Z8018006FEC overview
Z8018006FEC is a component documented by Zilog, Inc. The PDF description identifies it as "ENHANCED Z180 MICROPROCESSOR." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Zilog, Inc.
- Part number: Z8018006FEC
- Category: Microcontroller
- Datasheet length: 70 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- This provides a systems cost savings by allowing the use of lower cost, lower frequency crystals instead of the higher cost, and higher speed oscillators.
- The frequency of this output is equal to one- half that of the crystal or input clock frequency. /CTS0 - /CTS1.
- All voltages are referenced to GND (0V).
- All AC parameters assume a load capacitance of 100 pF.
- AC Load Capacitance Parameters** Enhanced Z180 Microprocessor Zilog 1-24 P R E L I M I N A R Y DS971800401 DC CHARACTERISTICS Note: Vcc = 5V + 10%, Vss = 0V over specified temperature range unless otherwise noted.
- Unit VIH1 Input “H” Voltage /RESET, EXTAL, /NMI Vcc -0.6 – V cc +0.3 V VIH2 Input “H” Voltage Except /RESET, EXTAL, /NMI 2.0 – V cc +0.3 V VIH3 Input “H” Voltage Except CKS, CKA0, CKA1 2.4 – V cc +0.3 V VIL1 Input “L ” Voltage /RESET, EXTA.
- t AD ØRise to Address Valid Delay – 90 – 80 – 70 ns 7.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- PACKAGE INFORMATION
- ORDERING INFORMATION
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the Z8018006FEC datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=z8018006fec-zilog-inc