XPGDWT-B1-0000-00JF7 overview
XPGDWT-B1-0000-00JF7 is a component documented by Cree LED. The PDF description identifies it as "XLamp® XP-G3 LEDs REV 9." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Cree LED
- Part number: XPGDWT-B1-0000-00JF7
- Category: IC
- Datasheet length: 48 Pages
Key features noted in the PDF
- Available in no CRI minimum white, 70-, 80- and 90-CRI white, royal blue & photo red
- Broadcast color option at 5700 K
- ANSI‑compatible chromaticity bins
- 3‑step and 5‑step options
- White binned at 85 °C, royal blue & photo red binned at 25 °C
- Maximum drive current: white, royal blue: 2000 mA, photo red: 1500 mA
- Low thermal resistance: white: 3 °C/W, royal blue: 2 °C/W, photo red (Standard): 2.5 °C/W, photo red (S Line): 1 °C/W
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- Available in no CRI minimum white, 70-, 80- and 90-CRI white, royal blue & photo red Broadcast color option at 5700 K ANSI‑compatible chromaticity bins 3‑step and 5‑step options White binned at 85 °C, royal blue & photo red binned at 25 °C.
- CLD-DS139 REV 9 3 CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point ‑ white °C/W 3 Thermal resistance, junction to solder point ‑ royal blue °C/W 2 Thermal resistance, junction to sol.
- CLD-DS139 REV 9 4 Notes Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements.
- Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only.
- ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (STANDARD) - T J = 85 °C The following table provides order codes for XLamp XP‑G3 White (Standard) LEDs.
- CLD-DS139 REV 9 5 Notes Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements.
- CLD-DS139 REV 9 6 Notes Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements.
Topics covered by the datasheet
The document includes sections related to:
- FEATURES
- Electrical Characteristics
Engineering review checklist
- Check resistance value, tolerance, temperature coefficient and long-term stability over the operating range.
- Derate continuous power for ambient temperature and verify pulse or surge capability separately.
- Match the land pattern, termination finish and current-sense routing to the exact package option.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the XPGDWT-B1-0000-00JF7 datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=xpgdwt-b1-0000-00jf7-cree-led