ZA016SDMT1 overview
ZA016SDMT1 is a component documented by Mallory Sonalert Produc. The PDF description identifies it as "Recommended hole size is 22.5 mm. Thread front will fit standard 22.5mm hole." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Mallory Sonalert Produc...
- Part number: ZA016SDMT1
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- cUL Recognition cUL Recognized Operating Temperature -30° to +65° C Panel Mounting: Recommended hole size is 22.5 mm.
- Thread front will fit standard 22.5mm hole.
- Current Draw: 40mA MAX Housing Material: 6/6 Nylon, Color: Black Storage Temperature: -40° to +80° C Voltage Rating: 6 to 16 VDC Frequency: 3900 ± 500 Hz 3900 ± 500 Hz 3900 ± 500 Hz 4500-3200 Hz Connection: "+" to Positive, "-" to Ground t.
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the ZA016SDMT1 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=za016sdmt1-mallory-sonalert-produc