗1 Single pulse, Pw=10ms ∗2 When mounted on a 40×40×0.7mm ceramic board. Parameter VCBO VCEO VEBO PC Tj Tstg 50 V V V A(DC) IC A(Pulse)5 ∗1 0.5 2.0 W W 150 −55 to 150 Symbol Limits Unit zElectrical characteristics (Ta=25°C) Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage Output capacitance ∗ Measured using pulse current. Parameter Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE VCE(sat) fT Cob Min. 180 − ∗ 150 0.25 0.5 0.5 560 0.45 VI C=50µA IC= 1mA IE= 50µA VCB=40V VEB=5V VCE=2V, IC=0.5A IC/IB=1.5A/ 0.15A VCE=6V, IE= −50mA, f=100MHz VCB=20V, IE=0A, f=1MHz V V µA µA V MHz pF Typ. Max. Unit Conditions Transition frequency
Rev.A 2/2 zPackaging specifications and hFE Marking Code 2SD1963 RS DG∗ Basic ordering unit (pieces) hFE T100 1000 Type ∗ Denotes hFE zElectrical characteristic curves Fig.1 Grounded emitter propagation characteristics COLLECTOR CURRENT : IC (A) BASE TO EMITTER VOLTAGE : VBE (V) 0.01 0.02 0.2 0.1 0.05 0.5
5 VCE= −2V
25°C −25°C Ta=100°C Fig.2 DC current gain vs. collector current DC CURRENT GAIN : hFE COLLECTOR CURRENT : IC (A) VCE=2V 1m 5m 0.01 0.05 1 2 5 102m 100 200 500 1000 2000 5000 0.02 0.1 0.50.2 25°C −25°C Ta=100°C Fig.3 Collector-emitter saturation voltage vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR CURRENT : IC (A) Ta= −25°C Ta=100°C Ta= 25°C lC/lB=40 0.01 0.5 0.2 0.1 0.05 0.02
Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.