Z00607MN overview
Z00607MN is a component documented by STMicroelectronics. The PDF description identifies it as "Standard 0.8 A Triacs 19-Jun-2014." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: STMicroelectronics
- Part number: Z00607MN
- Category: IC
- Datasheet length: 8 Pages
Key features noted in the PDF
- On-state rms current = 0.8 A
- Repetitive peak off-state voltage = 600 V
- Gate triggering current = 5 mA
- minimum I GT is guaranteed at 5% of IGT max.
- for both polarities of A2 referenced to A1.
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Electrical characteristics (Tj = 25 °C, unless otherwise specified)** minimum I GT is guaranteed at 5% of IGT max.
- Mold flas h or protrusions shall not exceed 0.15mm (0.006inches) **Table 6.
Topics covered by the datasheet
The document includes sections related to:
- Z00607_V01 STMICROELECTRONICS
- Features
- Description
Engineering review checklist
- Confirm supply rails, clock limits, memory size, peripheral mapping and I/O voltage compatibility.
- Check package pinout, boot configuration, programming interface and silicon-revision errata.
- Budget decoupling, thermal margin, startup timing and firmware recovery behavior before release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the Z00607MN datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=z00607mn-stmicroelectronics