2SC5053 ROHM
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
Rev.A 1/2 Medium power transistor (50V, 1A) 2SC5053 zFeatures 1) Low saturation voltage, typically VCE(sat) = 0.12V at IC / IB = 500mA / 50mA 2) PC=2W (on 40×40×0.7mm ceramic board) 3) Complements the 2SA1900 zExternal dimensions (Unit : mm) MPT3 (1)Base (2)Collector (3)Emitter 1.5 0.4 1.6 0.5 3.0 0.40.4 1.51.5 (3)(2)(1) 4.5 0.5 4.0 2.51.0 z Absolute maximum ratings (Ta=25°C) Parameter Collector-base voltage Collector-emitter voltage Emitter- base voltage Collector power dissipation Collector current Collector power dissipation Storage temperature Symbol Limits −60 −50 0.5 150 −55 to +150 Unit V V V A −2 A (Pulse) W W ∗1 Single pulse Pw=100ms, Duty=1/2 ∗2 When mounted on a 40 40 0.7mm seramic board. VCBO VCEO VEBO IC PC Tj Tstg + + zExternal dimensions (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Conditions Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Cob −60 −50 120 150 −0.1 −0.5 −0.4 270 V V V µA µA V MHz pF IC = −50µA IC = −1mA IE = −50µA VCB = −40V VEB = −4V IC/IB = −500mA/−50mA VCE/IC = −3V/−0.5A VCE = −5V , IE = 50mA , f=100MHz VCB = −10V , IE = 0A , f=1MHz BVCBO BVCEO BVEBO ICBO IEBO hFE fT VCE(sat) zPackaging specifications and hFE Type Package hFE Code Basic ordering unit (pleces) 2SC5053 MPT3 QR T100 Marking CG 1000 ∗ Denotes hFE
Rev.A 2/2 zElectric characteristics curves Fig.1 Grounded emitter output characteristics COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR CURRENT : IC (mA) 12 3 4 50 800 900 1000 600 700 300 400 500 200 100 10mA 9mA 8mA 7mA 6mA 5mA 4mA 3mA IB=1mA 2mA Fig.2 DC current gain vs. collector current COLLECTOR CURRENT : IC (A) DC CURRENT GAIN : hFE 100 200 500 1000 VCE=3V Ta=25°C Fig.3 Collector-emitter saturation voltage vs.collector current COLLECTOR CURRENT : IC (A) COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV) 100m1m 10m 1 2 100 200 500 1000 Ta=25°C IC/IB=10 1000TRANSITION FREQUENCY : fT (MHz) −1−0.1−10m−1m 100 200 500 EMITTER CURRENT : IE (A) Fig.4 Gain bandwith product vs. emitter current Ta=25°C VCE=5V Ta=25°C f=1MHz IE=0A Fig.5 Collector output capacitance vs. collector-base voltage COLLECTOR TO BASE VOLTAGE : VCB (V) COLLECTOR OUTPUT CAPACITANCE : Cob( (pF) 0.1 0.2 0.5 1 2025 10 100 200 Fig.6 Safe operating area COLLECTOR TO EMITTER VOLTAGE : ICE (V) COLLECTOR CURRENT : IC (A) 12 5 10 20 500.2 0.5 100 0.1 0.2 0.5 0.05 0.01
0.02 Ta=25°C
∗Single nonrepeatitive pulse 10ms 100ms DC IC Max. (Pulse )∗
Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.