Z00109A overview
Z00109A is a component documented by Baumer IVO GmbH & Co. K. The PDF description identifies it as "Accessories & Service." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Baumer IVO GmbH & Co. K...
- Part number: Z00109A
- Category: IC
- Datasheet length: 1 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Errors and omissions excepted.30/10/2008 Front panels Front panels Dimensions Part number Z 001.09A Blind front panel 96 x 48 mm 19.7 Blind front panel 96 x 48 mm with 6 mounting clips
Engineering review checklist
- Confirm the exact ordering code, package, pinout or terminal arrangement and document revision.
- Compare recommended operating conditions with absolute maximum ratings and retain adequate design margin.
- Validate electrical, thermal, mechanical and environmental behavior in the final application.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the Z00109A datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=z00109a-baumer-ivo-gmbh-co-k