XC8107BC05ER-G overview
XC8107BC05ER-G is a component documented by Torex Semiconductor. The PDF description identifies it as "85m廓 High Function Power Switch." This guide condenses the most useful engineering information from the available PDF so that designers and sourcing teams can identify the checks that still need confirmation in the original document.
Datasheet snapshot
- Manufacturer: Torex Semiconductor
- Part number: XC8107BC05ER-G
- Category: IC
- Datasheet length: 27 Pages
Specifications and operating details
The following points were extracted from the PDF text. Check the associated conditions, notes and limits in the complete document before using a value in a design.
- The logic level of CE pin is selectable between either one of active high or active low. ■APPLICATIONS Set Top Boxes Digital TVs PCs USB Ports/USB Hubs HDMI ■FEATURES Input Voltage : 2.5V～5.5V Output Current : 2A ON Resistance : 85m Ω@VIN=.
- UNITS CIRCUIT turn-on time t DLY(ON) R LOAD=10Ω, VCE=0V→2.2V - 0.60 1.00 ms ① turn-off time t DLY(OFF) R LOAD=10Ω, VCE=2.2V→0V - 0.08 0.13 ms ① FLG output FET On-resistance RFLG I FLG=10mA, VOUT=5.5V - 15 20 Ω ③ FLG output FET Leakage Curr.
- The soft-start time is optimized internally and defined as turn-on time. (TYP: 0.6ms) ■OPERATIONAL EXPLANATION (Continued) <Current limiter, short-circuit protection> When the output current reaches the current limit value, the constant cu.
- If the over-current state lasts for 7.5ms (TYP.), the FLG pin changes to Low level output.
- When the over-current status finishes and th e status of that the output current is less than t he current limit value continues for 7.5ms (TYP.) or more, the voltage of FLG pin goes up “H” level again.
- If the reverse-voltage state lasts for 4ms (TYP.), the FLG pin changes to Low level output.
- If the output voltage remains lower than the input voltage for 4ms (TYP.), the FLG pin returns to High level output.
Topics covered by the datasheet
The document includes sections related to:
- XC8107_13 TOREX
Engineering review checklist
- Confirm repetitive reverse voltage, average forward current, surge current and leakage at the intended temperature.
- Check forward-voltage loss and reverse-recovery behavior at the actual current and switching frequency.
- Review package thermal resistance, copper area, polarity marking and transient derating before layout release.
Always confirm values against the latest manufacturer-controlled datasheet, especially when qualifying a substitute or releasing a production BOM.
View the complete PDF and model record
Open the XC8107BC05ER-G datasheet and model details to review the complete PDF, document pages and available product information.
Source attribution
Adapted from the PDF associated with this DigiCamel model page.
Source model URL: https://www.digicamel.com/product.php?slug=xc8107bc05er-g-torex-semiconductor